Mcculloch Leaf Blower Parts

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.

This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.

This part is a replacement recoil starter pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken recoil starter pulley in leaf blowers.The recoil starter assembly is essential for starting up the engine as it spins the flywheel in order to get the engine to power on. If this part is faulty, the engine may have trouble starting or may not start at all. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular recoil starter pulley, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This recoil starter pulley can be used with a variety of leaf blower models manufactured by Husqvarna, Poulan, and other brands.

This OEM carburetor is designed as a replacement for compatible leaf blowers. The carburetor takes in air and fuel and mixing them together before sending the mixture onto the engine to power the machine. The air comes in through an air filter to remove any impurities and then it passes into a smaller inner chamber, where fuel is injected through small holes in the chamber after also being filtered. Then, the two mix and are passed into the engine through an adjustable butterfly valve. If the engine isn't performing well or will start but won't stay running, the carburetor could be in need of replacement. It’s usually easier to replace the entire assembly than individual parts, and this genuine OEM part can provide the solution for machines it fits. This carburetor replacement is specifically designed to be compatible with select Craftsman, Poulan, and Husqvarna leaf blower engines. The carburetor does not include any gaskets or hardware required for replacement, so those will need to be purchased separately if they are required. Be sure that the engine is completely cool before beginning repairs and wear gloves for hand protection whenever performing engine work on any machines.

This screw is a genuine Husqvarna part. This screw has been discontinued by the manufacturer, but it still available in limited quantities. It is a genuine OEM part.This screw is very similar in size and color to many others that owners have in their home or shop, so it is imperative to store it separately or in some manner that differentiates it. Using the wrong screw or an incompatible screw may permanently damage or break the leaf blower. To use it, simply remove the old (presumably damaged screw) and replace it with this new screw, securing tightly with appropriate tools.It is made to be compatible with a McCulloch leaf blower, model number ASB3206. It is usually installed near the bottom of the blower. It may also be compatible with other brands of leaf blowers and other appliances that use Husqvarna parts, such as Craftsman, Poulan, and RedMax.

This part is a replacement insulator. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective insulator in a variety of backpack blower models. The insulator helps to protect the engine's carburetor from heat damage. If the insulator is not working sufficiently, the engine may overheat and become damaged. Thus, this part should be replaced if defective. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this insulator, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this insulator is suitable for use on several different models of gas-powered backpack blowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is an impeller and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is usually used in backpack blowers.A new impeller might be needed if the current one is damaged or broken in any way. If the user notices unusual noises coming from inside the machine, it is best to replace the impeller as often times it can become worn down due to normal wear and tear. It is recommended that work gloves be used to prevent injury during the repair. Be sure to refer to the specific owner's manual before replacing this part. This impeller is sourced directly from the manufacture and is a genuine OEM replacement part. This part is sold individually.

This replacement part is a shoulder harness and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is compatible specifically with leaf blowers and snow blowers. This shoulder harness attaches to the appliance and improves the user experience by making the appliance lighter to carry and easier to move. A new shoulder harness might be needed if the current one is broken or damaged. If the shoulder harness has been used a lot, it is not unusual that the harness can become worn down due to normal wear and tear. This should be a simple repair and no major tools should be required. If the original appliance did not come with a shoulder harness, it is recommended that one be purchased. This shoulder harness is sold individually and is sourced directly from the manufacture. This part is a genuine OEM replacement part and is compatible with many different types of appliances.

This part is a replacement nzle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective nzle in leaf blowers.The nzle helps the user to accurately direct the flow of air emitted from the blower. This part may become cracked or otherwise broken, requiring replacement for proper equipment use. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this nzle, the appropriate owner's manual and equipment diagrams should be referred to. This nzle is a genuine OEM part made of durable plastic and is sold individually. It is suitable for use with leaf blower models that have been manufactured by Husqvarna, Poulan, and other brands.

This replacement part is a gasket kit and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Gaskets are intended to fill the space in between different surfaces to prevent leaks and heavy friction. This keeps the machine running properly.If gaskets are loose or damaged, friction will build up and can possibly create excess heat. It is normal for gaskets to be damaged with use due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a replacement harness kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current harness kit is broken or defective, this part can be used as a replacement. It is intended for use with a variety of backpack blower models.This harness kit helps to properly fasten the harness together so the user can easily hold the backpack blower. If the harness is broken, this kit may be required to fix it. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this particular harness kit, the appropriate owner's manual and equipment diagrams should be referred to. This harness kit is suitable for use on a variety of backpack blower models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This J tube is used to attach the vacuum tube to the vacuum bag. In order for the leaf blowers to function correctly, the tubing needs to be in prime condition to seal the air moving through the machine. This will enable full functionality of the blower. It's made of a durable black plastic, and will need to be replaced if cracking or warping is experienced. Exposure to elements as well as general use will lead to a need for replacement over time. Replacement is needed if visible cracks or drying is seen in the tubing, or if noticeable difference in amount of air moving through the vacuum component is hindering full use. Replacement is simple, and doesn't require tools. Separate the old part from housing, and replace it with the new part. This part is compatible with the Poulan and Weed Eater brand leaf blowers and gas powered leaf blowers. The wave washer is an OEM part sourced directly from the manufacturer, and it is sold individually.