Parts for Lg WD100CB/00: Outer Case Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This display power control board assembly powers and controls the appliance display and front-panel functions so the console lights and buttons respond correctly. It replaces a failed display module to restore visible status and user input. What it does

• Supplies power to the front display and regulates the panel's illumination
• Interfaces with the control electronics so touch or button inputs register
• Common symptom: display is blank or the panel backlight is out
• Common symptom: front-panel buttons or touch controls are unresponsive

• One display power control board assembly

• Disconnect power before starting; avoid electrical shock or damage to electronics
• Handle the board by its edges and avoid static discharge
• Retain and reuse any factory screws or brackets; verify connector orientation before reassembly

This roller assembly supports the dryer drum and lets it turn smoothly, reducing friction and wear for quieter, more reliable operation. It replaces a worn or noisy drum support to restore proper drum rotation. What it does:

• Supports the dryer drum on the rear/under side to maintain alignment during rotation
• Reduces squeaks, grinding noises, and metal-on-metal contact caused by worn rollers
• Helps prevent drum wobble, uneven wear, and rubbing that can cause poor drying
• Works as part of the drum support system with the shaft and mounting bracket

• Disconnect power before starting service to avoid electrical shock
• Access typically requires removing the dryer rear panel or front bulkhead; follow your model's service manual
• Inspect the shaft, mounting bracket, and adjacent rollers and replace any damaged components to prevent repeat failure
• Use proper tools and moderate force

This power cord assembly supplies mains power to the appliance, replacing a damaged or worn cord to restore safe electrical connection. It provides the appliance's primary power connection for normal operation. What it does:

• Carries household mains voltage to the appliance so it can power on and run
• Replaces frayed, cut, or heat-damaged cords that can cause intermittent power or arcing
• Restores a secure connection if the original cord or strain relief is damaged
• Helps prevent electrical hazards from exposed wires or loose connections

• One power cord assembly as shown

• Always disconnect the appliance from power before replacing the cord
• Inspect the terminal block and strain relief; install the cord with the same routing and secure the strain relief
• Ensure wire connections are tight and the grounding conductor is connected per local electrical code

This leveling leg assembly supports and stabilizes the appliance cabinet. It threads into the base to help level the unit on uneven floors, reducing vibration and movement for quieter, steadier operation.

• Provides height adjustment to level the appliance
• Helps reduce excessive vibration, walking, and rattling
• Supports proper door alignment and smooth operation
• Common fix when the unit rocks or is difficult to level

• Unplug the appliance and shut off water/gas before service
• Carefully tip or access the base to reach the leg location
• Thread the new leg by hand; adjust height with a wrench as needed
• The cabinet is level front-to-back and side-to-side

This leg support secures the adjustable leveling foot to the appliance's base. Replacing a damaged or stripped support restores a solid mounting point so you can properly level the unit and reduce rocking and vibration. What it does

• Provides the mounting point for the leveling leg; anchors to the base/frame
• Helps keep the appliance level and stable during operation
• Replace if cracked, bent, or the threads are stripped
• Common symptoms: rocking or unstable unit, excessive vibration/rattling, doors out of alignment, leveling foot won't hold adjustment

• 1 leg support

• Disconnect power; shut off water or gas supply if applicable
• With a helper, carefully tip and support the unit to access the base safely
• Remove fasteners, transfer or thread the existing leveling leg into the new support, and reinstall
• Set the appliance down and level it on all corners; verify stability

This Supporter, Leg is the base bracket that holds the leveling foot at the cabinet. It stabilizes the unit and enables precise leveling to help prevent rocking, vibration, and door or drawer misalignment during everyday use.

• Supports and locates the leveling leg/foot at the base of the cabinet
• Provides a secure mounting point for height adjustment and stability
• Helps keep the cabinet square and reduces wobble and vibration
• Common symptoms of a failed support include rocking, difficulty leveling, or a visibly cracked/bent bracket

• Disconnect power and protect flooring before moving or tilting the appliance
• Access the base area (remove the toe grille/kick panel if equipped)
• Unload the leg, remove mounting fasteners, and transfer the leveling foot to the new support if needed
• Reassemble and verify the unit is level front-to-back and side-to-side

This small structural bracket supports the "leg" of an interior shelf or drawer assembly in compatible refrigerators. It helps keep shelves level and stable so bins slide smoothly and contents stay secure during everyday use. What it does:

• Supports the corner/leg of an interior shelf, cover, or drawer rail
• Helps maintain level alignment and prevents wobble or sagging
• Restores stability if the original piece is cracked, warped, or missing
• Common symptoms: shelf or drawer sags, binds, or rattles; poor fit/alignment

• 1 supporter leg

• Disconnect power and remove food from the affected area before starting
• Remove the shelf/drawer and note fastener locations or locking tabs
• Transfer any reusable screws/clips and seat the new supporter fully
• Reinstall components, ensuring the shelf/drawer sits level and moves freely

This replacement switch assembly restores a failed control switch so the appliance's push-button or rocker inputs respond reliably. Fits where the original electrical switch no longer completes the control circuit. What it does

