Maytag Microwave Tray & Related

The Cooking Tray Coupler is an OEM part replacement part for Whirlpool microwaves. It securely connects the two halves of the microwave cooking tray together, allowing for easy placement and removal of food items. 

Symptoms of a bad cooking tray coupler include:

• The cooking tray separating into two loose pieces that do not stay connected
• Food sliding off or falling through gaps in the disconnected tray halves 
• Inability to use the microwave cooking tray properly

Causes of a bad coupler can be cracks, breaks, or wear over time that compromises its connecting ability. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This coupler is compatible with the glass tray that has the 3 half circles that engage the coupler. In some cases, the factory used a tray that has 3 triangles. For that coupler, use part# W11245707.

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

The Microwave Coupler is an essential component for maintaining your Samsung microwave's performance. This genuine OEM part ensures a precise fit and reliable connection, compatible with a variety of Samsung microwave models. Crafted from high-quality materials, the coupler provides durable support, enhancing the stability and functionality of your appliance. By replacing a worn or damaged coupler with this genuine OEM part, you can restore your microwaveGÇÖs efficiency and prevent potential operational issues. Installation is straightforward, making it an ideal choice for DIY repairs and helping you save time and money. The Microwave Coupler not only ensures your microwave operates smoothly but also extends the lifespan of your appliance. Trust in this high-quality part to deliver dependable performance and improve your overall kitchen experience.

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

This factory support stabilizes and positions its mating assembly so it stays secure and aligned during use. Replacing a worn or broken support helps restore proper fit and prevents looseness or shifting that can affect performance. What it does

• Provides structural support and correct positioning for the related assembly
• Helps prevent wobble, sagging, rattling, or misalignment
• Typical failure signs: visible cracks, broken/missing tabs, or a loose fit
• Can help resolve components not staying in place or moving unexpectedly

• 1 support

• Disconnect power to the appliance before servicing
• Access the support location and note the original orientation
• Transfer and reuse any original mounting hardware your model uses
• Seat the new support fully and verify a secure fit before restoring power

The Microwave Roller Guide Assembly is an essential component for maintaining the smooth operation of your microwave. This genuine OEM part ensures compatibility with a wide range of Samsung microwave models, providing reliable performance and durability. The Roller Guide Assembly is designed to facilitate the effortless movement of trays or turntables, preventing jams and ensuring consistent rotation during use. Its high-quality construction guarantees long-lasting functionality, allowing you to restore your microwave's performance without the need for expensive replacements. Installation is straightforward, making it an ideal choice for DIY repairs and saving you time and money. By replacing a worn or damaged roller guide, you can enhance the efficiency of your microwave, ensuring even heating and a better cooking experience. The Microwave Roller Guide Assembly not only improves the functionality of your appliance but also extends its lifespan, making it a practical and cost-effective solution for keeping your kitchen equipment in top condition.

This replacement drive coupler connects the motor to the washer's drivetrain to restore normal agitation and spinning. Use it when the machine fails to drive or slips during cycles. What it does

• Transfers motor torque to the transmission/drive assembly so the tub can agitate and spin
• Commonly fitted when a worn or broken coupler causes no-spin or no-agitate symptoms
• Replaces a damaged or degraded plastic/rubber coupling that can crack or shear
• Helps stop slipping, unusually loud drive noises, or intermittent drive failures

• Disconnect power and water before any service; follow OEM safety precautions
• Basic hand tools are typically required; your model's service manual for disassembly steps
• Inspect the motor shaft and transmission input for damage when replacing the coupler
• If other drive components are damaged, replace them as recommended by the OEM

This support mounting bracket secures internal components and helps keep the appliance cabinet and panels aligned for reliable operation. It restores proper fit and prevents movement that can cause noise or wear. What it does:

• Provides structural support for the appliance cabinet or internal assemblies
• Keeps panels and components aligned to reduce vibration and rattling
• Helps prevent sagging or misalignment that can cause doors or panels to bind
• Supports stable operation after other hardware or clips fail

• Basic hand tools required; disconnect power before starting any repair
• Inspect surrounding clips and fasteners and replace any that are damaged
• Tighten to OEM torque ranges if specified; avoid over-tightening to prevent damage

This coupler connects the motor to the transmission to transfer drive force, restoring reliable agitation or spin. It's a direct-fit replacement that helps stop slipping and irregular spin caused by a worn or broken coupler. What it does:

• Couples the motor shaft to the transmission/driveshaft so the washer can agitate and spin
• Transfers torque from the motor to the transmission for normal cycle operation
• Worn or failed couplers can cause loud grinding, clunking, or loss of agitation/spin
• Replacing a damaged coupler eliminates slippage and restores proper drivetrain function

• One coupler

• Disconnect power and water before beginning any repair
• Installation may require removal of cabinet or access panels; follow OEM instructions
• Inspect adjacent components (motor mounts, transmission, clutch) while replacing the coupler

The Microwave Coupler Assembly is essential for maintaining the optimal performance of your Samsung microwave. This genuine OEM part ensures a precise fit and reliable connection within your appliance, enhancing its overall functionality. Designed specifically for Samsung microwave models, the coupler assembly facilitates seamless operation between critical components, helping your microwave run smoothly and efficiently. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and providing peace of mind. Installing the Microwave Coupler Assembly is straightforward, allowing you to restore your microwaveGÇÖs efficiency without any hassle. By choosing this genuine OEM part, you ensure compatibility and quality, which are crucial for the safe and effective operation of your appliance. Whether you are addressing a malfunction or replacing a worn-out component, the Microwave Coupler Assembly offers a dependable solution to keep your kitchen appliance running reliably. Trust in this high-quality part to deliver the performance you expect from your Samsung microwave, ensuring delicious meals are always just a few moments away.

The Microwave Roller Guide Assembly is an essential component for maintaining the smooth operation of your Samsung microwave. This genuine OEM part ensures precise alignment and stability for the microwave door, allowing it to open and close effortlessly. Crafted from durable materials, the Roller Guide Assy is designed to withstand regular use, providing long-lasting performance and reliability. Installing this assembly helps prevent misalignment and reduces wear on other microwave parts, extending the lifespan of your appliance. Compatible with a wide range of Samsung microwave models, the Microwave Roller Guide Assembly offers a perfect fit and easy installation process. Whether your original guide rollers are worn out or damaged, replacing them with this genuine OEM part restores your microwave's functionality and ensures optimal performance. Enhance your microwave's efficiency and durability with the reliable Microwave Roller Guide Assembly .

This OEM shaft-turn restores the rotating connection between internal drive components to help re-establish smooth, reliable rotation and reduce noise or slipping. Use when the original shaft is worn, bent, or damaged. What it does

• Transfers rotational force between drive components so drums, pulleys, or agitators can turn properly
• Helps maintain alignment and smooth rotation to reduce grinding, wobble, or vibration
• Replace if worn bearings or a bent shaft cause intermittent or no rotation
• Works as the direct mechanical link in assemblies that rely on a precision shaft

• One shaft-turn part

• Disconnect power and water before beginning any repair
• Follow the diagram for disassembly and reassembly steps
• Basic hand tools typically required; removal may involve detaching pulleys, motors, or housings
• Inspect surrounding bearings, seals, and fasteners and replace as needed for a complete repair