Parts for Dacor RO230B: Oven Cell Parts

This bake element is the oven's lower heating element that produces the radiant heat used during baking and roasting. It restores proper oven heat so food cooks more evenly and reaches set temperatures. What it does:

• Heats the oven cavity from the bottom for baking and roasting cycles
• Replaces a burned-out, visibly broken, or non-heating lower element
• Helps correct uneven cooking, long preheat times, or failure to reach temperature
• Works with the oven's control and thermostat to maintain set temperature

• Disconnect power at the breaker or unplug the appliance before installing
• Allow the oven to cool completely and use gloves to avoid sharp edges
• Support the element while removing and fastening terminal connections to avoid damage

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This convection baffle directs hot air in the oven cavity for more even cooking and protects internal components from direct heat. Replacing a cracked or warped baffle restores proper airflow and helps reduce uneven baking. What it does:

• Redirects convection airflow to promote consistent oven temperature distribution
• Shields oven back components from direct heat
• Prevents rattling or vibration caused by a loose or broken baffle
• Helps correct symptoms like uneven baking, hot spots, or visible damage to the baffle

• One black convection baffle

• Disconnect power to the appliance and allow the oven to fully cool before servicing
• May require removal of oven panels or racks; basic hand tools are typically needed
• Handle part carefully to avoid damage; follow the appliance service manual for step-by-step instructions

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

This service receptacle hinge is the hinge assembly used to support and secure the appliance's service receptacle/panel, restoring a stable, properly aligned access panel. It replaces a worn or damaged hinge to help the panel open and close smoothly. What it does

• Provides pivot and support for the service receptacle or service access panel
• Keeps the panel aligned and securely attached to the appliance frame
• Prevents the panel from sagging, jamming, or falling when opened
• Common symptom: loose, wobbly, or detached service panel or difficult-to-open access

• One service receptacle hinge

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Typical install requires basic hand tools; support the panel while removing and installing the hinge
• Inspect mounting screws and nearby components for wear and replace if damaged

This service kit replaces the convection fan used to circulate hot air for more even baking and roasting in compatible ovens. Restores convection performance and helps eliminate uneven cooking or reduced airflow. What it does:

• Replaces the convection fan assembly that moves hot air around the oven cavity
• Helps correct uneven baking or roasting caused by a failed or noisy fan
• Reduces unusual fan noise when the original fan motor or blade is worn
• Restores convection function so recipes relying on fan-assisted cooking perform properly

• Disconnect power and allow the oven to cool before attempting any service
• Handle sharp sheet-metal edges and the fan blades with care
• Follow manufacturer instructions for installation
• Verify fit and function after replacement before normal use

This convection fan blade kit replaces a damaged or worn fan blade in a convection oven to restore air circulation for more even cooking and efficient heat distribution. Designed as a direct-fit service kit. What it does:

• Circulates hot air in the oven cavity to support even baking and roasting
• Replaces cracked, bent, or missing fan blades that can reduce convection performance
• Helps reduce overheating or cold spots that cause uneven cooking
• Can resolve fan-related noises caused by damaged blades

• One convection fan blade kit

• Disconnect power to the appliance before beginning any service
• Allow the oven to cool completely; use proper protective gloves for sharp edges
• Installation generally requires basic hand tools and removal of the rear or rear interior panel

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

The Sewing Machine Meat Probe Socket is a vital component for your Samsung mechanical sewing machine. This genuine OEM part ensures a precise fit and reliable performance, maintaining the integrity of your sewing equipment. Designed specifically for Samsung models, it seamlessly integrates with your machine, providing stable connections for the meat probe system. The Sewing Machine Meat Probe Socket enhances the accuracy and efficiency of your sewing tasks, allowing for smooth and consistent operation. Made from durable materials, this part withstands regular use, ensuring long-lasting functionality and reducing the need for frequent replacements. Installing this genuine OEM part is straightforward, helping you quickly restore your sewing machine to optimal condition. Whether you are repairing a worn-out socket or upgrading your machine, the Sewing Machine Meat Probe Socket offers dependable quality and performance. Choosing this genuine OEM part guarantees compatibility and peace of mind, so you can focus on your creative projects without interruption. Enhance your sewing experience with this essential, customer-focused component.

This convection fan is the replacement blower used in Samsung service washer/dryer convection systems to move air for drying and temperature circulation, restoring proper airflow for more even drying performance. What it does

• Circulates hot air through the convection/drying chamber to aid moisture removal and even heat distribution
• Helps maintain designed airflow so cycles reach intended temperatures and dry times
• Failing or noisy fan can cause reduced drying performance, longer cycles, or unusual noises
• Replacing a worn fan can stop rattling, scraping, or vibration caused by damaged blades or bearings

• One convection fan assembly

• Disconnect power before servicing; this part is installed behind access panels and may require basic hand tools
• Handle fan blades carefully to avoid damage; confirm alignment and secure mounting for proper operation
• If replacing due to noise, inspect surrounding shrouds and mounting hardware for wear or debris

The SVC #8 x 3/8 Torx Screw for Walk-Behind Lawn Mowers is an essential component for maintaining the integrity of your mower. Designed specifically for walk-behind models, this genuine OEM part ensures a perfect fit and reliable performance. The #8 x 3/8 size with a Torx head provides secure fastening, preventing loosening during operation and enhancing the overall stability of your lawn mower. Crafted with high-quality materials, this screw offers durability and resistance to wear, making it ideal for frequent use in various outdoor conditions. Installing the SVC #8 x 3/8 Torx Screw is straightforward, allowing you to quickly replace any missing or damaged screws and restore your mower's functionality without hassle. By choosing this genuine OEM part, you can trust in the compatibility and longevity it brings to your Samsung walk-behind lawn mower. Keep your equipment running smoothly and efficiently with this reliable screw, tailored to meet the demands of your gardening tasks.

This meat probe socket is the oven probe jack that accepts the temperature probe plug, restoring the oven's ability to read food temperature and complete probe-based cooking cycles. It helps return proper probe connection and temperature sensing. What it does:

• Provides the electrical connection point for the oven's meat/temperature probe
• Allows the oven control to detect and monitor probe temperature during cooking
• Replaces a worn, loose, or damaged socket that can cause intermittent probe detection
• Can resolve probe-related errors or failures to register probe temperature

• Disconnect power to the range or oven before beginning any repair
• Handle wiring and connectors carefully; ensure correct orientation when installing
• Reconnect power and test probe detection and oven functions after installation