Mtd Pro Chipper Shredder Fastener

This is a genuine wing nut replacement designed for use in select walk-behind lawn mowers. Although some wing nuts are considered standard hardware on lawn mowers and other equipment, this specific wing nut connects to a bolt and secures the front baffle to the deck of the mower. Over time, this plastic wing nut can crack, fall off, or the threads may become damaged. This will result in the mover assembly being affected and the unit may not be able to be used until the nut has been properly replaced. This genuine replacement part will provide the exact fit for compatible mowers. This genuine OEM wing nut is manufactured to exact standards and comes from MTD. It can be used with hundreds of walk-behind lawn mower models from the brand, as well as those from Cub Cadet, Ryobi, Troy-Bilt, Bolens, Yard Man, Yard Machines, and Huskee. This plastic wing nut is sold individually. The carriage bolt that it connects to will need to be purchased separately if that also needs to be replaced. No tools are required for this installation, as it can simply be hand-tightened into place. Wear gloves for hand protection when performing equipment repairs.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This is a replacement nut for use with bolts found on many types of lawn and garden machines. The purpose of the nut is to help fasten various parts together along with the bolt. The nut is a fastener with a threaded hole. The threads on the bolt connect with the threaded hole and provide a secure connection. A nut could need to be replaced if the threads have become stripped and it no longer fastens properly with the bolt. It would also need to be replaced if it has become lost. Replacing the nuts tends to be a fast and easy job. However, it will often depend on the location of the nuts in the machine. This is a genuine OEM replacement nut that is sold individually. Owners may want to buy several at once to have them available. The nut can be used on lawn mowers, snowblowers, tillers, log splitters, wood chippers, leaf blowers, and other small engines. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost screw in outdoor power equipment. Screws hold together components in the equipment and thus are essential. They will need to be replaced if lost, stripped, corroded, or otherwise unable to hold parts together securely. Screws are a standard piece of hardware that have many different uses. It's important when working on or near to any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, Cub Cadet, Husky, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in lawnmowers, snowblowers, and wood chippers. This part assists in fastening two components together by creating a slight gap that reduces friction.The spacer might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If the spacer is lost at some point within the typical operation of the appliance and its absence is noticed by the operator, the spacer should be replaced by this genuine OEM replacement part. If the spacer is damaged beyond functionality, the spacer should be immediately replaced. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spacer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Huskee, Yard Machines, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a lawn mower or a chipper shredder. The purpose of the clevis pin is to serve as a fastening component in a variety of other components within the internal machinery of the lawn mower or chipper shredder. It is a U-shaped component with holes on either end. It is a three-piece fastening system that is similar to a bolt.The clevis pin in a lawn mower or a chipper shredder might have to be replaced if it is lost, misplaced, or damaged. The clevis pin is a small component that can easily be lost or misplaced without noticing its absence unless it results in parts coming loose from one another. The clevis pin can also be stripped over time from general wear and tear. If any of this occurs, the clevis pin should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. This clevis pin is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Yard Machines, Yard Man, and MasterCut.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

This OEM part is a cotter pin for lawnmowers. The cotter pin is the small clip that secures the mower deck to the mower. A cotter pin can become rusted or damaged due to exposure to the elements. If the cotter pin is no longer securing the mower deck, then it will need to be replaced. Luckily replacing this part is a relatively simple fix.To replace the cotter pin, start by making sure the mower is turned off. After that, locate the old damaged pin. Use a pair of pliers to pull it out of its place. Once removed, slide the new pin into its opening and make sure it is set securely on the mower deck. Once secured, turn the mower on to see if the pin can hold the mower deck.This genuine replacement part is sold individually and is compatible with MTD brand mowers.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

This replacement part is a snap ring. This is a genuine replacement part made by MTD. This part acts as a fastener and is used to hold certain components within the machine together. This ensures that the appliance is working efficiently and smoothly during use. A new snap ring might be needed if the current one is visibly damaged or no longer able to stay attached. If the ring has become stripped over time, it might be best to replace it. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This washer is a genuine MTD part, sold individually. This washer can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and edgers. The purpose of a washer for such outdoor appliances is to provide separation and sealing between fastening components of the appliance so the fastening components are not damaged from friction.The washer is a small component that can be easily lost or misplaced. Additionally, it may become warped or damaged. If any of these things occur, this genuine OEM replacement part should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, and Troy-Bilt.