Kenmore Range Hood 233.50303200 (23350303200, 233 50303200) Parts

This damper assembly helps control airflow by opening during operation and closing when the fan is off, reducing backdrafts and outside air intrusion. Replacing a worn damper restores proper ventilation and helps keep kitchen air moving the right way.

• Opens to let exhaust air out; closes to block drafts when the unit is off
• Can help address rattling, flapping, or poor airflow due to a stuck or broken damper
• Designed for compatible ventilation units that use this specific damper style

• Disconnect power before servicing
• Access damper at the duct connector or discharge outlet; note orientation of the flap
• Inspect and clear debris from the duct path before installing
• Verify smooth flap movement after installation and restore power to test

This light bulb restores dependable illumination in your ventilation appliance, improving visibility for cooking and cleaning. Replace a burned-out lamp to bring your range hood or fan back to normal lighting performance. What it does:

• Provides light for the cooktop or workspace under your hood/fan
• Replaces a failed, dim, or flickering bulb
• Helps maintain safe visibility during cooking and cleanup
• Direct replacement for the original lamp specified for the unit

• 1 light bulb

• Disconnect power at the breaker or unplug the unit before servicing
• Allow the existing bulb and lens/cover to cool completely
• Remove the lens/cover as directed in your model's instructions and install the new bulb without exceeding the wattage/voltage on the unit's rating label
• If your unit uses a halogen capsule, avoid touching the glass with bare hands; use gloves or a clean tissue

This light diffuser is the lens that covers your fixture's lamp, softening glare and protecting the light assembly. Replace a cracked, yellowed, or missing lens to restore clean, even illumination and a finished look.

• Diffuses light for even illumination and reduced glare
• Helps shield the bulb and socket from steam, moisture, and airborne debris
• Replace when the original lens is cracked, warped, yellowed, heat-damaged, or missing
• Common symptoms include dim or uneven lighting or a lens that won't stay secured

• Disconnect power at the breaker or unplug the unit; allow the lamp to cool completely
• Carefully remove the old diffuser; many designs slide out or unclip from the housing
• Align and seat the new lens fully; verify clearance around the bulb before restoring power
• Wear gloves to protect hands from sharp edges

This capacitor helps start and keep the blower/fan motor running smoothly in your range hood or ventilation unit. Replacing a weak or failed capacitor can restore proper fan performance and reduce humming or slow-start issues. What it does

• Provides the phase shift needed for a PSC fan motor to start and run correctly
• Common symptoms of failure: fan won't start, only hums, runs slowly, or starts intermittently
• Physical clues include a swollen case or heat-damaged terminals

• 1 capacitor

• Disconnect power at the breaker before servicing; capacitors can retain a charge
• Safely discharge the old capacitor and avoid shorting the terminals
• Note wire positions/take a photo and transfer wiring to the new part one-for-one
• Mount securely and keep leads clear of sharp edges and hot surfaces; test operation after reassembly

This replacement lens covers and protects the light on compatible Broan range hoods, restoring the fixture's finished appearance and even light diffusion. Durable plastic shields the bulb and helps prevent direct contact. What it does:

• Covers and protects the hood light fixture from grease, spills, and impact
• Diffuses light for more even illumination across the cooktop
• Replaces cracked, discolored, or missing lenses that cause glare or exposed bulbs
• Helps maintain a clean, finished look for the underside of the hood

• Disconnect power to the range hood before starting any work to avoid electrical shock.
• Usually installs by snapping into place or fastening with a small screw—handle gently to avoid cracking.
• Use a soft cloth and mild cleaner; avoid abrasive cleaners that can scratch the lens.

This replacement power module regulates and distributes electrical power within the unit, restoring proper fan and light operation when the original module fails.

• Controls power to the fan and lights for consistent performance
• Helps resolve issues like no power, fan not running, or lights not working
• Maintains safe operation by replacing a failed or shorted module
• Designed to fit the original location with existing connectors

• Disconnect power before servicing; capacitor and components can hold a charge
• Note wire and connector positions; take photos for reference
• Handle the board carefully; avoid static discharge and flexing the circuit
• Inspect harnesses and switches for heat damage before reassembly

Replacement mounting washer that secures fasteners and maintains proper spacing on blower, motor, and housing assemblies. Restores alignment and helps reduce vibration and rattling caused by loose or missing hardware. What it does:

• Provides a smooth bearing surface under a screw or nut to distribute load and prevent pull-through.
• Keeps mounting fasteners aligned and helps maintain correct spacing between components.
• Helps reduce vibration and noise from loose or worn hardware when installed properly.
• Useful when replacing corroded or damaged fastening hardware during routine repairs.

• Disconnect power to the appliance before beginning any repair.
• Match the washer to the original part (size and thickness) and install between the fastener head and the mounting surface.
• Do not overtighten fasteners—tighten just enough to secure the part and avoid crushing the washer.
• Replace any rusted or damaged screws, nuts, or complementary hardware for a reliable repair.

This metal mounting bracket secures range hood components in place to restore proper alignment and support. It replaces a damaged or missing bracket so parts sit securely and the hood operates without rattling or sagging. What it does

• Provides structural support for hood components and assemblies
• Restores proper alignment to reduce vibration and noise
• Helps maintain correct airflow by keeping parts positioned
• Common fix for loose, bent, or broken mounting points

• Basic hand tools required; for exact fastener locations
• Turn off power to the appliance before accessing internal parts to avoid injury
• Inspect nearby hardware and replace any stripped screws or damaged mounts for a secure fit

This electronic control board replaces the factory control module that operates the range hood's fan and lights, restoring reliable user input response and motor control. Fits select Broan ventilation units. What it does:

• Receives signals from the control panel and switches fan speeds and lights on/off
• Controls blower motor operation and speed selection
• Manages light circuits and any timed/auto features on supported hoods
• Can stop intermittent or non-responsive fan/light behavior when failed

• Disconnect power to the appliance at the breaker before starting any work
• Handle the board carefully to avoid static discharge or damage to components
• Verify mounting orientation and connector seating before reapplying power

This bottom decorative flue piece finishes the lower section of a range hood flue, restoring the unit's appearance and helping direct the duct cover fit. It's a direct-fit exterior trim part used where the flue meets the hood. What it does:

• Replaces the lower trim section of the hood flue to restore a clean, finished look
• Helps align the flue cover with the hood body for a proper exterior fit
• Addresses issues like a missing, dented, or cosmetically damaged bottom flue piece
• Works with the flue assembly to maintain the intended visual profile of the hood

• One bottom decorative flue piece as pictured

• Basic hand tools typically required; follow hood manufacturer instructions
• Remove power to the hood/light/fan before beginning any disassembly
• Handle painted or plated surfaces carefully to avoid scratching; support the flue during removal/installation to prevent bending

This decorative flue top is the upper trim piece that covers and finishes the exposed flue/chimney on compatible range hood assemblies, restoring a clean, finished look and helping keep grease and dust out of the flue area. What it does:

• Covers and conceals the exposed flue/chimney pipe for a finished appearance
• Helps keep grease, dust and debris from collecting in the flue opening
• Secures to the hood's flue assembly to reduce visible gaps and looseness
• Useful when replacing a damaged, dented or worn flue top that affects appearance

• Follow the hood manufacturer's instructions and shut off power to the appliance before starting work
• Some installations may require two people to lift and align the flue top safely
• Use appropriate hand tools and avoid scratching the finish during installation
• Verify proper fit to your specific hood flue assembly before final fastening