Gaggenau Refrigerator RC472700 Parts

This replacement heating element warms dishwasher wash water to help detergents dissolve and improve cleaning and drying performance. Designed to restore proper water temperature for normal wash cycles when the original heater fails. What it does:

• Heats wash water so detergents activate and soils break down during the main wash.
• Helps the rinse/dry phase reach higher temperatures for improved drying and sanitizing.
• Common symptoms: dishes not getting clean, poor drying, unusually long cycles, or no heat during cycles.
• Works as the direct replacement for a failed or damaged tub heater assembly.

• Always disconnect power to the appliance before starting work; verify power is off at the breaker.
• Access typically requires removing the lower kick panel or toe panel—handle internal components and wiring with care.
• Inspect mounting gaskets and wiring for damage; replace any corroded connectors or compromised seals.
• After installation, restore power and run a short test cycle to check for leaks.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

This is a small wheel designed for use in a refrigerator or freezer, typically mounted on a shelf, drawer, or rack to allow smooth sliding in and out. It helps support the weight of stored items while enabling easy access. Replace this wheel if it is cracked, broken, or no longer rolling freely, causing drawers or racks to stick or sit unevenly.

Buttons not responding or cycles won't change? This control panel module restores user interface function and proper command communication in your refrigerator.

This is a wheel assembly designed for use in a refrigerator or freezer. It supports the smooth rolling movement of components such as drawers, baskets, or the unit itself. Replace this wheel if it is cracked, worn, or no longer rolling freely, which can cause drawers to stick or the appliance to be difficult to move.

Replaces burnt out or dim refrigerator interior light bulb to restore clear visibility. Install when light fails to illuminate. Verify fit with your model.

This active carbon filter uses charcoal media to help control and reduce food odors inside the appliance, improving interior air quality and helping your fridge smell fresher between cleanings. What it does:

• Adsorbs and neutralizes common food and cooking odors circulating in the appliance interior
• Helps reduce lingering smells from strong foods like onions, fish, and cheeses
• Works with the appliance's air circulation system to maintain a fresher-smelling cavity
• Can help extend periods between intensive cleanings by reducing odor buildup

• Locate the filter access per your appliance owner's manual and remove the old filter before installing
• Slide or seat the new filter into the housing until it clicks or is secure; confirm proper orientation
• Replace filters according to the appliance manufacturer's recommended interval
• Dispose of used filters according to local regulations; avoid ingesting charcoal contents and wash hands after handling

Fix frost buildup and icing issues in your refrigerator with this defrost heater. Melts accumulated frost to maintain optimal temperature and airflow.

Decorative trim piece that covers the exposed door edge or seam on your refrigerator. Replace when cracked, peeling, or missing to restore the finished look.

Secures internal components to reduce vibration and noise in your refrigerator. Replace if broken or loose to restore stability. Verify fit with your model.

This is an interior fixture assembly used inside the refrigerator or freezer compartment. It serves as a mounting bracket or support structure for internal components such as lighting or shelving hardware. Replace this fixture if it is cracked, broken, or no longer holds components securely in position.

Support bracket for bottom-mount refrigerators. Replaces broken, cracked, or missing structural support. Ensures proper alignment and stability.

Interior dividing wall panel for refrigerators and freezers. Separates compartments and maintains organization. Replace if cracked, warped, or missing.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

This is a fixture component that secures or supports the piston pin mechanism inside a freezer, typically related to the door hinge or lid assembly. It helps ensure smooth door operation and proper alignment. Replace this fixture if your freezer door is sagging, not closing properly, or if the original fixture is cracked or missing.