Montgomery Ward Parts

Fix transmission engagement issues with this right actuating arm. Controls clutch and brake operation on lawn tractors. Direct-fit replacement part.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Battery retainer strap secures the battery in place on lawn tractors and walk-behind mowers. Replace if cracked, broken, or missing to prevent damage.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This switch spring is part of the safety system used in riding lawnmowers. This spring is located underneath the seat of all riding lawn mowers and lawn tractors. The spring is attached to two electrical contacts and is compressed when the rider is sitting on the seat. If the machine is in motion and the driver stands up or gets off the machine, the switch interrupts the power and stops the mower from moving. If the spring fails to work, it should be replaced in order to operate the mower safely. Over time and due to normal wear and tear, the spring may become warped and need to be replaced. Park the mower on a flat surface and remove the spark plug so that the lawnmower is not powered on. Look underneath the seat and locate the kill switch with a two-wire plug on one end and a round plunger button on top. Grip the wire plugs and pull them away from the switch spring. Install the new switch spring. Reattach the wires and reinstall the spark plugs. This switch spring is an authentic OEM replacement part sourced directly from the manufacturer. It is a silver metal part that is designed for use in lawnmowers manufactured by MTD, Ryobi, Bolens, Yard-Man, Troy-Bilt, Husky, and Cub Cadet.

Ratchet fastener for lawn mowers and tractors. Secures components in place. Replace if broken, stripped, or missing to properly fasten parts together.

Rear discharge flap for walk-behind lawn mowers. Attaches to the back of the mower deck to contain grass clippings during operation. Replace if cracked or torn.

Replacement chute flange keeper for snow throwers. Secures the discharge chute assembly to the housing. Replace if broken, cracked, or missing.

Plastic tube for lawn tractors. Installs in mower chassis for fluid routing or cable guide. Replace if missing, cracked, bent, or damaged during use.

Protective cap that covers and secures the axle end on lawn tractors and mowers. Replace if cracked, broken, or missing to prevent debris entry.

Extension spring for lawn tractors and walk-behind mowers. Installs on brake, drive, or deck assemblies. Replace if stretched, broken, or missing.

Replacement wire that securely attaches the rear skirt trail shield to your lawn mower deck. Replace if broken, detached, or missing for proper skirt fit.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

Metal spring washer designed to absorb vibration between nuts and surfaces on lawn mowers and garden equipment. Replace when worn or flattened.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.