Mtd Lawn Mower Deflector & Chute

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement chute is an authentic OEM part for a lawn mower. The chute attaches to the side of a lawn mower, and as the blade cuts grass, it pushes the clippings towards the chute. The chute then sprays grass towards the back and side of the mower. These clippings can be left as nutrient rich compost for the lawn or the operator can go around and pick up the clippings for a stately, professional look. Chutes are made of a durable reinforced plastic, but because they are attached on the outside of the mower and protrude to the side, they can easily be rammed into trees, walls, and other obstacles. If hit too hard, the chute will tear off and grass will spray unevenly across the lawn. Fortunately, chutes are easy to replace. This repair will only require a socket wrench for disassembly and reassembly. As a top-quality replacement part, this chute comes sourced directly from the original manufacturer. It is compatible with Craftsman and Troy-Bilt lawn mowers. This part does not include any of the hardware required for assembly. Therefore, be sure to not lose the bolts removed during disassembly.

The discharge chute assembly is located on the deck of the lawnmower. It is made out of durable plastic but can be damaged by impacts. It also can experience wear and tear that make it break or become weaker. If the discharge chute is broken or damaged, it will need to be replaced. Usually, the discharge chute will have visual wear or damage that alert a user to replace the part.The replacement of a discharge chute assembly is simple and takes only a few minutes. A socket set will be needed to go through the process. The original discharge chute assembly can be removed using the socket set. Replace it with the new replacement part. Before replacing the parts, make sure the lawnmower is powered off, and the spark plug wire has been disconnected.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. This discharge chute assembly is made for use with lawnmowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This bagger chute is a genuine MTD part, sold individually. This bagger chute can be used as a replacement part for a lawnmower. This bagger chute collects all of the grass clippings assembled from a standard lawn mowing so that the clippings can be stored and later converted into mulch to keep the lawn healthy. The bagger chute might have to be replaced if it can no longer hold the grass clippings in order to later convert them into mulch. This can occur if the bagger chute is punctured, torn, ripped, scraped, or eroded so that the grass clippings fall out of it. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This Bagger chute is compatible with the following outdoor appliance brands: MTD and Yard Man.

This discharge chute is a genuine MTD part, sold individually. This discharge chute can be used as a replacement part for a snowblower. This discharge chute provides a channel for the passage of snow that has been cleared out of the way by the snowblower so that the snow does not pack up tightly or blow in the face of the operator. The discharge chute of a snowblower might have to be replaced if it is not properly collecting and discharging snow or if the snow is packed too tightly to discharge properly. This could occur if the discharge chute has undergone too much scraping, scratching, or collision with the hard surfaces upon which it might be dragging. If this is the case, the discharge chute should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This discharge chute is compatible with the following outdoor appliance brands: MTD and Craftsman.

This side discharge chute is a genuine MTD part. A side discharge chute can be used as a replacement part for a lawn mower.If the side discharge chute detaches from the lawn mower and cannot be affixed back or if it suffers any other form of damage that reduces its functionality, it should be removed and replaced by this genuine OEM replacement part. A prompt and appropriate replacement process will ensure safe continued use of the appliance by its operator.This is a genuine OEM replacement, directly from the manufacturer. It is sold individually. This side discharge chute is compatible with equipment from MTD and Troy-Bilt.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

A train shield is found on many walk-behind lawn mowers. It is located on the rear side of the lawn mower. The function from the position where it is mounted is to keep grass from expelling from the mower deck. With use or as a result of accidental impact, the train shield may become damaged or fall off. If the train shield is broken or missing, it will allow grass to come out from the mower deck, which poses a safety risk. Check to see if grass is being expelled from the motor deck.Installing a train shield on a lawn mower is an easy task. There is hardware required to secure the part in place. Wear gloves for protection. Make sure the machine is entirely cool.This train shield is a genuine OEM replacement part. It is sourced from the manufacturer. The train shield is made of durable, high-quality plastic. It is sold individually. The train shield can be installed on MTD, Troy-Bilt, Yard-Man, Bolens, Yard Machines, Cub Cadet, and Huskee brand lawn equipment. It is compatible with several models of walk-behind lawn mowers.

This is a replacement mulch plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached mulch plug on various lawnmower models.Mulch plugs are essential to stopping the mower from discharging grass clippings in order to mulch them. Without the mulch plug, grass clippings will be cleared from the lawnmower before becoming mulch. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. Proper tools are required to replace this part and work gloves are advised. For more accurate information on how and where to install this mulch plug, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this mulch plug is suitable for use on several different lawn mower models manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This replacement part is a discharge chute intended for use in lawn equipment. This is a genuine replacement part made by MTD. Discharge chutes are situated on either the sides or the rear of many lawn mowers. These chutes expel lawn debris as the grass is being cut. This ensures that the debris does not get in the way of the machine as the user continues working. A new discharge chute might be needed if the current one is damaged or broken in anyway, including being bent, dented, or cracked. It is common that this part be replaced after years of normal wear and tear. Be sure the machine is completely powered off and cooled down before replacing the discharge chute.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.