Bosch Freezer KAD62V40 Parts

This is a plastic drip tray that sits beneath the water or ice dispenser on the front of your refrigerator to catch spills and drips. It snaps into place and can be removed for easy cleaning. Replace this tray if it is cracked, warped, discolored, or no longer fits securely in its mounting position.

Freezer not staying cold? This refrigerator freezer fan motor circulates air to maintain proper temperatures. Fixes warm freezer issues.

Refrigerator not cooling or running constantly? The condenser removes heat from the refrigerant. This repair takes 1-2 hours with moderate skill.

This interference capacitor suppresses electrical noise and radio-frequency interference to help the appliance's electronics run more reliably. It fits on the control board and supports stable operation by filtering stray voltage spikes. What it does:

• Filters electrical and radio-frequency interference that can cause erratic control behavior or false error codes
• Reduces electrical noise that can affect nearby audio or radio reception
• Helps protect control circuitry from transient voltage spikes
• Commonly used when appliance exhibits intermittent faults or unexplained control glitches

• Disconnect power to the appliance before starting any repair
• Discharge capacitors and avoid touching leads; use insulated tools and follow safe-handling practices
• Replace only with the exact part specified for your model and secure all wire connections firmly

Refrigerator not cooling properly or running too warm? This fan motor powers the blower to circulate air and maintain proper temperatures throughout your fridge.

Fixes no water dispensing or slow ice production. This refrigerator water tank stores water for the dispenser and ice maker. DIY-friendly repair.

This door seal fits around the dishwasher tub opening to keep water and steam inside during cycles. Replacing a worn gasket restores a tight seal so the door latches properly and helps prevent leaks at the sides or bottom.

• Creates a watertight barrier between the door and tub during wash and rinse cycles
• Helps contain steam and reduce moisture escaping from the front of the unit
• Replaces a flattened, cracked, torn, or deformed seal that can cause leaks
• Common symptoms include drips at the front edge, water on the floor near the door, and needing extra force to latch

• Disconnect power and, if applicable, shut off the water supply before servicing
• Pull the old seal from the channel; clean the groove and mating surfaces thoroughly
• Press the new seal in evenly without stretching; seat corners fully and position the joint at the bottom center
• Close the door to help the seal set; a snug fit at first is normal

Fix a sagging or misaligned refrigerator door with this door hinge. Restores smooth opening, closing, and proper latching. Moderate DIY repair.

Restores smooth door operation and proper alignment on your refrigerator. Replace when doors wobble, bind, or make noise during opening and closing.

Access panel cover for refrigerators. Protects internal components and wiring. Replace if cracked, broken, or missing to restore appearance and shield parts.