Gaggenau Freezer RB491200 Parts

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This is a housing component used inside the freezer section of the refrigerator. It serves as a protective enclosure for internal parts such as sensors, lights, or fan assemblies, helping to keep them properly positioned and shielded. Replace this housing if it is cracked, broken, or warped, which can affect the proper operation of the components it protects.

Factory trim strip that finishes edges and covers seams on your refrigerator. Replace if cracked, worn, or missing to restore clean appearance.

Secures internal components to reduce vibration and noise in your refrigerator. Replace if broken or loose to restore stability. Verify fit with your model.

This is an interior fixture assembly used inside the refrigerator or freezer compartment. It serves as a mounting bracket or support structure for internal components such as lighting or shelving hardware. Replace this fixture if it is cracked, broken, or no longer holds components securely in position.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

This replacement cover is a protective outer piece that helps keep internal components safe from moisture, dust and debris. It restores the original enclosure and helps reduce vibration and noise caused by damaged or missing covers. What it does

• Protects wiring, connectors and nearby components from moisture and contaminants
• Keeps small parts secured and helps prevent rubbing or vibration against moving components
• Helps stop visible rattling or scraping caused by a cracked or missing cover
• Useful when the original cover is cracked, warped, broken or otherwise damaged

• One replacement cover

• Disconnect power to the appliance before starting any repair
• Confirm orientation and clip locations before removing the old cover to avoid breaking fasteners
• Use gentle pressure to seat the cover; do not force broken clips—replace fasteners if needed

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Seals the refrigerator door to prevent air leaks and maintain temperature. Replace if worn, cracked, or torn. Confirm fit with your model number.

Door hinge for refrigerators and freezers. Mounts between the cabinet and door to support proper swing and alignment. Replace if cracked or worn.

Replace a cracked or broken light fixture in your bottom-mount refrigerator. This housing mounts inside the cabinet to secure and protect the bulb.

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.

Connection piece for refrigerator assembly. Replaces broken, cracked, or missing connector parts. Ensures secure attachment between components.