Maytag Wall Oven Knob, Dial & Button

Color: Black

The Knob is an OEM part for Whirlpool ranges. As the interface between user and appliance, knobs allow for temperature and function control.  

Causes of bad knobs are typically normal wear over time, breakage from impact or over-tightening, or issues with the connecting shaft or gear assembly.

Symptoms of faulty knobs can include:

• Loose, wobbly or difficult to turn motions
• Knobs detached completely from shafts
• Knobs stuck or unable to fully rotate through settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

This bezel knob replaces a worn, cracked or missing control knob bezel to restore a clean finished look and reliable control feel. It provides the tactile grip needed to select settings easily. What it does:

• Covers and protects the control shaft while providing a gripped surface for turning and selection
• Replaces cracked, faded or broken bezels that make controls hard to use or look worn
• Restores proper alignment and tactile feedback for accurate setting selection
• Matches the original black finish for a consistent appearance

• Always disconnect power (and gas when applicable) before servicing controls.
• Most installs simply pull the old bezel off and push the new one onto the control shaft—align splines before seating.
• If the control shaft or switch is damaged or loose, replace the underlying control assembly rather than forcing the knob.

This is a replacement white gas control knob that restores manual burner control and a finished look to the cooktop. Easy-to-grip design lets you set flame level precisely for safe, consistent cooking. What it does:

• Fits onto the range valve stem to turn gas burners on and off and adjust flame intensity
• Replaces cracked, melted, faded, or missing knobs that prevent proper control
• Helps stop accidental gas flow when a knob is stuck, damaged, or slipping on the stem
• Restores a uniform appearance to the cooktop when original knobs are worn

• One white gas control knob

• Turn off all appliance power and gas supply before removing or installing the knob
• Pull old knob straight off the valve stem; align new knob spline and push on until seated
• If knob is tight or won't seat, inspect valve stem for debris or damage; do not force
• If you smell gas or suspect a leak after installation, stop use.

This replacement control knob fits gas cooktops and restores intuitive control of burner flame settings for safe, consistent cooking. Made to match the OEM fit and feel for smooth, reliable operation. What it does:

• Replaces a cracked, stripped, or missing burner control knob so you can select low-to-high flame settings.
• Allows proper engagement with the valve stem splines for accurate temperature control.
• Helps stop slipping, wobbling, or a knob that won't turn or stay set.
• Restores a complete, easy-to-grip control surface for safer burner adjustments.

• One control knob for a gas cooktop valve stem.

• Turn off the cooktop and gas supply and ensure all surfaces and burners are cool before installing.
• Align the knob splines with the valve stem and push firmly until fully seated; do not force if it won't align.
• If you smell gas, stop and ventilate the area; do not install.

Color: Black

Color: Stainless

This replacement control knob restores user control and clear settings for range or oven functions, making it easy to select temperatures or cooking modes. It provides a direct-fit user interface for worn, broken, or faded knobs. What it does:

• Replaces a damaged, cracked, or missing control knob so you can turn settings smoothly
• Restores a visible indicator/pointer for accurate temperature or function selection
• Eliminates looseness or slipping that prevents setting changes
• Provides a direct-fit manual interface—no electronic repair required

• Disconnect power to the appliance before servicing to avoid electric shock
• Most knobs pull straight off the valve or shaft; align the splines/pointer and push firmly until seated
• If knob is stuck, gently pry with a flat tool while protecting the surrounding finish

A replacement black valve knob that lets you turn and set a range or cooktop control with a secure grip. Restores lost or damaged control knobs so settings can be changed safely and accurately. What it does:

• Fits onto a range/cooktop control shaft to provide a user grip for adjusting burner/valve settings
• Replaces cracked, melted, stripped, or missing knobs that won't turn or slip on the shaft
• Helps restore clear tactile feedback and detents for more accurate temperature/heat selection
• Compatible with shafts that accept this style of push-on valve knob

• One (1) black valve knob

• High-level: Remove the old knob by pulling straight off the control shaft; push the replacement on until fully seated
• Safety first: Always turn appliance controls off and disconnect power (and gas supply if applicable) before servicing
• Check shaft shape and alignment to ensure proper fit; do not force the knob onto an incompatible shaft
• If knob is brittle or binding, inspect the control shaft and switch for damage before use

Color: White

This control knob replaces a worn, cracked, or missing knob to restore manual control of your appliance's settings. It provides a simple, tactile interface so you can select cycles, temperatures, or power levels with confidence. What it does:

• Fits onto the appliance control shaft to allow easy adjustment of settings.
• Replaces damaged, melted, or stripped knobs that are difficult or unsafe to use.
• Restores secure grip and accurate selection of cycles or temperatures.
• Helps resolve symptoms like a loose, spinning, or non-engaging knob.

• Disconnect power to the appliance before servicing to reduce shock risk.
• Most knobs are removed and installed by pulling straight off and pushing the replacement onto the shaft; avoid excessive force.
• If the knob feels loose or won't engage, stop and verify shaft type and attachment method for your model.

This shaft-bit generator is a replacement drive shaft component that transfers motor rotation to the appliance's moving assemblies, restoring proper mechanical motion and reducing noise from damaged or worn shaft parts. What it does:

• Transfers rotary motion from the motor to the driven components for normal operation
• Helps maintain alignment and smooth rotation of connected parts
• Worn or broken units can cause grinding, rattling, or loss of movement
• Replacing a failed shaft can stop intermittent operation and restore reliable performance

• High-level replacement only: remove power before accessing internal assemblies
• Follow appliance-specific disassembly steps; secure panels and wiring before removing the old shaft
• Inspect adjacent bearings, seals, and mounting hardware; replace any damaged items