Parts for Husqvarna 917279060: Mower Deck Parts

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This stripper mandrel is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A stripper mandrel is a type of mounting bracket. It is designed for use with outdoor lawn and garden power equipment, specifically for lawn mowers and lawn tractors. It is compatible with products by brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Dixon.The stripper mandrel part is crucial because it acts as a mounting bracket between the tractor's mandrel assembly and mower deck. It also is designed to protect the mandrel housing and bearing by blocking debris and preventing grass from building up on the mandrel housings. The purpose of the stripper mandrel is to keep the lawn mower or lawn tractor running optimally. The replacement or repair process of the stripper mandrel should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This stripper mandrel is black and round, and it is made out of metal.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

Metal push nut secures components on riding mower tractors. Replace if worn, damaged, or missing to restore proper fastening throughout equipment.

This replacement deflector shield is a genuine OEM part intended for use on lawn mowers and tractors. It attaches to the side of the mower and directs grass clippings away from the blade as it mows. This serves to keep grass from bunching up in the blade, which could cause it to stall out. The direction of the deflector shield also blows grass clippings behind the mower to keep any potentially hazardous debris from flying up at the mower. Deflector shields can become dried out and brittle over time and can snap off if the mower drives too close to a wall, tree, or other hard object. Deflector shields usually only need replacing if they break. This would cause grass clippings and debris to fly in all directions, which could be dangerous for the user. Replacing the deflector shield is an easy repair and only requires a socket wrench set. This part is compatible with a wide variety of Husqvarna and Craftsman lawn mowers and tractors and is sourced from the original manufacturer. This product ships individually.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Deck idler pulley guides the mower belt on riding lawn tractors. Replace if belt slips, falls off, or pulley wobbles. Confirm fit with your model number.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Belt guard guides and protects drive belts on riding mowers and lawn tractors. Replace if cracked, broken, or missing to prevent belt damage and ensure safe operation. Verify fit with your model number.

Deck nose roller attaches to the front of your riding mower deck to prevent ground contact and wear. Replace if cracked, broken, or worn for smooth operation.

Replacement bolt for lawn tractors, riding mowers, and walk-behind equipment. Secures components together. Replace if missing, stripped, or damaged.

Shoulder bolt for lawn tractor mechanical assemblies. Enables rotation in gears, pulleys, and moving parts. Replace if worn, stripped, or missing.

Gauge wheel that mounts to the mower deck to control cutting height. Replace if cracked, worn, or missing for proper deck leveling and support.