Mtd Gold Tiller Parts

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Hex flange bearing supports rotating shafts in riding mowers and tractors. Replace when you notice grinding noise or rough rotation. Verify fit with your model.

This is a plastic fuel tank that stores gasoline for a small engine used in lawn and garden equipment. It connects to the fuel line and carburetor to supply fuel for combustion. Replace this tank if it is cracked, leaking fuel, or has become warped or brittle from age and sun exposure.

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Left hand inner tines assembly for tillers. Installs next to outer tines on the left side. Replace if tines are worn, bent, or broken from soil cultivation work.

Tiller not digging or tilling properly? This tine assembly digs into soil to break up and cultivate ground. Direct fit replacement for multiple models.

Replace broken or bent tiller tines that fail to dig properly or cultivate soil effectively. Direct fit tine assembly restores ground penetration.

Rotating tine assembly for front-tine tillers. Mounts to tiller axle to cultivate soil. Replace if tines are cracked, bent, or worn from rocks and debris.

Wheel bracket assembly for tillers. Secures and stabilizes wheels in place during operation. Replace if cracked, bent, broken, or worn for proper wheel support.

This is a replacement hex screw sourced from the manufacturer. The hex screw is used in numerous machines, including lawnmowers, tractors, and tillers.Hex screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to mower and cause other parts to need replacement.Before checking the screws, make sure the mower has cooled off to avoid burns. They can be tightened with a rachet or an adjustable wrench. The hex screw is a genuine OEM replacement part. It is designed to be used with Craftsman, Troy-Bilt, Cub Cadet, MTD, Yard Man, and other brands.

Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.

Replacement truss head tap screw for lawn equipment engines. Secures various engine components. Replace if missing, stripped, or damaged during maintenance.

Flange lock nut for lawn tractors and riding mowers. Replaces worn, stripped, or missing nuts. Features integrated washer base for secure mounting.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

Fix a tiller that won't engage or disengage properly with a new clutch collar. This component ensures smooth clutch operation for reliable tilling performance.