Parts for Thermador CIT304GM-01: Panel Assy Parts

This part is a coooktop operating module. It is sometimes called a cooktop user interface board. The function of this part is to send electronic signals to the burners after the user has selected the temperature or cooking time. Do a visual inspection of the operating module to see if there are any burn spots, broken wires, or burned wires. Allow the appliance time to cool down prior to attempting to access and replace this part. Be sure to unplug the cooktop prior to attempting to replace this part.This component is sourced straight from the manufacturer and is a genuine OEM part. It is sold individually. The operating module is compatible with cooktops that are manufactured by Bosch and Thermador.

This rubber sealing replaces a worn or damaged gasket to restore a watertight seal and help prevent leaks and water damage. It's a direct-fit part designed to keep fluids contained and appliances operating reliably. What it does:

• Forms a continuous, flexible seal to prevent water or air from escaping
• Helps stop leaking, dripping, or pooling around the appliance opening
• Reduces the risk of moisture-related damage and staining
• Contributes to consistent operation by maintaining proper enclosure integrity

• One rubber sealing

• Clean mating surfaces and remove old gasket material before installing the new seal
• Avoid sharp tools that can nick or cut the new sealing during installation
• Disconnect power and water supply before beginning work

This NTC temperature sensor measures internal temperature and helps the appliance regulate heat or cooling for reliable performance. It replaces a failed thermistor to restore accurate temperature sensing. What it does:

• Senses air or fluid temperature so the control can maintain proper operating temperatures
• Can cause temperature-related error codes or poor temperature control when faulty
• Commonly replaced when the appliance is not reaching or holding set temperatures
• Works with the control board to provide a varying resistance signal as temperature changes

• One NTC temperature sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring harness carefully to avoid damage
• Mount the sensor in the same location and orientation as the original for correct readings

This NTC temperature sensor measures internal temperature and helps the appliance regulate heat or cooling for reliable performance. It replaces a failed thermistor to restore accurate temperature sensing. What it does:

• Senses air or fluid temperature so the control can maintain proper operating temperatures
• Can cause temperature-related error codes or poor temperature control when faulty
• Commonly replaced when the appliance is not reaching or holding set temperatures
• Works with the control board to provide a varying resistance signal as temperature changes

• One NTC temperature sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring harness carefully to avoid damage
• Mount the sensor in the same location and orientation as the original for correct readings

This fixing kit is replacement mounting hardware designed to secure appliance panels and trim for a tight, stable fit. Restores proper attachment to reduce rattling and loose or sagging parts for safer operation. What it does:

• Provides replacement screws, clips, and/or brackets used to fasten panels and trim
• Secures loose or vibrating panels to reduce noise and improve fit
• Replaces broken or missing fasteners that allow parts to shift or sag
• Helps restore proper alignment of exterior components after repair

• Disconnect power to the appliance before beginning any work
• Use the correct screwdrivers and hand tools to avoid damaging trim or finishes
• Handle metal edges and clips carefully to avoid cuts
• Test fit after installation

Heat conducting paste that improves heat transfer between electronic components and metal mounting surfaces to help temperature sensors and controls respond more reliably. Use when servicing oven or appliance controls to restore proper thermal contact. What it does:

• Transfers heat from sensors, thermostats or control modules to metal surfaces for more consistent temperature sensing
• Helps reduce symptoms caused by poor thermal contact, such as erratic temperature readings or unstable cycling
• Fills tiny gaps and surface irregularities to improve conductive contact
• Intended for small, targeted applications during component replacement or service

• Disconnect power to the appliance before servicing to avoid shock or damage
• Clean mating surfaces thoroughly before application for best contact
• Apply a thin, even layer; avoid excess that could contact electrical connections
• Follow the appliance manufacturer's service instructions when available

The Sealing Strip is an OEM part for Bosch cooktops. This part creates a tight seal between the cooktop and the countertop. This sealing strip prevents spills and crumbs from entering the gap between the cooktop and the installation surface, which helps maintain the cleanliness and functionality of the kitchen workspace.

Causes of damage to the sealing strip can include prolonged exposure to heat and moisture, as well as physical impacts from cleaning or cooking activities. 

Symptoms of a bad Sealing Strip include:

• Visible gaps or looseness along the edges of the cooktop, which can allow food particles and liquids to seep through.
• Degradation or hardening of the seal material, which reduces its effectiveness and can lead to damage to the surrounding countertop.
• Accumulation of debris or moisture under the cooktop, potentially leading to mold or mildew issues.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.