Gaggenau Freezer RB492301 Parts

This hinge pin secures the door hinge mechanism and allows your refrigerator or freezer door to pivot smoothly. It maintains proper door alignment and prevents the door from sagging or binding. Replace this part if your door won't close properly, sags when opened, or if you hear squeaking or grinding when opening the door.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Interior cabinet divider wall that restores proper compartment separation in your refrigerator. Replaces cracked, broken, or missing dividers.

This factory strip is a trim piece that finishes and protects an exposed edge or gap on your appliance. Replacing a cracked or missing strip restores a clean look and helps panels align and stay secure. What it does

• Finishes an exposed seam or edge as designed by the manufacturer
• Helps keep adjacent panels aligned and secure
• Can reduce vibration-related rattles when properly seated
• Common signs of failure: loose or missing trim, visible gaps, warping, cracks, or buzzing/rattling noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Note the strip's orientation; remove any screws/clips and gently release tabs
• Reuse or transfer original fasteners/clips as required by your model
• Align carefully and avoid overtightening to prevent damage to the strip or surrounding panels

Fixes unresponsive controls, display errors, or cycle failures in refrigerators and freezers. Direct replacement for failed main control modules.

This replacement strip restores a clean, factory fit where it's used on the appliance. Replacing a worn or missing strip helps secure adjoining pieces, maintain spacing, and eliminate unsightly gaps or vibration-related noise. What it does:

• Acts as a finishing/spacer strip between adjoining components
• Helps hold trim or panel pieces in the correct position
• Maintains alignment and clearances to prevent rubbing or rattling
• Common symptoms: cracked or missing strip, visible gap, loose trim/panel, buzzing or vibration noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Refer to your model's parts diagram for the correct orientation and attachment points
• Reuse original screws/clips if required; hardware is typically model-specific
• After installation, verify proper alignment and operation of adjacent panels/doors

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This active carbon filter uses charcoal media to help control and reduce food odors inside the appliance, improving interior air quality and helping your fridge smell fresher between cleanings. What it does:

• Adsorbs and neutralizes common food and cooking odors circulating in the appliance interior
• Helps reduce lingering smells from strong foods like onions, fish, and cheeses
• Works with the appliance's air circulation system to maintain a fresher-smelling cavity
• Can help extend periods between intensive cleanings by reducing odor buildup

• Locate the filter access per your appliance owner's manual and remove the old filter before installing
• Slide or seat the new filter into the housing until it clicks or is secure; confirm proper orientation
• Replace filters according to the appliance manufacturer's recommended interval
• Dispose of used filters according to local regulations; avoid ingesting charcoal contents and wash hands after handling

This is a strip that helps release ice from the ice maker mold so cubes can drop into the storage bin. It acts as a guide or ejector aid during the ice harvesting cycle. Replace this part if ice cubes are not ejecting properly, getting stuck in the mold, or if the ice maker produces misshapen or clumped ice.

Replace damaged or missing insulation panel inside your refrigerator cabinet. Restores thermal control and reduces noise. Use when original is torn or worn.

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A single mounting screw used to secure appliance panels and components. This genuine replacement restores proper fastening to prevent loose trim, panels, or brackets and helps stop rattles or movement. What it does:

• Fastens panels, trim pieces, or internal brackets to the appliance frame
• Restores secure attachment where a screw is stripped, lost, or damaged
• Reduces vibration-related noise from loose panels or parts
• Works with the original threads and mounting points for correct fit

• One mounting screw

• Use the correct driver to avoid stripping the screw head
• Tighten until snug; do not overtighten to prevent damage to threads or panels
• Disconnect power and follow appliance safety guidelines before working on the unit
• If replacing multiple fasteners, verify all similar screws are the correct length and type

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a slide rail that mounts inside the freezer compartment and allows the freezer drawer to glide in and out smoothly. It attaches to the interior wall of the freezer section and supports the weight of the drawer and its contents. Replace this part if the freezer drawer is difficult to open or close, feels wobbly, or no longer slides evenly on its track.