Gaggenau Freezer RY491200 Parts

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation

If your refrigerator isn't cooling properly or cycles erratically, a faulty temperature sensor is often the cause. This NTC thermistor restores regulation.

Mounting hardware kit secures refrigerator components in place. Replaces worn, missing, or damaged fasteners that cause rattling or loose parts inside unit.

Small plastic clip that secures components inside your refrigerator. Replace if cracked, broken, or missing to restore proper fit and alignment.

This hinge pin secures the door hinge mechanism and allows your refrigerator or freezer door to pivot smoothly. It maintains proper door alignment and prevents the door from sagging or binding. Replace this part if your door won't close properly, sags when opened, or if you hear squeaking or grinding when opening the door.

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement mounting fixture for bottom-mount refrigerators. Secures internal components and keeps panels or racks properly aligned. Needed when broken or worn.

Restores proper door alignment and smooth operation. Replace if your refrigerator door sags, drags, or has uneven gaps. Verify fit with your model number.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

Fixes unresponsive controls, display errors, or cycle failures in refrigerators and freezers. Direct replacement for failed main control modules.

Installation hardware set for refrigerators. Includes mounting brackets, screws, and fasteners needed to secure your appliance during setup or replacement.

This is a small wheel designed for use in a refrigerator or freezer, typically mounted on a shelf, drawer, or rack to allow smooth sliding in and out. It helps support the weight of stored items while enabling easy access. Replace this wheel if it is cracked, broken, or no longer rolling freely, causing drawers or racks to stick or sit unevenly.

Interior cabinet divider wall that restores proper compartment separation in your refrigerator. Replaces cracked, broken, or missing dividers.

This active carbon filter uses charcoal media to help control and reduce food odors inside the appliance, improving interior air quality and helping your fridge smell fresher between cleanings. What it does:

• Adsorbs and neutralizes common food and cooking odors circulating in the appliance interior
• Helps reduce lingering smells from strong foods like onions, fish, and cheeses
• Works with the appliance's air circulation system to maintain a fresher-smelling cavity
• Can help extend periods between intensive cleanings by reducing odor buildup

• Locate the filter access per your appliance owner's manual and remove the old filter before installing
• Slide or seat the new filter into the housing until it clicks or is secure; confirm proper orientation
• Replace filters according to the appliance manufacturer's recommended interval
• Dispose of used filters according to local regulations; avoid ingesting charcoal contents and wash hands after handling

Factory trim strip that finishes edges and covers seams on your refrigerator. Replace if cracked, worn, or missing to restore clean appearance.