Bosch Dryer WTL5400 Parts

This is a bearing used in the dryer drum support assembly. It allows the drum to rotate smoothly during operation by reducing friction between moving components. Replace this bearing if the dryer produces squealing, grinding, or rumbling noises during tumbling, or if the drum becomes difficult to turn by hand.

This float detects water level inside the dishwasher tub and helps the control prevent overfill for reliable washing. Replaces the worn or stuck tub float to restore proper water-level sensing and reduce overflow risk. What it does:

• Rises and falls with tub water to engage the water-level sensing system
• Helps the control stop filling when the correct water level is reached
• Common symptom: dishwasher overfills, leaks at the base, or shows continuous fill/drain cycles
• Common symptom: dishwasher stops mid-cycle or fails to start a fill due to a stuck or damaged float

• One float

• Disconnect power (unplug or switch off breaker) and turn off water supply before beginning
• Access typically from the dishwasher tub base or by removing the lower kickplate; your model's service instructions
• Handle the float and surrounding components gently; avoid forcing plastic tabs or clips
• After replacement, run a short test cycle to ensure normal fill and that leaks are not present

Drum support plate for dryers. Mounts beneath the drum to provide structural support. Replace if cracked, warped, or causing alignment issues.

Secures and supports your dryer's drive pulley for smooth belt and drum operation. Replace when worn to restore proper pulley alignment and reduce noise.

This OEM-grade silicone lubricant helps reduce friction and protect rubber seals, gaskets and moving plastic parts from wear. It keeps components moving smoothly and helps maintain appliance performance over time. What it does:

• Reduces friction on sliding parts, hinges and rollers to prevent sticking and squeaks
• Protects rubber seals and gaskets from drying, cracking and premature wear
• Helps preserve plastic and metal contact points exposed to moisture
• Safe for use on appliance components where silicone-based grease is recommended

• Apply a thin, even layer only to the intended contact surfaces; avoid excess that can attract debris
• Do not apply near electrical contacts, heating elements or motor windings
• Wear gloves and follow manufacturer safety guidance; keep out of reach of children

If your dryer door won't stay closed or the latch broke off, this door latch fixes the problem. Quick 15-minute DIY repair with a Torx screwdriver.