Mastercut Parts

This is a ball and joint assembly replacement for use with several types of lawn and garden equipment, including lawn tractors. The ball and joint assembly is an important part of the steering system in the machine. It helps to secure tie rod ends and drag links. If there is damage to the ball and joint assembly, it can cause a range of problems with the steering. This can make it impossible to properly operate the machine. Damage to the assembly could occur for a range of reasons. In some cases, it could simply be years of wear and tear plus corrosion. Other times, it could be damage caused while operating the machine. Issues with the ball and joint assembly should be repaired right away. This is a genuine OEM replacement part that can work for many machines, such as lawn tractors, lawn mowers, and snowblowers. It is compatible with a range of brands including Yard-Man, Troy-Bilt, Yard Machines, Craftsman, Bolens, Murray, Cub Cadet, Toro, and MTD.

This is a spring switch that is used in many types of lawn and garden equipment, such as log splitters, lawnmowers, and tillers. The spring switch is made out of durable metal and is typically located near the switch button. With ordinary use, the spring switch can experience wear or other types of damage and stop working correctly. When this occurs, it will need to be replaced.If the spring switch is broken or bent, a screwdriver will be needed to replace it. The lawn equipment should be powered off and placed on a stable surface during the replacement. Disassemble the unit and locate the contacts to access the spring switch and other small parts. The original switch can be removed using a screwdriver so the new component can be installed. Reassemble and power the tool on before use.This spring switch is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold on an individual basis. The part is made to be compatible with lawnmowers, snowblowers, tillers, log splitters, and wood chippers manufactured by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, MasterCut, and Turf King.

This tubeless air valve attaches to wheels, allowing air into and out of the tires on various lawn equipment. Regularly replacing this part is considered a part of routine maintenance. Make sure that you use appropriate pliers and other tools for easy installation. Be sure to use gloves when replacing these valves and work with caution so as not to damage the sensitive parts. This OEM tubeless air valve can be the perfect fit for compatible wheels on equipment such as lawn mowers, snowblowers, tillers, edgers, log splitters, and wood chippers. It is designed for use with select models from MTD, including Craftsman, Troy-Bilt, Bolens, Remington, Yardman, RYOBI, Husky, Power Pro, and many others. There is a limited parts warranty on this valve, which is made of durable rubber and metal and designed to offer a high-quality replacement. Sold individually.

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a thrust washer. It is a genuine replacement part made by MTD. Thrust washers are small but important component, allowing space between certain parts near and around the engine. Washers are typically used with screws and nuts to provide a tight and secure fit for many different parts in the machine.A new thrust washer might be needed if the current one is damaged or missing. Washers can become stripped over time due to friction and other motions inside the machine and need to be replaced. Be sure the engine is turned off before starting a repair. Typically washers are easy to replace and will only require a screwdriver or pliers.This thrust washer is a genuine OEM replacement part and is sourced directly from the manufacturer. Note that it is sold individually.

This shoulder screw is a genuine MTD part. It is manufactured as a replacement part for several models of lawn tractors, hi-wheel mowers, lawn tractors, and lawn mowers.Most shoulder screws will last for many years, but this one is made for compatibility with machines made in the 1980s and 1990s. For the machines this old, it is normal for the shoulder screws to become worn.This shoulder screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check whether more than one needs replacement. It is compatible with machines made by White Outdoor, Yard Machines, Ace, Wizard, Lawn Chief, Huskee, Husky, Statesman, Ranch King, Mastercraft, MTD Pro, Montgomery Ward, Cub Cadet, and Bolens.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This replacement part is a front axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Front axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the front wheels are stationed properly on the appliance.A new front axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for a lawn mower. The purpose of the axle assembly is to affix the wheels the appliance and to create an adjustable height mechanism for the deck of the appliance.The axle assembly might have to be replaced if it has been damaged or is malfunctioning to the point that it cannot perform its dual function. If any of the components loosen over time or if the axle assembly is punctured, scraped, cracked, or otherwise damaged, the axle assembly should be removed and replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, troy-Bilt, Yard Machines, Murray, Yard Man, MasterCut, and Huskee.