Bosch Dishwasher SHX78CM5N Parts

Factory mounting screw secures panels, brackets, and internal components in your dishwasher. Replace missing, stripped, or damaged screws during repair.

Replace your cracked, bent, or missing dishwasher door handle. Restores a secure grip for easy opening and closing while improving appearance.

This replacement rack rail restores smooth, stable sliding for a dishwasher rack, helping keep the rack aligned and reduce catching or derailment. It's the straightforward part to repair worn or damaged rack movement. What it does:

• Guides the dishwasher rack along its track so the rack opens and closes smoothly
• Replaces a bent, cracked, or worn rail that can cause the rack to stick or come off track
• Reduces noise and rubbing caused by damaged or misaligned rail components
• Helps maintain proper rack alignment for loading and unloading dishes

• Disconnect power to the appliance before servicing to prevent electrical hazard
• Remove the affected rack and any end caps or clips to access and replace the rail
• Inspect matching rail clips/wheels for wear and replace if needed for proper function

Fix loose or rattling dishwasher components with this holder retainer. Secures parts in position to prevent movement and restore quiet operation.

This outer door front panel replaces a damaged or worn dishwasher door exterior to restore appearance and protect internal door components. It provides the visible finish and mounting surface for trim, handles, and latch hardware. What it does:

• Restores the dishwasher's exterior finish and hides internal components
• Provides mounting surface for handle, trim, and latch assemblies
• Helps maintain door alignment and a proper seal when installed correctly
• Replaces panels that are dented, cracked, scratched, rusted, or cosmetically worn

• Disconnect power and water to the appliance before beginning any repair
• Support the door during removal to avoid damaging hinges or wiring
• Remove and transfer any trim, handle, latch, and insulation exactly as removed
• Adjust hinge positioning if needed for a proper seal

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

This is a replacement door handle that restores a secure grip and proper door operation when the original handle is cracked, loose, or broken. It provides a like-for-like cosmetic and functional restore for the appliance door. What it does:

• Replaces a damaged or worn door handle so the door can be opened and closed normally
• Provides a solid, ergonomic grip to prevent slips and accidental drops
• Helps restore door alignment when handle-related stress has caused misalignment
• Matches the OEM fit and mounting points for a straightforward swap

• One door handle

• Turn off and unplug the appliance (or shut off power) before servicing
• Remove any decorative trim or access panels to reach the handle fasteners
• Keep all original screws and mounting hardware; replace only if damaged

Replacement rack wheel that restores smooth rolling movement to your dishwasher rack. Needed when the original wheel is cracked, worn, broken, or missing.

Dishes not getting clean? A worn or clogged lower spray arm reduces water coverage. This part restores rotating spray for thorough cleaning. Easy DIY fix.

The Dishwasher Installation Set is an OEM part for Bosch dishwashers. This set contains all necessary hardware for professional installation or replacement, including leveling legs, mounting brackets and anti-tip brackets. Manufactured from corrosion-resistant steel, these parts securely fasten the dishwasher into place.

Causes relate to normal wear over time from use. Improper original installation may also compromise individual parts. Failing to properly level, brace or anchor the dishwasher leads to unnecessary stresses.

Symptoms of worn or missing installation hardware include:

• Looseness, shaking or movement during operation
• Doors failing to properly self-close or seal fully
• Leaks developing around dishwasher connections
• Installation not compliant with current regulations

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement rail that guides your dishwasher rack smoothly along its track. Installs on the rack assembly to restore proper gliding when original is worn, broken, or missing.

This crockery basket replaces the dishwasher's small-item rack to keep forks, knives, cups and other items organized for better cleaning and drying. It restores proper spacing so water can reach small dishes. What it does:

• Holds cutlery, small cups and loose items to prevent shifting during wash cycles
• Keeps items separated for improved water and detergent access
• Helps prevent clattering and potential damage to dishes and silverware
• Restores proper fit and functionality when original basket is cracked, broken or missing

• Disconnect power and water to the appliance before servicing
• Remove the dishwasher rack and slide or snap the basket into the rack openings
• Inspect rack tracks and adjacent clips for damage; replace if needed to ensure correct alignment
• Do not overload the basket; place utensils handles-down where safe and allowed by your dishwasher's instructions

Secures internal dishwasher components and keeps assemblies aligned. Replace this mounting clip holder if yours is cracked, broken, or missing.

Replace a cracked, broken, or missing housing cover that protects internal components. Secures wiring and parts while keeping debris out of your appliance.

Insulating pad for dishwashers. Installs on the tub or door to reduce noise and retain heat. Replace if cracked, torn, or missing for proper insulation.

Replacement protective cover housing for dishwashers. Shields internal components from debris and moisture. Needed when original panel is cracked or missing.