Ge Microwave JNM7196RW1SS Parts

The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.

Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running. 

Symptoms of a bad Door Interlock Switch include:

• Microwave does not start
• Microwave stops unexpectedly
• The microwave operates with the door open
• Microwave turns on but does not heat food

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability. 

Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.

Symptoms of a bad halogen lamp include:

• Dark or splotchy lighting inside the microwave  
• Inability to fully view food as it cooks
• Difficulty determining if items are thoroughly heated
• Shadows create the potential for uneven cooking 

This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models. 

Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.

Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.

Microwave not heating? High voltage capacitor stores energy to power the magnetron. DIY repair typically takes 30-60 minutes with proper safety care.

The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.

• Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.

• Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Traps grease, smoke, and cooking residue to protect microwave interior surfaces. Replace when damaged or heavily stained. Verify fit with your model.

Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.

Charcoal filter removes smoke, fumes, and odors from microwave ventilation. Replace every 6-12 months for optimal performance. Confirm fit by model.

Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.

Microwave won't heat but runs? A faulty diode cable assembly prevents power conversion. DIYers report 10-minute fixes after diagnosing the issue.

Covers the upper front exhaust opening with louvered slots. Replace if cracked, loose, or missing to maintain proper ventilation and appearance.

Circular ring assembly that supports and rotates the glass turntable in your microwave. Replace if cracked, broken, or wheels are worn and damaged.

Rotating glass tray for even microwave cooking. Replace if cracked, chipped, or wobbling due to worn hub. Confirm fit with your exact model number.

The Installation Hardware kit is an OEM part for GE Built-In and Over-the-Range microwaves. It contains all mounting screws and brackets needed for installation into upper kitchen cabinetry. 

Symptoms of faulty or inadequate hardware include:

• Loosening or failure of the microwave mounting over time
• Difficulty leveling or properly securing the appliance
• Warping or damage to cabinet surfaces from faulty bracketry

Causes can be stripped screw holes, worn brackets, or omitted/lost original hardware disrupting a snug fit. Replacing with this hardware ensures safe support of weighty microwaves above cooktops.

Compatible with GE Profile, Hotpoint, and some Kenmore units, it facilitates installation or re-installation without frustration. 
 

The Door Key is an OEM part for GE microwaves. It is responsible for securely holding the microwave door closed during operation. A sturdy and reliable latching mechanism is important for safety and to prevent leaks of electromagnetic radiation.

Causes of a bad latch can include worn or damaged parts due to normal wear and tear over time. The mechanism undergoes a lot of opening and closing stress with repeated use. Impacts from improper handling can also damage latch components.

Symptoms of a bad latch include:

• The door not closing or latching securely
• Difficulty opening or closing the door
• The latch making loud noises or feeling loose

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.