Parts for Ge ZGP486LDR1SS: 07 - Oven Cavity Parts

A complete oven rack and guide kit that restores proper rack support and smooth sliding in compatible 48" and 36" ovens. Replaces worn, bent or broken racks and roller/guide assemblies to improve rack stability and function. What it does:

• Provides a full replacement rack plus guide hardware to support cookware and prevent sagging
• Restores smooth, even rack movement when sliding food in and out of the oven
• Replaces bent, warped or damaged rack or guide components that cause sticking or uneven travel
• Helps maintain correct oven clearance and safe placement of cookware while cooking

• Always disconnect power to the oven and allow it to cool before installing parts
• Installation uses basic hand tools; keep fasteners and hardware in a safe place during replacement
• Inspect oven cavity and mounting points for damage and replace any additional worn hardware as needed
• Follow the appliance manufacturer's instructions for correct placement and testing after installation

This complete oven rack and guide kit restores a single 12-inch oven rack assembly so the rack stays level and slides smoothly. Ideal when a rack or its guide rails are bent, worn, or binding. What it does:

• Replaces a damaged or warped oven rack and its guide rails to restore stable cooking surface support
• Helps the rack slide in and out smoothly, reducing binding and catching
• Prevents sagging that can cause uneven baking or difficulty placing/removing cookware
• Fits in ovens that use a 12-inch rack assembly design

• One complete oven rack and guide kit

• Disconnect power to the range and ensure the oven is fully cool before starting
• Remove oven door if needed for easier access, following the oven manufacturer's instructions
• Basic hand tools may be required; handle the rack edges carefully to avoid cuts

This complete oven rack and guide kit restores a single 12-inch oven rack assembly so the rack stays level and slides smoothly. Ideal when a rack or its guide rails are bent, worn, or binding. What it does:

• Replaces a damaged or warped oven rack and its guide rails to restore stable cooking surface support
• Helps the rack slide in and out smoothly, reducing binding and catching
• Prevents sagging that can cause uneven baking or difficulty placing/removing cookware
• Fits in ovens that use a 12-inch rack assembly design

• One complete oven rack and guide kit

• Disconnect power to the range and ensure the oven is fully cool before starting
• Remove oven door if needed for easier access, following the oven manufacturer's instructions
• Basic hand tools may be required; handle the rack edges carefully to avoid cuts

This is a replacement igniter glowbar. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace defective or burnt-out igniter glowbars in a variety of gas powered oven and stove models. A glowbar igniter works to electrically ignite the gas source on a stove or range. A defective glowbar will prevent the burner from lighting and emitting a flame. Always make sure that the stove is entirely disconnected from power and gas before starting any repair work. Proper tools are required to replace this part. Please ensure the appropriate safety precautions are followed when attempting to fix any appliances. For more accurate information on how and where to install this igniter glowbar, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this igniter glowbar is suitable for use on several different models of gas-powered ovens, stoves, and ranges manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable materials and is sold individually.

The Igniter Glowbar is an OEM part for GE ovens. This component is essential for igniting the gas in the oven burner, producing the heat required for cooking and baking. The glowbar heats up to a high temperature, igniting the gas and ensuring efficient and reliable oven operation.

Causes of a bad igniter glowbar can include wear and tear from regular use, electrical faults, or damage from high temperatures over time. A worn or damaged igniter may fail to reach the necessary temperature to ignite the gas.

Symptoms of a bad igniter glowbar include:

• The oven not heating up
• Delayed ignition or the oven taking longer to preheat
• A weak or no glow from the igniter
• The smell of gas without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.  

Symptoms of a bad temperature sensor include:

• Inability to reach or maintain set cooking temperatures
• Fluctuating temperatures causing inconsistent results  
• Error codes or fault messages related to temperature regulation
• Potential safety concerns if temperatures run too high or low

Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.

This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models. 

Probe thermistor (temperature sensor) gives the refrigerator control board accurate internal temperature readings so it can regulate compressor and defrost cycles. Replacing a bad thermistor helps restore steady cooling and correct temperatures. What it does:

• Senses interior temperature and sends the signal to the control board so cooling and defrost cycles operate correctly.
• Fails can cause uneven temperatures, items being too warm or too cold, or intermittent cooling.
• Often used in fresh food and freezer compartments as part of temperature control and defrost systems.
• Electrical symptoms may include inconsistent cycling or the fridge running more than expected.

• Disconnect power before servicing to avoid electrical shock.
• Handle the sensor tip and wiring gently; avoid kinking or crushing the probe or leads.
• Basic hand tools are usually required; check the appliance service manual for access and routing.
• After installation, restore power and confirm correct operation.