Bosch Refrigerator CIB36P00 Parts

Refrigerator not cooling properly or running constantly? The temperature sensor monitors internal temps and signals the control board. DIY-friendly repair.

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation

If your refrigerator isn't cooling properly or cycles erratically, a faulty temperature sensor is often the cause. This NTC thermistor restores regulation.

Mounting hardware kit secures refrigerator components in place. Replaces worn, missing, or damaged fasteners that cause rattling or loose parts inside unit.

Small plastic clip that secures components inside your refrigerator. Replace if cracked, broken, or missing to restore proper fit and alignment.

This hinge pin secures the door hinge mechanism and allows your refrigerator or freezer door to pivot smoothly. It maintains proper door alignment and prevents the door from sagging or binding. Replace this part if your door won't close properly, sags when opened, or if you hear squeaking or grinding when opening the door.

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement mounting fixture for bottom-mount refrigerators. Secures internal components and keeps panels or racks properly aligned. Needed when broken or worn.

Restores proper door alignment and smooth operation. Replace if your refrigerator door sags, drags, or has uneven gaps. Verify fit with your model number.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

Installation hardware set for refrigerators. Includes mounting brackets, screws, and fasteners needed to secure your appliance during setup or replacement.

Interior cabinet divider wall that restores proper compartment separation in your refrigerator. Replaces cracked, broken, or missing dividers.

This is a wheel assembly designed for use in a refrigerator or freezer. It supports the smooth rolling movement of components such as drawers, baskets, or the unit itself. Replace this wheel if it is cracked, worn, or no longer rolling freely, which can cause drawers to stick or the appliance to be difficult to move.

This fixture is a small mounting bracket that secures internal dishwasher components to the tub, helping maintain proper alignment and reduce vibration. Replaces worn or broken brackets to restore stable operation and prevent rattling or misalignment. What it does:

• Secures internal parts and assemblies to the dishwasher tub or frame
• Keeps components aligned to prevent rubbing, noise, or premature wear
• Helps maintain proper clearance for moving parts like racks or spray arms
• Can prevent intermittent contact that might cause rattles or vibration

• Disconnect power and water supply before starting any service
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit
• Typically installs with basic hand tools; follow OEM instructions for correct placement

Factory trim strip that finishes edges and covers seams on your refrigerator. Replace if cracked, worn, or missing to restore clean appearance.