Kenmore Refrigerator 106.56999602 (10656999602, 106 56999602) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11500948
Mounting bracket that secures the ice maker assembly to the refrigerator wall. Replace if cracked, broken, or missing to restore proper ice maker support.
Do-It-Yourself Stories from Customers like You
Not making ice. Alan S. • Las Vegas , NV • May 17, 2020
Replaced the ice maker. The kit came with everything I needed to replace the ice maker. Parts that did not come with the kit were re-used from the old one. My Whirlpool refrig/freezer is an older model so the wiring harness that came with the kit was different from my existing. So instead of disconnecting the ice maker wiring harness from the freezer, I had to disconnect the harness at the ice maker. That was a b..... Anyway after about 20 minutes, finally unhooked the connector. I had...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388500
Replacement door gasket seals your refrigerator to maintain temperature and prevent air leaks. Replace when worn or cracked to restore efficiency.
More
$47.41
- Compare At:
-
$56.89
- You Save:
-
$9.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 2324712
Refrigerator not cooling or freezer too warm? A faulty condenser may be the cause. This part helps dissipate heat for proper cooling performance.
More
$178.67
- Compare At:
-
$214.40
- You Save:
-
$35.73
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11553819
This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does
- Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
- Helps isolate vibrating components from appliance chassis to lower perceived sound.
- Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
- Useful when worn, detached or hardened factory pads allow increased noise.
What's included
- One insul-sound deadening pad
Install notes
- Disconnect power before servicing an appliance to avoid shock or injury.
- Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
- Replace only in the original location; do not cover vents or moving parts.
- If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.
More
$21.46
- Compare At:
-
$25.32
- You Save:
-
$3.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$13.16
- Compare At:
-
$13.30
- You Save:
-
$0.14
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
$12.51
- Compare At:
-
$14.89
- You Save:
-
$2.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10321304
Clear plastic storage bin that attaches to the refrigerator door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Needed extra door shelf bins for dry ingredients. ordered wrong size thru ebay. Kay S. • Aiea , HI • March 12, 2014
While looking for parts thru AppliancePartsPros.com, I found a diagram with my refrig model #
for the door shelf bin. It was a perfect match. Prior to that I've spent countless hours searching
and became very frustrated. The diagrams and videos were very helpful.
Thank you,
KShigeta
Read more
More
$47.41
- Compare At:
-
$55.94
- You Save:
-
$8.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2174267
Wire shelf for refrigerator freezer compartment. Holds frozen food items securely. Replace if cracked, bent, sagging, or missing to restore storage space.
Do-It-Yourself Stories from Customers like You
I needed a new shelf for my freezer Michael G. • Toledo , OH • July 22, 2016
I ordered one from you.
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2171157
Replace a cracked, broken, or missing refrigerator trivet shelf insert. Adds a usable storage level inside compartments to keep items organized.
Do-It-Yourself Stories from Customers like You
I broke a freezer door shelf while helping my son and daughter in law clean for a move Vicki P. • San Antonio , TX • July 15, 2017
Just ordered a new part and put it in.
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018
This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.
- Locks the bearing/stack onto the shaft to prevent loosening
- Maintains alignment for smooth rotation and reduced vibration
- Helps restore consistent drive in shaft-driven assemblies
- Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
- Disconnect power before servicing; shut off water if working near dispenser components
- Remove the related assembly to access the shaft; note part order for reassembly
- Hand-start the nut to avoid cross-threading; verify thread direction against the original
- Tighten securely; inspect the bearing, washers/spacers, and shaft for wear
Do-It-Yourself Stories from Customers like You
The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes Morgan H. • Childersburg , AL • June 11, 2015
Replaced bearing nut with new one,took about 30 minutes.
Read more
More
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203407B
Black plastic hinge cover for side-by-side refrigerators. Replaces cracked, broken, or missing hinge covers on the refrigerator door assembly.
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Out Of Stock
Usually ships within 4 - 14 days