Kenmore Range Hood 233.50941590 (23350941590, 233 50941590) Parts

The Motor Assembly is an OEM part for Broan range hoods. This part is the driving force behind the extraction and circulation capabilities of your range hood, efficiently removing smoke, grease, and odors from the kitchen air. 

Causes for replacement include noticeable decreases in suction power, abnormal sounds indicating mechanical wear, or failure to start, all of which can compromise your kitchen's air quality and comfort.

Symptoms of a bad Motor Assembly include:

• A noticeable reduction in exhaust efficiency, failing to clear smoke or odors effectively.
• Increased noise levels, such as grinding, humming, or buzzing, suggesting the motor is struggling.
• The range hood not operating at all, pointing to a potential motor failure.

Color: white.

This replacement range hood filter maintains airflow and helps keep the cooking area cleaner by capturing airborne grease and particulates drawn through the hood. Replace when saturated or damaged to keep your hood performing as intended.

• Filters air drawn through the hood to trap grease and cooking byproducts
• Helps maintain consistent airflow and capture of smoke/steam
• Common replacement signs: heavy grease buildup, reduced ventilation performance, or a warped/loose filter
• Protects the blower and ducting by preventing debris from entering

• Disconnect power to the hood and allow all surfaces to cool; sheet-metal edges can be sharp—wear gloves
• Release the filter latch or tabs and slide out the old filter
• Install the new filter with the tab/latch oriented correctly; ensure it seats fully
• Restore power and verify the filter is secure and airflow is unobstructed

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

This switch assembly restores dependable control of your range hood or ventilation unit, helping resolve unresponsive or intermittent controls so the appliance turns on, off, and changes settings as expected.

• Provides the user interface to turn functions on/off and change settings
• Failure signs include no response on certain settings, intermittent operation, or a stuck/loose actuator
• Heat, moisture, and normal wear can degrade internal switch contacts over time
• Replacing the switch restores smooth, consistent operation

• Disconnect power at the breaker before servicing
• Access the control area and photograph wiring to document positions
• Move wires one at a time to the new switch; ensure tight, fully seated connections
• Reassemble and test all functions before finalizing

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

This retainer is a small mounting clip used in Broan ventilation hoods to hold trim, lenses, or small assemblies securely in place. Replacing a worn or broken retainer restores stable mounting and reduces vibration or rattling. What it does:

• Secures trim pieces, light lenses, or small assemblies so they stay aligned and seated
• Prevents parts from shifting or vibrating during operation
• Helps stop rattling or loose components around the hood opening
• Keeps replaceable covers and lenses from falling out when installed correctly

• Disconnect power to the appliance or turn the circuit breaker off before working on the hood
• Use common hand tools as needed; handle sharp sheet-metal edges with gloves
• Verify this retainer matches the damaged piece before installation

This socket is the lamp holder designed to secure and connect a light bulb to the appliance, restoring reliable illumination. It provides the physical and electrical connection needed for compatible appliance lamps. What it does:

• Holds the light bulb securely and provides the electrical contacts for operation
• Restores lighting when a damaged or worn socket causes flickering or no light
• Compatible with standard appliance lamp replacements that match the original socket type
• Helps maintain proper bulb alignment for reflectors and filters to work as intended

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Inspect wiring and connectors for damage; replace if frayed or corroded
• Reinstall bulb and any removed trim or housing panels securely before restoring power

This factory replacement cover fits select Broan ventilation units. It replaces a cracked, damaged, or missing cover to protect internal components, restore a clean finished appearance, and help maintain proper airflow and performance.

• Shields internal wiring, fan, or control components from debris and accidental contact
• Helps direct airflow through the housing for consistent operation
• Restores a secure fit if the original cover is cracked, warped, or broken
• Common symptoms include rattling/vibration, poor fit, exposed parts, or a loose/missing cover

• Disconnect power to the unit before servicing
• Support the cover and remove retaining screws or release tabs; note orientation for reassembly
• Transfer any clips, grommets, or seals from the old cover if applicable
• Reinstall securely without overtightening; verify clearance and operation before restoring power

This name plate is the small identification label that mounts to the appliance to display model and serial information. It restores a legible ID label so you can easily identify the unit for service or parts ordering. What it does:

• Replaces a missing, worn or damaged identification label
• Provides visible model/serial and manufacturing information for repairs
• Restores the appliance's factory identification for resale or inspection

• Clean and dry the mounting surface before installing for best adhesion
• Peel backing or attach with the existing fasteners, aligning carefully to avoid wrinkles
• If the old label is stuck, remove it gently with a plastic scraper and an appropriate adhesive remover
• Always disconnect power to the appliance before performing any service that requires access to internal panels

This mount is the replacement mounting bracket that secures range hood/ventilation components to the cabinet or chassis, restoring proper support and alignment for safe operation. What it does:

• Provides a secure attachment point for the hood or internal parts to prevent sagging or movement
• Helps maintain correct alignment for ducting and components to reduce vibration and noise
• Replaces damaged, bent, or corroded mounting hardware that can compromise fit and stability
• Commonly used when the hood shifts, sits unevenly, or produces rattling during use

• Turn off power to the appliance at the breaker before beginning any work
• Use appropriate screws/fasteners and torque to OEM recommendations; replace any stripped hardware