Parts for Ge JTP95BW2BB: 02 - Microwave Module Body Parts

This trim support bracket secures the oven or range trim assembly to keep the front trim and control bezel aligned and stable. It restores proper fit and reduces shifting or rattling of the trim pieces for a finished appearance. What it does:

• Holds trim and bezel panels in place to prevent gaps and misalignment
• Stabilizes the control panel and front trim during use
• Helps eliminate rattle or vibration caused by loose trim components
• Works as a replacement for worn or damaged trim mounting hardware

• One trim support bracket

• Disconnect power to the appliance before beginning any repair
• Minor disassembly of trim or bezels is usually required; keep fasteners organized
• Use basic hand tools and align bracket prior to tightening to avoid distortion

Fix a noisy or non-working convection fan with this motor assembly. Restores even heating and airflow in your oven. Takes about 30 minutes to install.

Replacement mounting nut secures components and panels inside your electric range or wall oven. Replaces stripped, lost, or damaged nuts causing loose parts.

This sensor cover C protects a refrigerator temperature/humidity sensor assembly and helps ensure accurate readings by shielding the sensor from direct airflow and debris. It's a simple replacement to restore proper sensor protection. What it does:

• Covers and protects the internal sensor housing from dust, splashes, and direct cold/hot air exposure
• Helps maintain correct sensor contact with the cabinet for reliable temperature sensing
• Can resolve symptoms like inconsistent temperature readings, uneven cooling, or a noisy/loose sensor area
• Matches OEM fit and form for direct replacement where specified

• High-level replacement; power off the appliance and unplug before accessing internal components
• Access typically requires opening the fresh food compartment and removing interior panels or trim
• Handle the small plastic cover carefully to avoid cracking; use non-marring tools as needed

This replacement cushion is a small rubber pad that cushions parts, reduces vibration and prevents metal-to-metal contact for quieter, smoother appliance operation. Fits in molded mounting locations to help stop rattles and protect finishes. What it does

• Absorbs vibration and reduces noise caused by moving parts.
• Prevents metal-to-metal contact that can cause wear or scratching.
• Helps keep panels, doors or components properly positioned.
• Commonly used where a soft stop or spacer is needed to eliminate rattling.

• One replacement cushion/pad.

• Disconnect power before servicing to avoid electrical hazard.
• Typically installs by pressing into the molded mounting slot or onto the stud—no special tools required.
• Confirm correct position and secure fit before restoring power or closing access panels.
• If adhesive residue or damaged mounting surfaces are present, clean or repair before installing for a secure fit.

Microwave won't power on or heat? A blown 15 amp fuse is often the cause. Requires removing unit from cabinet and outer cover to access and replace.

Seals around the front edge of your oven door liner. Replace if cracked, torn, missing, or no longer sealing properly to maintain heat efficiency.

Door trim shield assembly for wall ovens. Covers and protects the door edge area. Replace if cracked, broken, or missing for a complete appearance.

A small rubber cushion used to stop parts from rubbing together and to reduce vibration and noise. Fits where a soft spacer or bumper is needed to protect surfaces and improve quiet operation. What it does:

• Cushions contact points to prevent metal-on-metal wear and scratching
• Dampens vibration and helps reduce rattling or buzzing noises
• Keeps panels, doors or components properly spaced for smooth movement
• Helps protect finishes and prolong surrounding part life

• One cushion

• Install by pressing into the mounting hole or onto the peg until fully seated
• Inspect the mounting area and clean away debris before installing
• For appliance repairs that require disassembly, disconnect power at the breaker first
• If adhesive or clips are required, reuse the original hardware or replace with OEM-recommended fasteners

If your oven won't preheat or shows an F3 error code, this temperature sensor monitors oven heat and safety features. Direct plug replacement, 15-minute fix.

This mounting screw secures the microwave's magnet thermostat switch, keeping the switch firmly in place for reliable door/safety operation. A simple replacement to restore proper switch mounting and reduce loose or rattling components. What it does:

• Secures the magnet thermostat (magnetic door) switch to the appliance frame
• Restores proper switch alignment to help ensure correct door/safety sensing
• Helps stop loose or rattling hardware that can cause intermittent switch contact
• Small but essential fastener for safe, reliable microwave door operation

• Disconnect power (unplug or shut off breaker) before accessing microwave internals.
• Use appropriate hand tools; avoid overtightening to prevent stripping threads or damaging the switch.
• Keep small parts away from children and pets; handle the thermostat switch carefully—do not drop or bend it.

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.