Gaggenau Freezer RB492701 Parts

This factory strip is a trim piece that finishes and protects an exposed edge or gap on your appliance. Replacing a cracked or missing strip restores a clean look and helps panels align and stay secure. What it does

• Finishes an exposed seam or edge as designed by the manufacturer
• Helps keep adjacent panels aligned and secure
• Can reduce vibration-related rattles when properly seated
• Common signs of failure: loose or missing trim, visible gaps, warping, cracks, or buzzing/rattling noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Note the strip's orientation; remove any screws/clips and gently release tabs
• Reuse or transfer original fasteners/clips as required by your model
• Align carefully and avoid overtightening to prevent damage to the strip or surrounding panels

Fixes unresponsive controls, display errors, or cycle failures in refrigerators and freezers. Direct replacement for failed main control modules.

This replacement strip restores a clean, factory fit where it's used on the appliance. Replacing a worn or missing strip helps secure adjoining pieces, maintain spacing, and eliminate unsightly gaps or vibration-related noise. What it does:

• Acts as a finishing/spacer strip between adjoining components
• Helps hold trim or panel pieces in the correct position
• Maintains alignment and clearances to prevent rubbing or rattling
• Common symptoms: cracked or missing strip, visible gap, loose trim/panel, buzzing or vibration noises

• 1 strip

• Disconnect power and, if applicable, shut off water before servicing
• Refer to your model's parts diagram for the correct orientation and attachment points
• Reuse original screws/clips if required; hardware is typically model-specific
• After installation, verify proper alignment and operation of adjacent panels/doors

This is a small wheel designed for use in a refrigerator or freezer, typically mounted on a shelf, drawer, or rack to allow smooth sliding in and out. It helps support the weight of stored items while enabling easy access. Replace this wheel if it is cracked, broken, or no longer rolling freely, causing drawers or racks to stick or sit unevenly.

Factory trim strip that finishes edges and covers seams on your refrigerator. Replace if cracked, worn, or missing to restore clean appearance.

Installation hardware set for refrigerators. Includes mounting brackets, screws, and fasteners needed to secure your appliance during setup or replacement.

Fix ice buildup or cooling issues with this refrigerator evaporator coil. Resolves uneven temperatures and frost accumulation in freezer compartments.

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This active carbon filter uses charcoal media to help control and reduce food odors inside the appliance, improving interior air quality and helping your fridge smell fresher between cleanings. What it does:

• Adsorbs and neutralizes common food and cooking odors circulating in the appliance interior
• Helps reduce lingering smells from strong foods like onions, fish, and cheeses
• Works with the appliance's air circulation system to maintain a fresher-smelling cavity
• Can help extend periods between intensive cleanings by reducing odor buildup

• Locate the filter access per your appliance owner's manual and remove the old filter before installing
• Slide or seat the new filter into the housing until it clicks or is secure; confirm proper orientation
• Replace filters according to the appliance manufacturer's recommended interval
• Dispose of used filters according to local regulations; avoid ingesting charcoal contents and wash hands after handling

This is a strip that helps release ice from the ice maker mold so cubes can drop into the storage bin. It acts as a guide or ejector aid during the ice harvesting cycle. Replace this part if ice cubes are not ejecting properly, getting stuck in the mold, or if the ice maker produces misshapen or clumped ice.

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

Replace damaged or missing insulation panel inside your refrigerator cabinet. Restores thermal control and reduces noise. Use when original is torn or worn.

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation