Bosch Refrigerator B30IB905SP Parts

This replacement strip restores a clean, factory fit where it's used on the appliance. Replacing a worn or missing strip helps secure adjoining pieces, maintain spacing, and eliminate unsightly gaps or vibration-related noise. What it does:

• Acts as a finishing/spacer strip between adjoining components
• Helps hold trim or panel pieces in the correct position
• Maintains alignment and clearances to prevent rubbing or rattling
• Common symptoms: cracked or missing strip, visible gap, loose trim/panel, buzzing or vibration noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Refer to your model's parts diagram for the correct orientation and attachment points
• Reuse original screws/clips if required; hardware is typically model-specific
• After installation, verify proper alignment and operation of adjacent panels/doors

Secures and guides your refrigerator door for smooth opening and closing. Replace if your door sags, doesn't align, or fails to seal properly. Verify fit with your model number.

Factory trim strip that finishes assembly edges on select appliances. Replace cracked, broken, or missing strips to restore a clean appearance.

The Tray is an OEM part for Bosch refrigerators. It is a versatile storage component designed to fit securely on the interior of the refrigerator door. This tray provides a convenient and accessible space for storing smaller items, such as condiments, jars, cans, or bottled beverages.

Causes of a bad refrigerator door tray can include excessive force when opening/closing the door, impact from falling items, or general wear and tear over time.

Symptoms of a bad tray include:

• Cracks or damage that can cause leaks or spills
• Warping or difficulty sliding in and out of the door
• Missing or broken compartments, limiting storage capacity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This upper rack rail provides a smooth sliding track for the dishwasher's upper rack, restoring proper movement and alignment so dishes load and unload easily. What it does:

• Replaces a worn or damaged upper rack guide to restore smooth in-and-out movement
• Prevents rack wobble, binding, or derailment during use
• Helps keep dishes and glassware properly positioned while the rack moves
• Useful when the rack binds, skips, or falls off its track

• Disconnect power and turn off water to the appliance before starting any repairs
• Remove the upper rack to access the rail; preserve any mounting clips or screws for reinstallation
• Inspect adjacent rollers, clips, and fasteners and replace if worn for reliable operation

This replacement strip is a molded trim piece that covers and protects an appliance panel edge for a clean finished appearance and helps keep wiring and components tucked away. It restores the original look and helps prevent snags or abrasions. What it does:

• Covers exposed panel edges and seams for a finished appearance
• Holds and protects underlying components or wiring from contact
• Prevents fabric/snags and reduces the chance of accidental catching on the edge
• Helps maintain the appliance's original fit-and-clearance where installed

• One strip/trim piece as shown

• Disconnect power to the appliance before starting any work
• Installation may require removing the outer panel or control panel to access mounting area
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If fasteners, clips, or adhesive are required, reuse the factory hardware or replace with OEM-specified parts

The Sensor is an OEM component specifically designed for Bosch refrigerators. It plays an integral role in monitoring temperature and humidity levels inside the refrigerator and freezer compartments. The sensor works together with the electronics package to regulate cooling power to maintain consistent performance.

Some causes of a bad sensor can include damage due to frequent temperature fluctuations, moisture intrusion into the sensor area, or failure of the electronic components. 

Symptoms of a bad sensor include: 

• Inconsistent or fluctuating temperatures inside the fridge/freezer
• Ice buildup in undesired areas 
• Food not staying fresher for as long 
• Error codes displayed related to sensor issues

This Bosch sensor part is compatible with Thermador, Gaggenau, and some Kenmore models as well. Replace yours today with this genuine OEM sensor to restore proper cooling functionality.

This replacement cover shields and secures a designated opening or component inside the appliance. It helps protect internal parts from debris and accidental contact to maintain safe operation and a clean, finished appearance.

• Provides a protective barrier over an opening or assembly to shield internal components
• Restores proper fit and appearance when the original cover is cracked, warped, or missing
• Helps reduce rattling or vibration caused by a loose or damaged cover
• Ensures the area remains securely closed when tabs/fasteners are properly engaged

• Disconnect power before servicing; shut off water supply if applicable
• Note the orientation of the original cover; transfer any clips/seals/screws if designed to be reused
• Seat the new cover fully and engage all locking tabs or fasteners; do not overtighten
• The cover stays secure and does not interfere with adjacent parts during operation

Fix frost buildup in your freezer with this refrigerator defrost heater. Melts ice on evaporator coils to restore proper cooling. Moderate DIY repair.

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

Decorative trim that covers the gap between door and control panel. Replace when cracked, broken, or missing to restore the finished appearance.

This fan is the OEM-style cooling blower used to circulate air for component and cabinet cooling. It restores proper airflow to help reduce overheating, excessive noise, and cooling-related performance issues. What it does

• Circulates air across motors, electronics, or heat exchangers to maintain safe operating temperatures.
• Helps prevent overheating and thermal shutdowns by moving warm air away from components.
• Reduces noise and vibration when a worn or imbalanced fan is replaced.
• Common symptom: loud or rattling noise, weak/no airflow, or intermittent thermal-related faults.

• Disconnect power to the appliance before starting any repair.
• Handle the fan and surrounding components carefully; avoid bending blades or damaging the motor leads.
• Verify mounting orientation and secure all fasteners; wiring connections match the original.
• After installation, restore power and run the appliance to confirm normal airflow and quiet operation.

This blower fan assembly circulates air to cool and ventilate the appliance, helping maintain proper operating temperature and airflow for reliable performance. It replaces a worn or noisy fan to restore normal ventilation. What it does:

• Moves air through the appliance to prevent overheating of components
• Reduces unusual noise or vibration caused by a failing fan
• Helps maintain consistent internal temperatures for proper operation
• Supports cooling of motors, electronics, or heating compartments as applicable

• One blower fan assembly (motor with attached fan blade)

• Disconnect power before attempting any service to avoid shock or injury
• Access may require removing panels or housing; keep track of fasteners
• Inspect mounting and wiring; replace only if confirmed compatible with your model