Mtd Gold Tractor

This is an authentic OEM replacement flat washer that has been sourced directly from the manufacturer. It is used with bolts and screws for fastening components on various lawn and garden equipment parts. Flat washers spread the load of the bolt or screw or are used if the hole for the fastener is larger than necessary. The washer fills in the gap, making it more secure. Washers may also be used to prevent the bolt or screw from coming in contact with the component and creating heat or friction that could damage the part. Flat washers are found underneath the head of the bolt or screw, between the fastener and the connected component. Washers may rust or break over time. These changes are visible, and a replacement washer should be installed when necessary.The tools required to remove the bolt or screw depend on what type it is. Wear work gloves when removing and replacing parts. Broken or frayed metal edges can cut. Use the appropriate tool to loosen and remove the fastener. Slide the washer off and place the new one on. Reinstall the bolt or screw and tighten. The flat washer is made of durable metal and sold as an individual component. The flat washer is compatible with chippers, shredders, lawnmowers, tractors, blowers, and other lawn and garden tools manufactured by Craftsman, Bolens, Yard Machines, Troy-Bilt, MTD, Yard-Man, and more.

This double pulley is a genuine MTD part, sold individually. This double pulley can be used as a replacement part in a lawn mower. The purpose of a double pulley in a lawn mower is to facilitate rotation and movement of the belt that controls the deck pulley and the blades.The double pulley in a lawn mower might have to be replaced if the double pulley shows clear signs of damage, which can manifest in the form of scrapes, dents, cracks, punctures, or some form of warping that can reduce or negate the functionality of the component. If this occurs, the double pulley should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This double pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard Man, Montgomery Wards, and Huskee.

This lawn mower battery brace is compatible with Craftsman, MTD, Kmart, Troy-Bilt, and Yard-Man brands. The battery brace holds the battery in place creating a sturdy surface for the battery terminal to connect to the mower. Without a battery brace, the battery would be able to b around creating an unstable environment for the battery terminal connections, and could cause worse things like a battery leak or a fire. The more vibration the battery is exposed to the shorter its life will be, and an unsecured battery will void the warranty. If the battery terminals become too corroded, mix 1 cup of water and 1 teaspoon of baking soda until the baking soda is dissolved. Then pour the mixture over the battery terminals to dissolve any corrosion. Batteries are toxic, so when changing a battery out, properly disposing of it is recommended. When installing a new battery, place a small amount of petroleum jelly onto the battery terminals to prevent the battery from developing corrosion. After installing a new battery, make sure to securely mount the battery brace, to ensure the battery has a long life and is secure. This is a genuine OEM part sourced directly from the manufacturer and sold individually.

This replacement part is a deck idler bracket intended for use in lawn mowers. This is a genuine replacement part made by MTD. Idler brackets are an important part of lawn mowers in general. This part assists in the steering of the machine. A new deck idler bracket might be needed if the current one is damaged or broken in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. To replace this item the user will need simple household tools including a screwdriver and possibly pliers.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This part is a spindle pulley assembly that is used on lawn tractors. The spindle pulley assembly includes the mandrel, the shaft, and the pulley. The spindle is the post to which the blade attaches to and spins when the lawn tractor is being used.A new spindle pulley assembly may be needed if the original is missing from a new lawn tractor. If any component of the spindle pulley assembly is cracked, damaged, or broken, the entire spindle pulley assembly will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This spindle pulley assembly is a genuine MTD part. It is sold individually. This particular spindle pulley assembly is compatible with lawn tractors that are manufactured by MTD, Troy-Bilt, Yard Machines, Husky, and Murray.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.