Kenmore Refrigerator 106.54786804 (10654786804, 106 54786804) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10896764
Fix uneven cooling and warm spots in your refrigerator with this air baffle. Directs cold air properly throughout compartments. Simple DIY fix.
More
$51.95
- Compare At:
-
$61.30
- You Save:
-
$9.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W10166878
Refrigerator roll pin secures moving parts and mechanical assemblies. Replace if pin is missing, damaged, or causing loose components in your unit.
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Whirlpool part
By: Whirlpool
Part Number: W11225843
Wire harness for side-by-side refrigerators. Provides electrical connections between components. Replace if damaged, frayed, or worn from use.
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W11553819
This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does
- Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
- Helps isolate vibrating components from appliance chassis to lower perceived sound.
- Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
- Useful when worn, detached or hardened factory pads allow increased noise.
What's included
- One insul-sound deadening pad
Install notes
- Disconnect power before servicing an appliance to avoid shock or injury.
- Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
- Replace only in the original location; do not cover vents or moving parts.
- If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11606038
Fix a refrigerator with no interior light using this light socket. Simple DIY repair that takes about 15 minutes with basic tools. Fits most models.
More
$44.25
- Compare At:
-
$53.10
- You Save:
-
$8.85
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$13.16
- Compare At:
-
$13.30
- You Save:
-
$0.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276792
The Water Reservoir Tubing is an OEM replacement part for Whirlpool refrigerators. It is a flexible plastic tubing that replaces the water reservoir and holds the water for the ice maker and dispenser.
Causes can include cracks from heat or cold exposure over time, punctures from sharp edges during installation, or deterioration of plastic tubing that impacts integrity.
Symptoms of bad water reservoir tubing include:
- Inaccurate or inconsistent ice production
- Leaks or water spills near the reservoir or ice maker
- Kinks or ruptures in the tubing that obstruct water flow
- Mineral buildup that clogs or restricts the line
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Note: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.
Do-It-Yourself Stories from Customers like You
Water in refrigerator dispenser smelled like rotten eggs Dale L. • Phoenix , AZ • July 29, 2018
Replaced water reservoir that had become contaminated with ??? Also had to replace the water filter, because the water contaminated it also. Cost was about $150, for two filters and the reservoir. The first filter was replaced because I did not know the reservoir was contaminated, and no water was coming out of the dispenser. Since the water in the ice maker did not come through the reservoir, there was no smell or contamination there. The new filter enabled water to come through the dispenser,...
Read more
More
$76.59
- Compare At:
-
$91.14
- You Save:
-
$14.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10300025
Ice cubes stuck in tray or not releasing? This ice mold and heater assembly warms the tray during harvest to release cubes cleanly into the bin.
Do-It-Yourself Stories from Customers like You
The icemaker made icebergs & icicles. Jerry C. • Haines City , FL • May 07, 2022
I replaced the ice bucket that broke & also the ice mold tray that was leaking water.
Read more
More
$109.95
- Compare At:
-
$130.84
- You Save:
-
$20.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856867
Small metal washer for refrigerator assemblies. Distributes load under bolts and nuts to keep components secure. Replace if lost, damaged, or worn.
More
$6.67
- Compare At:
-
$7.73
- You Save:
-
$1.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203407B
Black plastic hinge cover for side-by-side refrigerators. Replaces cracked, broken, or missing hinge covers on the refrigerator door assembly.
More
$13.86
- Compare At:
-
$16.31
- You Save:
-
$2.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 628532
Freezer not cold enough or stuck in defrost mode? This defrost thermostat regulates defrost cycles to prevent ice buildup and maintain proper cooling.
More
$57.95
- Compare At:
-
$68.96
- You Save:
-
$11.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10184890
Color: Midnight Grey
Do-It-Yourself Stories from Customers like You
Broken plastic "toe kick" and cartridge cap Len L. • Wittmann , AZ • September 12, 2019
Removed front plastic and cartridge cap. Replaced with provided parts. The task easier if frig and freezer doors are opened. Makes removal and installation alignment much easier. Time, approximately 5 minutes.
Read more
More
$109.95
- Compare At:
-
$130.84
- You Save:
-
$20.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203408W
White plastic hinge cover for refrigerator doors. Replaces cracked, broken, or missing hinge covers that expose door hardware. Snaps into place.
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Out Of Stock
Usually ships within 4 - 14 days