• Completes the electrical circuit when a control button or rocker is pressed
• Restores responsive control input for the affected function
• Can stop intermittent or no-response behavior from worn or broken switches
• Helps resolve control-related failures caused by damaged switch contacts

• Disconnect power (unplug or shut off breaker) before starting any work
• Note and/or photograph wiring and connector locations before disconnecting
• Reconnect wiring securely; ensure harnesses are routed to avoid pinching
• Test the control function after restoring power; do not operate if wiring appears damaged

This is a replacement power push-button switch used to turn the appliance on and off. It restores a tactile, visible control so you can reliably power the unit without replacing the whole control panel. What it does:

• Provides a user-facing push-button to send the on/off signal to the control board
• Replaces worn, broken, or non-responsive power button that prevents powering the appliance
• Restores proper button travel and tactile feedback for normal operation
• Fits into the front control panel and interfaces with the original switch mechanism

• Disconnect power before starting any repair to avoid electrical shock
• Access may require removing the control panel; retain screws and fasteners for reassembly
• Seat the button into the panel and engage the underlying switch mechanism
• If the appliance still will not power on after replacement, test the console and wiring before replacing additional parts

This top cover is a direct-replacement cabinet panel that restores the appliance's exterior finish and protects internal components from dust and damage. It helps maintain a safe, finished appearance and prevents debris from entering the chassis. What it does:

• Covers and protects internal components located at the appliance top
• Restores a smooth, finished exterior surface after damage or corrosion
• Eliminates gaps that can collect dust, lint, or liquids
• Helps prevent sharp edges and reduces risk of contact with internal parts

• One replacement top cover

• Disconnect power (and water, if applicable) before beginning work
• Remove trim or access panels as needed to reach mounting screws
• Support the cabinet while removing/installing the cover to avoid dropping or bending

This water inlet cover protects and secures the refrigerator's water inlet assembly, helping keep the fill valve and tubing in place and reducing the risk of accidental damage. It restores the OEM fit and prevents exposure of inlet components. What it does:

• Shields the water inlet valve and connections from dirt and physical contact
• Helps hold the inlet tubing or hose in the correct position to avoid kinks
• Prevents gaps that can allow drips or moisture build-up around the inlet area
• Useful when a cracked, broken, or missing cover exposes the inlet

• Turn off water supply and unplug appliance before starting work
• Remove any access panels before removing the old cover; keep track of screws/clips
• Align the cover with the inlet assembly and snap or fasten into place; avoid forcing brittle plastic
• Inspect inlet tubing and valve while panel is off; restore power and water, then check for leaks

This Top Cover is the upper cabinet panel that protects and finishes the top of the appliance, restoring a clean appearance and shielding internal components from dust and debris. It fits where the control console meets the lid or door area. What it does

• Covers and protects internal components at the top of the appliance from dust, moisture and accidental contact
• Restores the appliance's finished appearance and hides mounting hardware or wiring
• Helps reduce air drafts and limits debris ingress around the control area
• Supports proper alignment of the control console and adjacent trim when installed

• One Top Cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove any control console, trim, or fasteners as required to access and replace the top cover
• Handle edges carefully; wear gloves to avoid cuts and protect finished surfaces from scratches
• Reinstall all fasteners and test functions after reassembly

This drain pump assembly replaces a failed washer drain pump to restore normal water removal. It helps clear standing water so cycles can finish and reduces leaks or overheating risks from trapped water. What it does:

• Pumps water from the tub to the household drain during drain/spin cycles.
• Common failure signs: washer won't drain, water left in tub after cycle, or cycle stalls.
• A leaking pump can allow water to escape under the machine or trigger error codes.

• Disconnect power and shut off water before starting any repair.
• Drain remaining water from the tub and disconnect hoses carefully to avoid spills.
• Match and reconnect electrical connectors exactly; secure hose clamps and check for leaks.
• After installation, run a short drain/spin cycle and inspect for proper operation and leaks.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This inlet valve assembly controls water flow into the appliance so it fills only when needed and helps prevent unwanted leaks. It replaces a worn or failed inlet valve to restore normal fill operation. What it does:

• Opens and closes to allow water into the unit during fill cycles
• Stops water flow when fill is complete to prevent overfilling
• Common symptom: no water or slow/no fill
• Common symptom: continuous filling or overflow risk
• Common symptom: water leaking from valve area

• Disconnect electrical power and shut off the water supply before starting
• Drain remaining water from hoses and lines to avoid spills
• Replace with the exact part number and secure all fittings; use hand tools and avoid overtightening

This bellows is the flexible rubber door boot seal that creates a watertight barrier between the washer door and tub, helping prevent leaks and keeping laundry contained during cycles. What it does:

• Seals the front-load door opening to stop water from escaping during wash and spin cycles
• Helps prevent leaks that can cause water on the floor or under the machine
• Keeps lint, soil and moisture inside the drum, reducing musty smells
• Restores a damaged, torn or hardened boot to proper sealing performance

• One bellows

• Disconnect power and water supply before starting any repair
• Drain remaining water from the tub to avoid spills when removing the old boot
• Removing the door trim and spring clamp may be required; keep track of all fasteners

