Parts for Husqvarna 96732390100: Mower Deck / Cutting Deck Parts

This right hand mandrel cover is a genuine Husqvarna part, sold individually. This right hand mandrel cover can be used as a replacement part in a lawn mower. The purpose of the right hand mandrel cover in a lawn mower is to house and protect the mandrel assembly, which rotates the blades of the lawn mower during typical operation.If the right hand mandrel cover is dented, cracked, warped, eroded, or otherwise damaged to the point of exposing the mandrel assembly, the right hand mandrel cover should be removed and replaced by this genuine OEM replacement part in order to continue safe use of the lawn mower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. right hand mandrel cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a mandrel cover. It is a genuine replacement part made by Husqvarna. This cover is connected to the lawnmower so that it can protect the parts inside the machine. This also helps in keeping the user safe as it covers the things underneath that can be harmful. This cover is made of durable plastic. A new mandrel cover might be needed if the current one is damaged in any way including being dented or cracked. It is common that the sides of the mower are exposed to rough debris such as gravel or rocks and can become damaged over time. If the cover is unable to stay attached to the lawnmower, be sure to replace it immediately. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure a proper fit.

The Husqvarna belt keeper is a small, metal part designed to be used for lawn tractors. It is used to stabilize the belt with minimum friction on the belt itself. The belt keeper is secured in place using a washer, nut, and bolt. It is secured to the engine pulley. This is an OEM part sourced directly from the manufacturer. It is sold individually.The belt keeper is an essential part to the mower. If there is too much friction placed on the belt itself, it could result in a fire in the engine. This part can break loose and become damaged if not installed correctly. If this part is damaged or falls off, it is recommended to replace it prior to next use of machine to avoid further damage to the mower. All safety precautions should be taken when replacing parts including work gloves to protect the hands, eye glasses, and ensuring there is no power to the machine being worked on.This part is compatible with all Husqvarna produced brands that require this part. These brands include AYP, Craftsman, Jonsered, McCulloh, Poulan, Poulan Pro, RedMax, Dixon, and Weed Eater.

This part is a center front baffle. A baffle is connected beneath the lawnmower deck to help with the airflow. The baffle helps direct the grass clippings out to the discharge chute, into the grass clipping bag, or out as mulch. A new center front baffle may be needed if the original has been broken, cracked, or damaged in any way. The center front baffle is most commonly damaged by impact when it has run into something, such as a stump or concrete. The lawnmower operator may notice that the grass clippings are clumping up or not properly coming out of the discharge chute.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This center front baffle is compatible with lawnmowers and riding lawn tractors manufactured by Husqvarna, Poulan, and Jonsered.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This replacement part is a reinforcer plate. This is a genuine replacement part made by Husqvarna. This part commonly attaches to the deck of the lawnmower. The reinforcer plate helps ensure that parts are completely secure and properly attached during use. A new reinforcer plate might be needed if the user notices that parts are not attached properly. If parts of the lawnmower are coming loose it is best to replace the reinforcer plate so that everything is secure. This repair should be simple and only require common household tools such as a screwdriver.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This replacement part is an eye bolt, or sometimes called a lawn mower bolt, intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Eye bolts are an important part in many lawn mowers as they are responsible for keeping different parts in place and secure so that the user is safe while operating the appliance.A new eye bolt might be needed if the current one is damaged or broken in any way. It is also possible for the eye bolt to become loose or stripped overtime and will need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This part is a replacement hex head screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced screw on outdoor power equipment, although this screw is primarily intended for use with lawn tractors.Screws are a standard piece of hardware with multiple different uses. They are essential for holding together equipment components but can easily become lost, stripped, corroded, or otherwise damaged. In this case, screws will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex head screw, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex head screw is suitable for use on several models of small engine outdoor power equipment and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This buttonhead screw is a genuine Husqvarna part. This buttonhead screw is a genuine OEM sourced part from the manufacturer. Users will need an Allen wrench or a hex key to install this buttonhead screw. A buttonhead screw is a type of cap screw that is characterized by its hexagonal drive hole and cylindrical head.Since it is a screw, it is likely to resemble other products, so users should exercise caution not to mix it up with others. It is important to use well-fitting, specially designed screws on appliances such as lawn mowers and tractors.It is compatible with the Jonsered lawn tractor YT46-96043019700, the Jonsered Z46R lawn mower zero turn consumer, and the Jonsered Z46R-967327801 lawn mower zero turn consumer. In addition, it can be used with the Poulan tractors model numbers 96042016700, 96042016900, and 96042017000, as well as a Husqvarna tractor and two models of Husqvarna zero turn mowers. This buttonhead screw may also be compatible with products lawn mowers by AYP, Craftsman, McCulloch, Poulan/Poulan Pro, RedMax, and Weed Eater.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of a nut in a lawn mower is to serve as a small fastening component used in conjunction with a bolt.The nut in a lawn mower can be easily lost, misplaced, or stripped away from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb. The nut could be dented, punctured, scraped, cracked, chipped, or otherwise damaged to the point that it loosens from its placement and cannot be secured. If this occurs, the nut should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This hex nut is a genuine Husqvarna part, sold individually. This hex nut can be used as a replacement part in a lawn mower. The purpose of the hex nut in a lawn mower is to secure a component to another component in conjunction with a bolt so that, during the standard operation of the lawn mower, the components do not move from their position of stable placement.The hex nut in a lawn mower is a small component, and its size means that it can be easily lost, misplaced, or stripped from general wear and tear with long-term use. The hex nut could also be damaged as a result of a collision with a hard object such as a rock or a curb. If any of this occurs, the hex nut should be replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This replacement part is a washer. Washers typically work with other small parts like screws or nuts to secure components within equipment.Over time and with regular use, washers can occasionally become worn down or damaged, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.