Bosch Washer WFL2440 Parts

Coupling that connects the program knob to the timer mechanism on your washer. Replace if cracked, stripped, broken, or missing for proper cycle selection.

Replace a broken spin speed knob coupling if your washer control knob spins freely or won't change settings. Simple DIY repair in under 30 minutes.

This single-use dishwasher cleaner removes limescale, grease and odor-causing residue from the interior and spray arms to help restore cleaning performance. It's designed for routine maintenance between deep-clean services. What it does:

• Dissolves limescale, hard-water buildup and mineral deposits that can reduce spray-arm flow and detergent action
• Breaks down grease and food film that cause lingering odors or cloudy glassware
• Helps clear residue from seals, filter housing and spray nozzles for more consistent wash results
• Safe for use in dishwasher tubs and internal components when used as directed

• One single-use bottle of dishwasher cleaning solution

• Follow the dishwasher maker's directions: typically empty dishwasher, place bottle in the rack or dispenser, run the specified cleaning cycle
• Use only as directed; do not mix with other chemicals or detergents
• Keep out of reach of children and pets; avoid contact with skin and eyes — rinse thoroughly if contacted
• Dispose of container per local regulations after use

Replace a worn, cracked, or loose spin speed selector dial on your washer. This control knob installs on the control panel to restore clear settings.

Speed nut secures the fascia panel on your washer. Replace if the original nut is stripped, missing, or no longer holding the panel firmly in place.

Fix washer not draining or slow drainage with this drain pump tube. Connects pump to reservoir. Moderate DIY repair, typically 30-45 minutes.

13mm wrench designed for washer installation and maintenance. Used to remove shipping bolts and adjust leveling legs. Replace if lost or damaged.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

Washer sump hose drains water from the pump to the drain outlet. Replace if leaking, cracked, or damaged. Verify fit with your model number before ordering.

This dispenser tray is a removable insert that fits inside the detergent dispenser drawer of a washing machine. It separates compartments for detergent, bleach, and fabric softener so each is dispensed at the correct point in the wash cycle. Replace this tray if it is cracked, warped, or clogged with residue that cannot be cleaned, which can cause improper dispensing of laundry products.

This is the inner drum (spin basket) where laundry is placed during a wash cycle. It rotates at high speed to agitate and extract water from clothes. Replace this drum if it has cracks, chips, or excessive rust that is snagging or staining clothing, or if the basket wobbles and produces loud banging noises during the spin cycle.