Kenmore Refrigerator 106.50343010 (10650343010, 106 50343010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11807379
Do-It-Yourself Stories from Customers like You
The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015
We bought a new ice guard and installed it. It is working really good now.
Read more
More
$22.78
- Compare At:
-
$25.05
- You Save:
-
$2.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10295082
Ice not dispensing or auger broken? This refrigerator ice crusher auger transfers ice from bucket to dispenser. Moderate DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
Auger broken in ice bucket Michael D. • Albuquerque , NM • February 03, 2025
Replaced the auger
Read more
More
$92.60
- Compare At:
-
$110.19
- You Save:
-
$17.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$15.40
- Compare At:
-
$16.94
- You Save:
-
$1.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 1110560
Bearing body bracket for refrigerator assembly. Secures and supports internal components. Replace if cracked, broken, or damaged to restore proper fit.
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 2212996
Secures the compressor to the refrigerator frame. Replace if strap is cracked, broken, or missing to properly mount and stabilize the compressor unit.
More
$8.95
- Compare At:
-
$10.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10185566
Mounting bracket for refrigerator interior components. Secures shelves, bins, or panels in place. Replace if cracked, bent, or broken to restore stability.
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W10355489
Refrigerator not cooling or running constantly? The compressor circulates refrigerant to maintain proper temperature. Expert-level repair component.
More
$381.56
- Compare At:
-
$478.40
- You Save:
-
$96.84
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
$14.00
- Compare At:
-
$14.89
- You Save:
-
$0.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276341
The Snack Pan Shelf is an OEM part for Whirlpool refrigerators. It provides an additional level of storage space on the inside.
The shelf is designed to fit securely on the side walls of the fridge cavity measuring 18 inches wide by 18-1/2 inches deep. If you need a shelf with a curved front, order WPW10276348.
Symptoms of a bad snack pan shelf include:
- Cracks or breaks in the shelf material
- Inability to lock the shelf into the desired position
- Wobbling or instability
- Missing retainers that hold the shelf in place
Causes of a bad shelf can be normal wear and tear over time from repeated removal and washing. Accidental drops or impact damage may also affect structural integrity.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
My snack drawer broke Stacy P. • Reading , PA • November 08, 2015
I tried duct tape but then decided to buy the parts from Appliance Pro's and fix it correctly. It looks brand new now. Thank You :)
Read more
More
$159.60
- Compare At:
-
$188.33
- You Save:
-
$28.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671W
White overflow grille for refrigerator water/ice dispenser. Replaces cracked, pitted, discolored, or missing grilles. Snaps into place below dispenser.
Do-It-Yourself Stories from Customers like You
My kitchen aid overflow grille was getting pitted and hard to clean they no longer had the part available at whirlpool Geoffrey K. • Eugene , OR • December 11, 2014
I found the part I needed through AppliancePartsPros.com. The price was far more than I wanted to spend, but my wife kept asking me to get a replacement. "Any port in a storm" as the old saying goes. I'm keeping it clean for the time being. When company comes over, I'll put it in to make the refrigerator look good.
Read more
More
$56.34
- Compare At:
-
$67.04
- You Save:
-
$10.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018
This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.
- Locks the bearing/stack onto the shaft to prevent loosening
- Maintains alignment for smooth rotation and reduced vibration
- Helps restore consistent drive in shaft-driven assemblies
- Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
- Disconnect power before servicing; shut off water if working near dispenser components
- Remove the related assembly to access the shaft; note part order for reassembly
- Hand-start the nut to avoid cross-threading; verify thread direction against the original
- Tighten securely; inspect the bearing, washers/spacers, and shaft for wear
Do-It-Yourself Stories from Customers like You
The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes Morgan H. • Childersburg , AL • June 11, 2015
Replaced bearing nut with new one,took about 30 minutes.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Out Of Stock
Usually ships within 4 - 14 days