Bosch Dishwasher SHV89PW73N Parts

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replace a damaged or frayed power cord to restore safe electrical connection. This cord supplies AC power from wall outlet to your appliance.

Secures threaded connections in your dishwasher to keep components tight and stable. Replace if cracked, stripped, or broken to restore proper fastening.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Dishwasher bottom case base assembly forms the lower enclosure protecting internal components. Replace if cracked, broken, or damaged to restore stability.

Reduces hard-water minerals to prevent spotting and buildup on dishes and glassware. Replace when dishes show mineral deposits. Verify fit by model number.

Replace your broken or cracked dishwasher detergent dispenser door lid. This cover installs on the dispenser compartment to keep detergent secure.

This auxiliary service tool is used to perform specific installation and repair steps as defined by the manufacturer. It helps technicians safely engage, align, or remove components during approved procedures on compatible appliances. What it does:

• Provides the exact tool profile specified by the manufacturer for select service procedures
• Assists with controlled removal/installation of clips, springs, or fittings as directed in service literature
• Helps align or seat components during assembly to prevent damage
• Intended for use by trained servicers following the official procedure for your model

What's included: 1 auxiliary tool Install notes:

• Disconnect power and shut off water and/or gas before servicing
• Follow your model's official service manual for when and how to use this tool
• Wear protective gloves and eye protection; parts may have sharp edges or spring tension
• Keep hardware organized and correct operation and leak-free connections before restoring service

Trim strip finishes the exposed edge of your dishwasher where it installs. Replace if cracked, broken, or missing to restore a clean, finished look.

Does your dishwasher shake or make loud noises during the wash cycle? A worn suspension damper may be the cause. This part absorbs vibration and stabilizes the tub.

Supports smooth rotation of moving components in your dishwasher. Replace when you hear grinding or squealing noises to restore quiet operation. Verify fit with your model number before ordering.

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

Leaking water around the inlet valve? This rubber inlet seal creates a watertight connection at your dishwasher's water inlet to stop drips and leaks.

This base panel is the lower access kickplate that covers and protects the appliance's underside components while keeping a finished look at the front. It restores protection and appearance after damage or corrosion. What it does:

• Covers the appliance's lower front area to protect wiring, motors and other internal parts from debris
• Helps prevent drafts and keeps the cabinet base looking finished
• Common symptom: cracked, bent or missing lower panel exposing components
• Common symptom: rattling or scraping noises from loose or damaged kickplate
• Common symptom: cosmetic damage or rust on the lower front of the appliance

• One base panel

• Disconnect power (and water, if applicable) before beginning any work
• Typically installs from the front with a few screws or clips; small hand tools are usually required
• Handle edges carefully—metal panels can have sharp edges
• Secure all fasteners before returning the appliance to service

Replace your dishwasher's front cabinet trim frame if cracked, broken, or missing. Restores clean appearance and secures control panel alignment.