Mtd Gold Lawn Mower Parts

A fuel tank cap assembly prevents contaminants and particles from entering the gas tank and causing problems with the carburetor or engine. The cord between the insert and the fuel cap is meant to prevent the loss of the fuel cap. However, over time the cord can wear out and break. The threads on the cap can also become worn down or swell from heat. When this occurs, consider replacing the fuel tank cap assembly. The replacement job is easy and should not need any tools, except maybe some vice grips to remove the old fuel tank cap assembly. This fuel tank cap assembly will work in conjunction with many different types of lawn and garden maintenance equipment. Most have a small engine, like lawnmowers, tillers, and log splitters. Some of this equipment is produced by the brands Craftsman, Cub Cadet, Honda, Huskee, Lawn-Boy, Mastercut, MTD, Murray, Troy-Bilt, and Yard Machines. It is a genuine OEM part.

Mulch kit for 42-inch lawn tractor decks. Includes baffles and hardware to convert your mower for mulching. Replace worn or missing components.

Complete 46-inch mulching blade kit for lawn tractors. Includes blades designed to finely chop grass clippings. Replace worn or damaged blades.

This cover is a genuine MTD part, sold individually. This cover can be used as a replacement part in a lawn mower. This cover helps to protect the mower from exposure to dust and the elements.If the cover is punctured, ripped, torn, or otherwise leaves the lawn mower exposed, the cover should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This cover is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Graphite coating lubricant for lawn mowers and garden tractors. Reduces friction on moving parts. Replace when lubrication diminishes. Confirm fit.

This is an authentic exhaust tube assembly that is used with many models of lawnmowers. The purpose of the exhaust tube is to take any condensation found in the tank and move it away from the lawnmower. The exhaust tube is an integral part of the lawnmower and ensures it runs at its best. It removes excess moisture from the equipment and lets it out into the air. Over time, the exhaust tube assembly can become damaged or cracked and will need to be replaced.If the lawnmower exhaust tube assembly is damaged or broken, it should be replaced. The lawnmower should be turned off and the spark plug wire must be disconnected before beginning. Put the mower on a flat, sturdy surface to begin the replacement process. Work gloves and an adjustable wrench will be needed to replace this part. Unscrew the tube and remove it from the lawnmower before installing the new part.This exhaust tube assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. This part is designed to be used with lawnmowers created by Yard-Man, Craftsman, MTD, Cub Cadet, and Troy-Bilt.

If your riding mower has excessive noise or exhaust fumes near the engine, a damaged exhaust tube assembly may be the cause. Moderate DIY repair.

Steering wheel for riding mowers and lawn tractors. Mounts to the steering shaft to control direction. Replace if cracked, broken, or missing.

Mulch plug assembly for gas walk-behind mowers. Blocks the discharge chute to enable mulching mode. Replace if cracked, broken, or missing.

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

This is a rear discharge baffle assembly that mounts inside the mower deck to direct grass clippings out the rear discharge opening. It helps control airflow and clipping distribution during mowing. Replace this assembly if it is cracked, bent, corroded, or missing, which can cause uneven clipping dispersal or clogging of the discharge area.

These are 8-inch front drive wheels designed for self-propelled lawn mowers. They provide traction and forward movement when engaged with the drive system. Replace these wheels if they're cracked, worn down, or if your mower has difficulty moving forward on its own.

Pivot arm assembly that controls wheel movement on lawn mowers and chippers. Replace if the original is cracked, bent, broken, or causing alignment issues.

This replacement part is a lever assembly. This part is a genuine replacement part made by MTD. This part is able to act like a normal lever and adjust certain things within the lawnmower so that it may function properly during use. A new lever assembly might be needed if the current one is missing or damaged in any way. This can be due to normal wear and tear over time. If the lever has become stripped down, be sure to replace it as soon as possible. It is recommended to refer to the appropriate user manual before attempting to replace this part. Be sure to wear work gloves during this job as parts can cause injury. This lever assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Mounting bracket assembly for lawn tractors and riding mowers. Connects and secures components in place. Replace if cracked, bent, or broken.