Bosch Refrigerator B36BT830NS Parts

Fix intermittent filling or valve clicking with this refrigerator valve magnet solenoid coil. Restores reliable valve actuation and water flow control.

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

Replace damaged or missing insulation panel inside your refrigerator cabinet. Restores thermal control and reduces noise. Use when original is torn or worn.

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.

Secures panels, trim, and internal components in your refrigerator. Replace if the original clip is cracked, broken, or missing to restore proper fit.

Small metal or plastic washer used in upright freezers. Installs between mounting surfaces to provide spacing, reduce vibration, or seal connections. Replace if missing, cracked, or corroded to ensure proper assembly and prevent component damage.

Replacement end cap for oven door handles. Fits at either end of the handle assembly to provide a finished look and comfortable grip. Replace if cracked or missing.

A replacement water inlet valve assembly that controls water entry to the appliance for proper fill cycles and normal operation. Restores reliable filling and helps stop unwanted leaks or no-fill conditions. What it does

• Opens and closes to let water into the unit during fill cycles.
• Helps maintain correct water level for washing and rinsing.
• Can stop water flow when the cycle is finished or if a fault is detected.
• Commonly associated with symptoms such as no water fill, slow fill, unit not starting due to low water, or visible leaks at the valve.

• Disconnect power and shut off the water supply before starting any repair.
• Handle electrical connections and hose fittings carefully; replace any damaged clamps or seals.

The ice maker assembly is the complete ice-producing unit located in the freezer compartment that includes the motor, mold, and harvest components. Replace when it stops making ice entirely, produces malformed ice, or makes excessive noise during operation.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A single mounting screw used to secure appliance panels and components. This genuine replacement restores proper fastening to prevent loose trim, panels, or brackets and helps stop rattles or movement. What it does:

• Fastens panels, trim pieces, or internal brackets to the appliance frame
• Restores secure attachment where a screw is stripped, lost, or damaged
• Reduces vibration-related noise from loose panels or parts
• Works with the original threads and mounting points for correct fit

• One mounting screw

• Use the correct driver to avoid stripping the screw head
• Tighten until snug; do not overtighten to prevent damage to threads or panels
• Disconnect power and follow appliance safety guidelines before working on the unit
• If replacing multiple fasteners, verify all similar screws are the correct length and type

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Refrigerator running warm or loud? This insulation pad restores thermal protection, reduces heat transfer, and dampens noise. Easy DIY fix.