Mtd Pro Snow Removal Equipment Parts

This is a genuine OEM right-hand auger sourced directly from the manufacturer. It is designed for use on snowblowers and snow throwers. The augers on a snowblower are rotating blades responsible for accumulating snow and pushing it through the auger housing and into the chute to be dispersed. Over time and with repeated use, the auger may stop working correctly. If snow isn't coming out of the chute when used, the auger may be damaged and will not push the snow; when this happens, the auger should be replaced. The auger may be damaged due to hitting rocks and other debris while removing snow. Augers should be inspected regularly to check for broken or bent parts. A screwdriver and socket set is needed to remove and replace the auger. Snowblowers and snow throwers have a right, left, and sometimes middle auger. All augers should be inspected and replaced as needed. Wear gloves when changing the auger and make sure the machine has cooled down if recently used. This right-hand auger is made of metal with serrated edges; it is sold as an individual unit. This right-hand auger is compatible with snow blowers and snow throwers manufactured by Craftsman, Troy-Bilt, MTD, Yard Machines, Yard-Man, Cub Cadet, and Husky.

This is a carriage bolt, which is found on lawnmowers, snowblowers, and many other types of lawn and garden equipment. The carriage bolt is made of metal and the location will vary based on the model of the tool. The carriage bolt is used to fasten together two components on lawn and garden equipment. It can become damaged, break, or stripped and will need to be replaced.If the carriage bolt is broken, stripped, or has damage, a wrench will be needed to replace it. Make sure that the spark plug wire has been disconnected and the tool is turned off before you begin. Use the wrench to remove the carriage bolt before installing the new part in the same location. Replace any additional disassembled components removed to gain access to the bolt before using the tool.This carriage bolt is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The bolt is designed to work with lawnmowers, chainsaws, snowblowers, tillers, and leaf blowers manufactured by Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a genuine OEM replacement fuel bowl bolt for a snowblower, tiller, or chipper engine. The fuel bowl is a part of the fuel filtration system designed to prevent sediment from clogging up the carburetor. Fuel moves from the fuel tank and passes through the fuel bowl to catch any debris. It is essentially a particle filter. This bolt mounts the fuel bowl in place. The two most likely reasons why a fuel bowl bolt might need replacing are general wear and tear or loss. This bolt is located fairly close to the outside of the engine, making it more susceptible to the elements. Over time, the bolt may corrode and will need replacing. If lost while making a repair to the fuel bowl itself, the fuel bowl bolt will need to be replaced. Use a wrench to make the repair. This fuel bowl bolt is a top of the line replacement part for Bolens, Yard Machines, MTD, Troy-Bilt, Huskee, and Yard Man appliances. This part does not include any additional hardware, as it ships individually.

This carriage bolt is a genuine MTD part, sold individually. This carriage bolt can be used as a replacement part in lawnmowers, snowblowers, tillers, and edgers. The purpose of the carriage bolt for one of these outdoor appliances is to work in conjunction with a nut to affix two metal components to one another or one metal component to another wood component.The carriage bolt in an outdoor appliance might have to be completely replaced if it cannot affix two or more components together. This could occur if the carriage bolt has been punctured, dented, cracked, warped, or eroded to the point that it loses its functionality. If this occurs, the carriage bolt should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This carriage bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard-Man, and MasterCut.

This hex screw is a genuine MTD part. It is a replacement part for lawn tractors, edgers, lawn mowers, snow blowers, tillers, string trimmers, chainsaws, log splitters, and wood chippers. It is a standard-sized part and it may be compatible with other machines as well.This particular screw is a one-inch metal screw and may be found in various places on the pieces of equipment. Refer to a parts diagram to find out where it is used on the equipment.This hex screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Most machines have multiple screws; check others to see if more need replacement. It is compatible with several makes, including but not limited to Bolens, MTD, Troy-Bilt, Yard-Man, Yard Machines, Ryobi, Husky, Cub Cadet, Montgomery Ward, MasterCut, Turf King, and more.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part for a snowblower or a chainsaw. The function of a screw for a snowblower or a chainsaw is to affix two or more components to one another.The screw for a snowblower or a chainsaw is a small component which can become lost or stripped over time. If the screw is loosened to the point that the components it holds together are no longer kept affixed to one another, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This is a quality chute handle that is used on snowblowers. The purpose is to offer an easy place to hold on to so the operator can use the snowblower. This chute handle is made of durable plastic but wear and tear, regular use, or impact can cause it to become damaged or broken. If this happens, the handle will need to be replaced.No special tools are needed to replace the chute handle on the snowblower. A pair of work gloves can be used. Take the snowblower and place it on a sturdy surface before disconnecting the spark plug wire. The original chute handle can be pulled off of the machine to install the new one. The part will pop into place and the snowblower can again be used.The chute handle is made for use on snowblowers created by Craftsman, Huskee, MTD, Troy-Bilt, Yard Machines, and Yard-Man. This is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually.

Snowblowers require a chute adapter that directs the snow pulled into the machine up, out, and away. The chute adapter is adjustable and moves vertically to determine the height of the snow being expelled from the device. It attaches the auger housing to the lower chute. There may be issues that arise with the chute adapter with regular use or damage from ice. When snow is no longer coming out from the chute adapter, it could be clogged, or the adapted may require replacement. A damaged chute adapter will lower the snow thrower's effectiveness and increase the time and energy demanded for clearing snow.The chute adapter is easily installed with hardware not included with this piece. Existing nuts and bolts may be reused to attach this replacement chute. A socket set and wrench set are required for assembly. Wear gloves for safety when replacing the adapter.This OEM authentic replacement part is a chute adapter compatible with several different types of snow blowers. It can be installed on brands including MTD, Yard Machines, Yard-Man, Troy-Bilt, Cub Cadet, and Husky. The chute is made from rugged black plastic. It is sold individually and includes the chute only.

This is a belt cover that is used in many models of lawnmowers. The belt cover is attached right above the blade and is responsible for ensuring that debris and dirt don't manage to get into the crankshaft pulley or the drive belt. This part is made of plastic and can become damaged or broken. When this occurs, there is nothing to stop debris from entering the lawn equipment. This can cause additional damage to the lawnmower so the belt cover should be replaced as soon as possible.Replacing the belt cover is a simple process that takes only a few minutes. It may require the use of a screwdriver, nut driver, and other basic tools. Before starting the replacement, make sure the lawnmower is turned off, the spark plug wire has been disconnected, and the mower is on a stable surface. If the cover is still intact, unscrew it from the machine. Replace using the new component.This belt cover is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold on an individual basis. The component is made for use on lawnmowers manufactured by MTD and other companies.