This lid assembly replaces a worn or damaged top cover on compatible top-load washers, restoring safe closure and a finished appearance. It lets the washer door close properly so cycles can start and helps prevent debris from entering the tub. What it does:

• Replaces a cracked, warped, or missing top lid so the washer closes securely
• Supports the lid latch/switch area so the machine recognizes when the lid is shut
• Restores a tight seal around the top opening to reduce stray water and debris
• Improves appearance by replacing a faded or damaged top cover

• Disconnect power before installing to avoid shock or accidental operation
• Handle edges carefully; use gloves to avoid cuts on metal or broken plastic
• Align hinge pins and latch mechanism, then secure fasteners; basic hand tools required
• Test lid closure and start a short cycle to ensure proper operation of the lid switch

This tub cover assembly replaces the inner cover that surrounds the washer tub, restoring proper sealing and alignment so clothes move freely and the wash action stays consistent. What it does:

• Covers and protects the tub interior, helping keep clothes clear of internal components
• Helps maintain proper drum alignment and reduces rubbing or catching of items
• Restores the tub enclosure when the existing cover is cracked, warped, or broken
• Can reduce abnormal noise caused by a damaged cover contacting the drum

• Disconnect power and water supply before starting any repair
• Installation generally requires partial disassembly of the washer cabinet and removal of the outer tub or drum assembly
• Handle edges carefully—parts and cabinet openings can be sharp
• Use OEM fasteners and follow manufacturer instructions for proper reassembly

The Motor Rotor Bolt is an OEM part for LG washing machines. It secures the rotor to the motor shaft, playing a crucial role in the efficient functioning of the motor and ensuring the washer drum spins correctly during wash cycles.

Causes of a bad motor rotor bolt can include wear and tear from prolonged use, corrosion due to exposure to moisture, or damage from over-tightening or accidental impacts. A faulty motor rotor bolt can compromise the stability of the motor, leading to various operational issues.

Symptoms of a bad motor rotor bolt include:

• The washer drum not spinning or spinning irregularly
• Unusual noises during operation, such as banging or clunking
• The washer failing to complete cycles or stopping mid-cycle
• Visible wear or damage to the bolt or surrounding components

This OEM LG part is also compatible with Sears/Kenmore models.

This accessory assembly is a factory replacement component that restores the original mounting/connection function in compatible LG appliances, helping eliminate loose fittings and restore secure operation. What it does

• Replaces a worn or damaged accessory assembly that secures or connects appliance components.
• Restores proper alignment and engagement of the affected assembly to reduce rattling or movement.
• Can help address symptoms such as loose parts, intermittent connection issues, or unusual noises originating near the assembly.
• Matches OEM fit and form to maintain original performance when installed correctly.

• Disconnect power (unplug or shut off breaker) before beginning any repair.
• Basic hand tools are typically required; follow the appliance service manual for removal and installation steps.
• Inspect surrounding components for wear or damage while replacing this assembly.

This accessory assembly is a replacement service kit that restores the accessory components needed for proper appliance operation, helping return the affected feature to normal function. Ideal for repairs where the original accessory is missing or damaged. What it does:

• Replaces worn, broken, or missing accessory components used by the appliance
• Restores accessory-related functions so the appliance can operate as intended
• Addresses symptoms such as non-functioning accessory features, loose or missing parts, or intermittent accessory-related operation
• Works as the service replacement specified for affected appliance assemblies

• One accessory assembly as listed

• Disconnect power and water before starting any repair
• Basic hand tools are typically required; refer to the service manual for specific fasteners
• Handle small components carefully to avoid loss or damage during installation

This single wire harness routes power and signals between appliance components to restore reliable electrical connections and proper operation. It replaces damaged or frayed wiring assemblies to help eliminate intermittent faults. What it does:

• Provides factory-style wiring and connector plug alignment for correct component connections
• Restores power/signal continuity when a worn harness causes intermittent operation or no power
• Helps eliminate loose or broken wire symptoms such as control failures, lights or motors not working, or erratic cycles
• Maintains routing and strain relief to prevent chafing and short circuits during normal use

• One single wire harness as shown

• Always disconnect the appliance from power (and water, if applicable) before starting work
• Compare the new harness to the old part to confirm connector types and routing before installing
• Route wires along existing clips and channels; secure connectors firmly but do not force into place

This part is a hinge. This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective hinge on multiple different models of LG washers and dryers. This part is made for use with LG appliances and may not correctly fit appliances manufactured by other brands. This hinge is for attaching the lid of the washer or dryer to the appliance, allowing it to open and close smoothly. If the lid will not open properly, the hinge may need to be replaced. Please follow appropriate safety precautions when attempting to replace any appliance parts. Ensure the washer or dryer is fully disconnected from its power source before attempting this repair. For more accurate information on how and where to install this replacement hinge, the manufacturer owner's manual and diagrams should be referenced.As an authentic replacement part, this hinge is suitable for use on several different models of washers and dryers manufactured by LG. Please note that this is a genuine part made of high-quality, durable plastic and is sold individually.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.