Mtd Engine Parts

Fix engine starting problems or loss of compression with this valve spring. Controls valve timing in small engines. Common repair for lawn tractors and snow throwers.

Seals cylinder and piston to prevent combustion gas leaks. Replace if engine uses excess oil, loses power, or has poor compression. Verify fit.

This carburetor repair kit is a genuine OEM replacement part for a wide variety of tiller and chipper engines. The carburetor is one of the most essential parts of an engine. It is responsible for mixing a balance of oxygen and fuel for combustion. If the carburetor is damaged, the engine will not produce the right about of combustion and may not start. This kit is for service the carburetor if it becomes damaged. This kit contains a valve needle, jet nozzles, a float and float pin, o-rings and gaskets, and fuel drain plug—everything needed to fix a carburetor. To make repairs to the carburetor, you will need a set of screwdrivers and socket wrenches. The repair will depend largely on what appliance you are fixing, so be sure to follow the instructions in the user's manual. Before making any repair, be sure to allow the engine to cool completely and drain it of excess fuel. This part is designed for tiller and chipper engines made by Cub Cadet, MTD, Troy-Bilt, and Yard Machines. This part is sourced direct from its original manufacturer and ships individually.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

Replacement muffler stud assembly for lawn tractors and walk-behind mowers. Secures exhaust system components. Replace if damaged, stripped, or missing.

Engine bearing reduces friction between rotating and stationary engine parts. Replace if damaged or worn to prevent overheating. Verify fit with your model.

This is a clutch cover for a lawn tractor. The clutch cover attaches to the flywheel and either connects or disconnects the power through the clutch disc. A well-balanced clutch cover ensures proper rotation and heat radiation. The disc is pressed against the flywheel by the clutch cover to allow for rotation. This is a genuine OEM part and is sold individually. Generally, a clutch assembly should be replaced when there are symptoms of clutch wear. Clutch slippage can manifest by shuddering or shaking, while chirping or grinding noises also indicate there are issues. This indicates that the pressure plate is worn. As a result, all the clutch parts should be replaced together, including the clutch cover. This will ensure proper power to the engine. To replace the clutch assembly, be sure to check the owner's manual, as not all are assembled the same. This part is compatible with several brands, including Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

Replace your lawn mower engine breather gasket to prevent oil leaks and maintain proper crankcase ventilation. Verify fit using your model number.

Engine won't start or runs rough? This choke linkage rod connects the carburetor choke to the control lever. Fits lawn mower and tractor engines.

This part is a throttle linkage that is used on lawn tractors. The throttle is a means of controlling the engine by controlling the amount of fuel and air that enters the engine.A new throttle linkage may be needed if the pedal is hard to press, if the pedal does not release as it is supposed to, if the engine stalls, or if there is a delay in the response when the pedal is pressed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This throttle linkage is a genuine MTD part. It is sold individually. This particular throttle linkage is compatible with lawn tractors that are manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

Engine running louder than normal? This muffler assembly reduces exhaust noise on lawn tractors. Metal construction for long-lasting performance.

Replacement muffler mounting stud for lawn mowers and tractors. Secures exhaust muffler to engine block. Needed when original stud is stripped or broken.

This is a piston ring set designed for a lawn mower engine. The rings seal the piston within the cylinder to maintain compression and control oil consumption during operation. Replace this set if your engine has lost compression, burns excessive oil, produces blue or white exhaust smoke, or has noticeably reduced power.

Fix engine power loss or excessive smoke with this replacement piston. Transfers combustion energy to mechanical power. Restores proper engine function.

This replacement part is a gear. This is a genuine replacement part made by MTD. This part is small but very important to many machines. Gears have ridges that are connected to other parts and are able to rotate or turn in specific ways so that the engine operates smoothly. A new gear might be needed if the current one is stripped down due to friction over time. Due to the nature of the gear, it is not uncommon that this part should need to be replaced eventually. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.