Mtd Edger Parts

Replacement fuel cap for lawn tractors, trimmers, blowers, and tillers. Prevents fuel leaks and evaporation. Replace if cracked, broken, or missing.

This is a replacement belt that can be used on select edger/trimmer models of lawn and garden equipment. This is the main drive belt that is responsible for driving the trimmer blades. Belts are made of rubber and exposed to constant and repetitive motion, which can cause them to stretch or wear out over time. Eventually, they may become so loose or damaged that they will not be able to drive the blades and will need to be replaced. Without a properly functioning drive belt, the trimmer blades will not work. A genuine replacement part like this provides an exact fit for compatible units. This OEM drive belt is manufactured by MTD and can be used with select models of trimmers from the brand and a few models from Troy-Bilt, as well. This belt is sold as an individual unit and does not include any additional components or hardware. In order to replace the drive belt, a set of wrenches is required. It is advised to clean the pulleys before installing the new belt to ensure optimal performance and extend the life of the belt. Be sure to disengage the engine and wear gloves when replacing this belt or other internal parts.

Spindle pulley attaches to the drive belt and blade assembly in edgers. Replace if pulley is cracked, worn, or damaged to restore proper belt tension.

Replacement idler pulley for outdoor power equipment. Installs on the deck assembly to guide belts. Replace if cracked, worn, or spinning rough.

Skid shoe that mounts to the bottom of your snow blower housing. Replace if cracked, bent, worn down, or missing to protect the auger housing surface.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

Rope won't retract after pulling? This recoil starter spring restores proper rope tension in lawn equipment engines. Essential starter assembly component.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

This fuel tank is a genuine OEM part sourced from the manufacturer. It is commonly used on chippers, lawnmowers, lawn tractors, and other lawn and garden equipment that is powered by gasoline. The fuel tank is attached to the carburetor with a hose and clamp. The fuel tank has a vented fuel cap to help keep a vacuum from developing in the fuel line. If a vacuum develops, the fuel will not flow from the fuel tank to the carburetor. The fuel tank is made of non-corrosive plastic to prevent deterioration from the fuel.Inspect the fuel tank periodically for signs of deterioration. If there are any cracks or flaws that could become cracks, replace the fuel tank. Leaking fuel not only reduces the performance of the engine but can also be a safety hazard. Before replacing the tank, the fuel should be run dry or pumped out. Remove the spark plug to prevent accidental engine ignition while the fuel tank is replaced. This fuel tank is sold as an individual unit. It is designed for use with lawnmowers, lawn tractors, and many other small engines that are powered by fuel. This fuel tank is compatible with equipment made by MTD, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, and Husky.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This flange bearing fits tightly between two connected components to create an airtight seal in a variety of types of lawn and garden equipment. With time and use of the equipment, the flange bearing can start to become damaged, break, or may be lost. When this occurs, the flange bearing will need to be replaced.Place the equipment on a flat surface and disconnect the spark plug wire. The location of the flange bearing will vary based on the equipment being used, so condult the user manual. Disassemble the tool as needed to get access to the flange bearing. It can be removed using a set of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Replace the components and connect the spark plug wire.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual item. The flange bearing can be used with lawnmowers, edgers, and snowblowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Montgomery Wards, Yard Machines, and MTD.

This is a throttle body intended for use with lawnmowers and tractors. The throttle body is attached to the control cable, the throttle control wire, and the throttle lever. It can be damaged or wear out with regular use. Signs that the throttle body is failing or going bad include a very low idle or poor idle. Stalling of the machine when stopping the device is another indicator that the throttle body is bad. When this happens, a new throttle body must be installed.Replacing a throttle body is simple. It requires a set of pliers, a wrench, and a screwdriver. Always wear gloves when working on a throttle body repair. Make sure to allow time for the machine to cool completely before beginning the repair.This throttle bottle is an authentic OEM part. It is supplied directly from the manufacturer. The throttle body is made of high-quality, durable plastic material. It is sold as an individual unit. The throttle body is compatible with Huskee, MTD, Yard Machines, Yard-Man, and Cub Cadet brands. It can be installed in various machines, including push-behind lawn mowers, lawn tractors, and other lawn equipment."