Parts for Electrolux EI24MO45IBC: 02 - Oven, Cabinet Parts

If your microwave won't heat or makes humming noises, the capacitor may have failed. This component stores electrical charge for the magnetron.

Microwave not heating or making humming noise? This power unit supplies high voltage to the magnetron. Moderate difficulty repair requiring electrical safety.

This interior refrigerator lamp provides reliable lighting inside the fresh-food compartment so you can see contents clearly. It replaces a dim or non-working lamp to restore normal interior illumination. What it does:

• Provides interior lighting

This drive motor restores rotational power to the appliance's drum or agitator so loads spin and drain correctly. It's a direct-replacement motor designed to restore normal wash and spin cycles when the original motor fails. What it does:

• Provid

Microwave won't start or keeps running with door open? This door switch detects when the door closes, ensuring safe operation and proper functionality.

The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on doo

Microwave won't heat but runs normally? This thermal fuse protects against overheating by cutting power when temperatures spike. Simple DIY fix.

Microwave not heating or making loud buzzing noise? The magnetron converts electricity into microwave energy. Common DIY repair, typically done in 30 minutes.

This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.

• Converts electrical energy into steady shaft rotation to

Fix a microwave with no display or unresponsive controls. This control transformer restores low-voltage power to the electronic console when the original fails.

Fixes inaccurate oven temperatures and uneven cooking. This sensor monitors heat levels and signals the control board to adjust. Easy 15-minute repair.

This outer cabinet provides the refrigerator's main exterior housing, restoring structural support and the appliance's finished appearance. Replaces a damaged or dented outer shell to help maintain proper component alignment and fit. What it does:

<

Holder component for microwave ovens. Secures internal parts in position. Replace if cracked, broken, or missing to restore proper mounting support.

Microwave mounting bracket secures your appliance to the cabinet or wall. Replace if cracked, bent, or missing to ensure safe, stable installation.

Fix a microwave that won't start or stops mid-cycle with a new door latch hook. Secures the door closed so safety switches engage properly.

Microwave door won't open when you press the button? This door release lever connects the button to the latch mechanism. DIY fix in 30 minutes.

This duct-magnetron (waveguide duct) directs microwave energy from the magnetron into the oven cavity and helps protect internal components. Replacing a damaged duct restores proper wave guidance and prevents arcing or burn damage. What it does:

Protects the magnetron antenna opening inside your microwave cavity. Replace if cracked, burned, or has food buildup to prevent arcing and sparking.

Replace your worn or missing microwave door bushing. This small plastic component helps the door hinge operate smoothly and maintain proper alignment.

This replacement appliance information label restores a readable factory data sticker so model, serial and safety/service details remain accessible for identification and repairs. It helps technicians and owners when the original label is missing or damaged. What it does

• Replaces a worn, torn or peeling factory data sticker so identification and service information is legible
• Provides the appliance's key rating, model/serial and safety/service references as printed by the manufacturer
• Helps avoid misidentification during repairs or parts ordering when the original label is unreadable
• Adhesive-backed for direct application to the cabinet or interior surface where the original label was located

• One appliance information label

• Clean and dry the surface thoroughly before applying; remove any adhesive residue for best adhesion
• Align the label carefully and press firmly from the center outward to remove air bubbles
• Do not apply to surfaces that exceed normal operating temperatures or to non-compatible plastics without confirming adhesion

Secures microwave components to cabinet or frame. Replace when bracket is broken, cracked, or worn causing misalignment or excess vibration during operation.

The Turntable Tray is an OEM part for Frigidaire microwaves. It sits inside the microwave and rotates food to ensure even cooking and heating. Made of durable glass, this tray is designed to withstand high temperatures and the repetitive motion of the

This replacement identification label restores factory markings and safety/operating information on the appliance. It helps maintain readable instructions and regulatory info that have worn, peeled, or become unreadable. What it does:

• Replaces faded, torn, or missing identification and specification markings
• Restores safety warnings and operating instructions printed on the original label
• Helps service technicians and owners read model/serial and other printed information
• Prevents confusion from illegible markings and keeps appliance identification compliant

• One replacement identification label

• Clean and dry the mounting surface thoroughly before applying
• Peel backing and press label firmly in place to ensure full adhesion
• Avoid stretching or creasing the label during installation
• Remove adhesive residue from the old label with a mild cleaner and allow surface to dry

This is a replacement information label used to display model, serial, wiring, and safety information on the appliance. It restores legible identification and safety markings so service and ownership details remain visible. What it does:

• Provides appliance identification and manufacturer information for service and records
• Displays safety warnings and basic operating or wiring notes as printed on the original
• Restores a worn, torn, or missing decal so important information is readable

• Clean and dry the mounting surface before applying for best adhesion
• Align carefully; labels are typically adhesive-backed and are not reusable once removed
• If servicing electrical components nearby, disconnect power before beginning work
• For exact placement, match the new label to the original location on the appliance

Replacement mounting screw that secures panels, trim, and internal components in microwaves and wall ovens. Needed when screws are stripped, missing, or lost.

Mounting screw for microwave and wall oven assemblies. Replace if lost, stripped, or damaged during installation or service. Secures components.

This replacement identification decal restores legible equipment labeling so model, rating and safety information are visible for service and ownership. It helps replace faded, torn or peeling labels to improve readability and compliance. What it does:

• Provides a clear, adhesive identification decal with printed model/rating/safety information
• Replaces faded, torn or peeling factory labels that are hard to read
• Helps owners identify the appliance correctly during service
• Maintains visible safety and rating information required for repair or inspection

• Clean and dry the installation surface thoroughly before applying
• Peel backing and press decal firmly, smoothing out air bubbles for full adhesion
• Do not stretch, reposition repeatedly, or apply to wet/oily surfaces
• If label covers a vent or operational opening, confirm placement with service manual

This motor capacitor helps start and run appliance electric motors by providing the brief boost of power the motor needs to reach operating speed. Replaces a failed capacitor to restore normal motor starting and performance. What it does:

• Provid

Microwave not heating? The capacitor rectifier converts AC to DC power for the magnetron. Moderate repair requiring panel removal and basic tools.

Mounting screw for microwave panels, trim, and brackets. Replaces lost or damaged fasteners to restore secure alignment and eliminate rattles or loose components.