Gaggenau Range ED230130 Parts

This is a steamer heating element made to be used on wall oven units. This particular part heats the water in the water tank. Allow the appliance plenty of time to cool down before attempting to repair or replace any component.If the heating element is not glowing an orange or red color, this is an indication that the part may be bad. When the water in the water tank is not heating, it can be because this part is no longer working properly. This ring element is a durable replacement part. Wear work gloves to protect the hands during this process. Disconnect this appliance from the power source before starting to replace the part. Use caution during the replacement procedure.This part is sold individually and is sourced directly from the manufacturer. It is compatible with wall ovens that are manufactured by the Bosch brand, including Thermador and Gaggenau.

If your cooktop burner won't turn on or off properly, a faulty switch is often the cause. This replacement switch restores control to your cooktop.

This water inlet hose supplies fresh water to the appliance's fill system, restoring proper fill and preventing leaks where the original hose is cracked or worn. Durable replacement for the factory inlet connection. What it does

• Delivers incoming water from the home supply to the appliance's fill valve and tub.
• Restores normal fill when original hose is split, pinched, or leaking.
• Helps prevent intermittent or no-fill symptoms caused by damaged inlet tubing.
• Works with the appliance's existing clamps and fittings when installed correctly.

• One water inlet hose assembly as shown

• Turn off water supply and disconnect power before replacing the hose.
• Inspect fittings and replace any damaged clamps or seals; tighten to a secure, leak-free fit.
• Route the hose to avoid kinks and pinching; test with a short fill cycle and check for leaks.

This water drain hose routes wastewater from the appliance to the household drain so the unit can empty properly. Durable flexible hose built to resist kinks and normal wear, restoring reliable draining and preventing pooling. What it does:

• Directs wastewater from the appliance pump to the drain plumbing
• Replaces cracked, split, collapsed or clogged drain tubing
• Helps stop leaks, slow draining, and water pooling in the appliance base
• Works with the appliance's pump and drain fittings to maintain proper flow

• Turn off and unplug the appliance and shut off water supply before starting
• Remove access panels as needed to reach hose connections; note routing before removal
• Ensure hose is seated fully on fittings and secured with the proper clamps; avoid sharp bends or kinks
• Test for leaks after reconnecting power and water; for routing specifics

This safety device monitors oven temperature and shuts off heating elements if temperatures exceed safe limits. Replace when oven overheats, fails to reach proper temperatures, or heating elements cycle on and off erratically.

This protective glass cover shields the interior light bulb inside the oven cavity from heat and food splatter. Replace when cracked, discolored, or completely shattered, which can expose the bulb to damage.