Gaggenau Range ED230610 Parts

This water inlet hose supplies fresh water to the appliance's fill system, restoring proper fill and preventing leaks where the original hose is cracked or worn. Durable replacement for the factory inlet connection. What it does

• Delivers incoming water from the home supply to the appliance's fill valve and tub.
• Restores normal fill when original hose is split, pinched, or leaking.
• Helps prevent intermittent or no-fill symptoms caused by damaged inlet tubing.
• Works with the appliance's existing clamps and fittings when installed correctly.

• One water inlet hose assembly as shown

• Turn off water supply and disconnect power before replacing the hose.
• Inspect fittings and replace any damaged clamps or seals; tighten to a secure, leak-free fit.
• Route the hose to avoid kinks and pinching; test with a short fill cycle and check for leaks.

This water drain hose routes wastewater from the appliance to the household drain so the unit can empty properly. Durable flexible hose built to resist kinks and normal wear, restoring reliable draining and preventing pooling. What it does:

• Directs wastewater from the appliance pump to the drain plumbing
• Replaces cracked, split, collapsed or clogged drain tubing
• Helps stop leaks, slow draining, and water pooling in the appliance base
• Works with the appliance's pump and drain fittings to maintain proper flow

• Turn off and unplug the appliance and shut off water supply before starting
• Remove access panels as needed to reach hose connections; note routing before removal
• Ensure hose is seated fully on fittings and secured with the proper clamps; avoid sharp bends or kinks
• Test for leaks after reconnecting power and water; for routing specifics

This is a temperature limiter (thermoprotector) that acts as a safety device inside a microwave. It monitors internal temperatures and cuts power to the heating components if the appliance overheats, preventing damage or fire. Replace this part if the microwave shuts off unexpectedly during use, fails to heat, or if testing shows the limiter has tripped and no longer resets.

This protective glass cover shields the interior light bulb inside the oven cavity from heat and food splatter. Replace when cracked, discolored, or completely shattered, which can expose the bulb to damage.

This is a connection piece used in ranges and ovens to join internal plumbing or drainage components. It ensures a secure, leak-free connection between fittings. Replace this part if you notice leaks, cracks, or a loose connection at the joint where it is installed.

This lever is the replacement control lever for the steam vent in compatible Bosch countertop ovens and steam/combination ovens, restoring proper vent opening and steam release during cooking cycles. What it does:

• Replaces a worn or broken steam vent lever that won't open or close reliably
• Restores manual control of the oven's steam vent to help normal venting during operation
• Addresses symptoms such as a loose, stuck, or missing vent lever and visible steam leakage from the vent area
• Works as the mechanical interface between the vent mechanism and the oven exterior

• One steam vent lever

• High-level replacement — remove power and allow unit to cool before servicing
• May require access to the oven door or control area; keep fasteners and brackets organized
• Handle small plastic parts carefully to avoid breakage during installation