Bosch Refrigerator B30IB800SP Parts

Secures and guides your refrigerator door for smooth opening and closing. Replace if your door sags, doesn't align, or fails to seal properly. Verify fit with your model number.

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

If your freezer isn't maintaining proper temperature or runs constantly, the temperature sensor may have failed. This sensor monitors interior temps.

This replacement strip is a molded trim piece that covers and protects an appliance panel edge for a clean finished appearance and helps keep wiring and components tucked away. It restores the original look and helps prevent snags or abrasions. What it does:

• Covers exposed panel edges and seams for a finished appearance
• Holds and protects underlying components or wiring from contact
• Prevents fabric/snags and reduces the chance of accidental catching on the edge
• Helps maintain the appliance's original fit-and-clearance where installed

• One strip/trim piece as shown

• Disconnect power to the appliance before starting any work
• Installation may require removing the outer panel or control panel to access mounting area
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If fasteners, clips, or adhesive are required, reuse the factory hardware or replace with OEM-specified parts

Fix intermittent filling or valve clicking with this refrigerator valve magnet solenoid coil. Restores reliable valve actuation and water flow control.

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

This operating module is the electronic control that manages your appliance's user commands and cycle functions, restoring reliable control and responsive operation when the original module fails. What it does:

• Receives and processes user inputs from the control panel so cycles start and run correctly
• Controls timing, indicators and interlocks for proper cycle sequencing
• Replaces a failed control to stop issues like unresponsive buttons, missing displays, or erratic cycle behavior
• Works as the central logic board coordinating sensors and actuators during operation

• One operating module (electronic control) as shown

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle the module carefully; avoid static discharge and secure connectors firmly
• Require removal of the front console or control panel to access; keep fasteners and trim parts organized

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.

Secures panels, trim, and internal components in your refrigerator. Replace if the original clip is cracked, broken, or missing to restore proper fit.

A replacement water inlet valve assembly that controls water entry to the appliance for proper fill cycles and normal operation. Restores reliable filling and helps stop unwanted leaks or no-fill conditions. What it does

• Opens and closes to let water into the unit during fill cycles.
• Helps maintain correct water level for washing and rinsing.
• Can stop water flow when the cycle is finished or if a fault is detected.
• Commonly associated with symptoms such as no water fill, slow fill, unit not starting due to low water, or visible leaks at the valve.

• Disconnect power and shut off the water supply before starting any repair.
• Handle electrical connections and hose fittings carefully; replace any damaged clamps or seals.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A single mounting screw used to secure appliance panels and components. This genuine replacement restores proper fastening to prevent loose trim, panels, or brackets and helps stop rattles or movement. What it does:

• Fastens panels, trim pieces, or internal brackets to the appliance frame
• Restores secure attachment where a screw is stripped, lost, or damaged
• Reduces vibration-related noise from loose panels or parts
• Works with the original threads and mounting points for correct fit

• One mounting screw

• Use the correct driver to avoid stripping the screw head
• Tighten until snug; do not overtighten to prevent damage to threads or panels
• Disconnect power and follow appliance safety guidelines before working on the unit
• If replacing multiple fasteners, verify all similar screws are the correct length and type

Note: Kit of 2 rails

If your refrigerator isn't cooling properly or cycles erratically, a faulty temperature sensor is often the cause. This NTC thermistor restores regulation.

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.