Bosch Refrigerator B36BT930NS Parts

Stores and dispenses ice cubes in your refrigerator freezer. Replace a cracked, warped, or missing ice bin to keep cubes contained and hygienic.

Replace a frayed or damaged power cord that's causing no power or intermittent operation. Direct plug-in replacement restores safe electrical connection.

This factory strip is a trim piece that finishes and protects an exposed edge or gap on your appliance. Replacing a cracked or missing strip restores a clean look and helps panels align and stay secure. What it does

• Finishes an exposed seam or edge as designed by the manufacturer
• Helps keep adjacent panels aligned and secure
• Can reduce vibration-related rattles when properly seated
• Common signs of failure: loose or missing trim, visible gaps, warping, cracks, or buzzing/rattling noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Note the strip's orientation; remove any screws/clips and gently release tabs
• Reuse or transfer original fasteners/clips as required by your model
• Align carefully and avoid overtightening to prevent damage to the strip or surrounding panels

This evaporator fan circulates cold air through the freezer/refrigerator evaporator to help maintain even cooling and proper temperature. Replacing a worn or noisy fan can restore airflow and improve cooling performance. What it does:

• Moves air across the evaporator coil to distribute cold air throughout the compartment
• Helps prevent frost buildup by maintaining steady airflow over the evaporator
• A noisy, vibrating, or non-spinning fan can cause poor cooling or uneven temperatures
• Restores proper circulation when the original fan motor or blade is damaged or fails

• One evaporator fan assembly

• Disconnect power to the appliance before attempting any repair to avoid electric shock
• Access may require removing interior panels or the evaporator cover; follow OEM diagram for your model
• Handle the fan blades and motor carefully to avoid bending blades or damaging the motor shaft

A replacement handle strip that restores the finished look and cover at the appliance door handle area. Replaces worn, scratched or missing trim to improve appearance and protect handle mounting points. What it does:

• Covers the door handle area and provides a finished trim piece
• Hides mounting hardware and helps prevent dirt buildup around the handle
• Restores cosmetic appearance when original trim is scratched, dented, or missing
• Used with original handle assembly to complete the door finish

• Disconnect power to the appliance before beginning any repair
• Handle carefully to avoid scratches; use proper tools and follow OEM instructions

This replacement strip restores a clean, factory fit where it's used on the appliance. Replacing a worn or missing strip helps secure adjoining pieces, maintain spacing, and eliminate unsightly gaps or vibration-related noise. What it does:

• Acts as a finishing/spacer strip between adjoining components
• Helps hold trim or panel pieces in the correct position
• Maintains alignment and clearances to prevent rubbing or rattling
• Common symptoms: cracked or missing strip, visible gap, loose trim/panel, buzzing or vibration noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Refer to your model's parts diagram for the correct orientation and attachment points
• Reuse original screws/clips if required; hardware is typically model-specific
• After installation, verify proper alignment and operation of adjacent panels/doors

Secures and guides your refrigerator door for smooth opening and closing. Replace if your door sags, doesn't align, or fails to seal properly. Verify fit with your model number.

Factory trim strip that finishes assembly edges on select appliances. Replace cracked, broken, or missing strips to restore a clean appearance.

Replacement mounting bracket that secures internal components and maintains proper alignment. Needed when original support is cracked, broken, or loose.

This support mounting bracket secures internal components and helps keep assemblies aligned for reliable operation. It replaces worn or damaged supports to restore proper fit and reduce movement that can cause noise or poor performance. What it does:

• Provides structural support to hold panels, housings, or assemblies in correct position
• Prevents sagging, misalignment, and excessive vibration or rattling during operation
• Restores secure mounting where original bracket is cracked, bent, or broken
• Helps maintain proper clearances to avoid rubbing or interference with moving parts

• One support (mounting bracket)

• Disconnect power and water before beginning any repair
• Use basic hand tools; handle sharp edges carefully and wear gloves
• Verify correct orientation and secure fasteners to manufacturer torque specs when available

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This is a strip that helps release ice from the ice maker mold so cubes can drop into the storage bin. It acts as a guide or ejector aid during the ice harvesting cycle. Replace this part if ice cubes are not ejecting properly, getting stuck in the mold, or if the ice maker produces misshapen or clumped ice.

Fix intermittent filling or valve clicking with this refrigerator valve magnet solenoid coil. Restores reliable valve actuation and water flow control.

This replacement cover shields and secures a designated opening or component inside the appliance. It helps protect internal parts from debris and accidental contact to maintain safe operation and a clean, finished appearance.

• Provides a protective barrier over an opening or assembly to shield internal components
• Restores proper fit and appearance when the original cover is cracked, warped, or missing
• Helps reduce rattling or vibration caused by a loose or damaged cover
• Ensures the area remains securely closed when tabs/fasteners are properly engaged

• Disconnect power before servicing; shut off water supply if applicable
• Note the orientation of the original cover; transfer any clips/seals/screws if designed to be reused
• Seat the new cover fully and engage all locking tabs or fasteners; do not overtighten
• The cover stays secure and does not interfere with adjacent parts during operation

This heating element assembly is installed in the mullion - the vertical divider between the refrigerator and freezer doors. It prevents condensation and moisture buildup from forming on the exterior surface between the doors. Replace this assembly if you notice water dripping or excessive moisture collecting around the door divider area.