Parts for Craftsman 247372650: Mower Deck Parts

Flat washer for lawn mowers and outdoor power equipment. Replace if washer is missing, damaged, or corroded to ensure proper fastening and fit.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.

Shield mounting screw for lawn mowers and riding tractors. Secures protective shields and covers. Replace if stripped, missing, or damaged during maintenance.

This idler pulley is a genuine MTD part, sold individually. This idler pulley can be used as a replacement part in a lawn mower. The purpose of a idler pulley in a lawn mower is to guide the rotation and motion of the drive belt while the appliance is in use by the operator so that the wheels of the appliance can be rotated to propel the appliance across a variety of surfaces.If the idler pulley is dented, cracked, punctured, scraped, warped, or eroded to the point of reduced or no functionality, the idler pulley should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, so that safe use of the appliance can be guaranteed for the safety of the operator.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This idler pulley is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

Needle bearing for lawn mowers and outdoor power equipment. Replace if you notice excessive noise, wobbling, or rough operation. Verify fit with your model.

Shield mounting screw for lawn mowers and tillers. Secures protective shields and covers to the mower deck. Replace if screw is stripped, missing, or damaged.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

Hex washer head screw for lawn mowers and snow blowers. Replace worn, stripped, or missing fasteners on deck, housing, or engine components.

Fix lawn mower vibration or loose components with this block bushing. Facilitates smooth rotational movement and secures internal machinery. Easy DIY fix.

This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.

Hex screw fastener for lawn mowers and outdoor power equipment. Replace if lost, stripped, or damaged during maintenance. Sold individually.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Self-tapping screw for lawn mowers and outdoor power equipment. Replace if stripped, missing, or damaged during maintenance or repairs. Standard fastener.

Protective hub cap for walk-behind lawn mower wheels. Shields the wheel hub from dirt, debris, and moisture. Replace if cracked, broken, or missing.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

Hex washer head screw for lawn mowers and outdoor power equipment. Secures panels, covers, and components. Replace if stripped, missing, or damaged.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.