Bosch Range HGI8056UC Parts

Fix uneven flames or burner ignition issues with this cooktop burner cap. Distributes gas flame evenly and protects the burner head from spills.

If your cooktop burner won't heat evenly or has visible cracks, this surface burner restores safe, efficient cooking. Direct replacement component.

Uneven flame or poor ignition? A damaged burner cap disrupts flame shape and heat distribution. This replacement cap restores even cooking and safety.

Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.

If your gas burner won't light or only ignites intermittently, this spark electrode creates the spark needed to ignite the gas at the burner head.

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Weak flames or uneven heating? This burner tube routes gas to flame ports for proper cooking zone heat. Fixes poor burner performance on gas ranges.

This replacement tube provides a sealed path for water or air between internal components, restoring a secure, leak-free connection. Replace brittle, cracked, or clogged tubing to prevent leaks and maintain proper flow and pressure.

• Routes water, steam, or air between components as designed
• Replaces damaged, hardened, or kinked tubing that can leak or restrict flow
• Helps maintain correct pressure and flow for reliable operation
• Typical symptoms include leaks/drips, puddling, reduced or erratic flow, or related error codes

• Disconnect power and shut off any water supply; allow unit to cool and relieve pressure before service
• Note original routing and connection points; transfer or replace clamps/seals as needed
• Seat tubing fully on fittings and ensure it's routed without kinks or sharp bends
• Restore supply and run a test cycle while checking closely for leaks

Leveling foot for electric and gas ranges. Adjustable metal foot installs at base corner. Replace if cracked, broken, or missing to level your range.

Restores even gas flow and reliable ignition on your cooktop. Replace if burners won't light, flame is uneven, or performance has declined. Confirm fit.

This replacement tube carries water or air between internal components in your appliance. Replacing a cracked, brittle, or leaking line restores proper flow and helps prevent drips, odors, and performance issues.

• Creates a sealed path to transfer fluid or air between assemblies
• Supports correct fill, drain, or dispensing where used
• Typical failure signs: leaks, visible cracks, kinks, or moisture under the unit
• May trigger flow-related errors or weak operation in the affected system

• Unplug the appliance and shut off the water supply (if applicable) before service
• Note the original routing; transfer any clips, clamps, or connectors from the old line
• Fully seat and tighten connections; avoid sharp bends or kinks
• Restore power/water and test the unit; check all joints for leaks

Oven door won't latch or stays locked? This door latch secures your oven door during cooking and prevents accidental openings. Moderate DIY repair.

Restore oven visibility with this complete light assembly. Replace when bulb won't light, lens is cracked, or socket is damaged. Verify fit with your model.

Broken or damaged cooktop grates leaving cookware unstable? This gas range grate set restores steady support and proper burner alignment for even cooking.

Uneven baking or slow cooking? This convection fan circulates heated air throughout your range oven for consistent, professional cooking results.

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.