Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Kenmore Refrigerator 106.57163702 (10657163702, 106 57163702) Parts

Cork Sealer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP503695

Size: 1/4 lb.

More
$57.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Putty Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587

Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.

Do-It-Yourself Stories from Customers like You High level of noise with each compressor cycle   Bruce H. • Bonita Springs , FL • July 24, 2015

The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat. Read more

More
$75.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Service Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025

Size: 1/4 inch.

More
$45.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Arm-Shut
Genuine Whirlpool part
By: Whirlpool
Part Number: W11807379

 

Do-It-Yourself Stories from Customers like You The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made   Sandy S. • Yantis , TX • August 22, 2015

We bought a new ice guard and installed it. It is working really good now. Read more

More
$22.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Ice Crusher Auger
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10295082

Ice not dispensing or auger broken? This refrigerator ice crusher auger transfers ice from bucket to dispenser. Moderate DIY repair in 30 minutes.

Do-It-Yourself Stories from Customers like You Auger broken in ice bucket   Michael D. • Albuquerque , NM • February 03, 2025

Replaced the auger Read more

More
$92.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Support Plate Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358

Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Insul-Sound Deadening Pad (3.2 X 50 X 50)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11553819

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

  • Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
  • Helps isolate vibrating components from appliance chassis to lower perceived sound.
  • Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
  • Useful when worn, detached or hardened factory pads allow increased noise.
What's included
  • One insul-sound deadening pad
Install notes
  • Disconnect power before servicing an appliance to avoid shock or injury.
  • Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
  • Replace only in the original location; do not cover vents or moving parts.
  • If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

More
$9.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Sleeve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592

 

More
$15.40

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Bearing Body Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 1110560

Bearing body bracket for refrigerator assembly. Secures and supports internal components. Replace if cracked, broken, or damaged to restore proper fit.

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Condenser
Genuine Whirlpool part
By: Whirlpool
Part Number: 2324712

Refrigerator not cooling or freezer too warm? A faulty condenser may be the cause. This part helps dissipate heat for proper cooling performance.

More
$178.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Compressor
Genuine Whirlpool part
By: Whirlpool
Part Number: W10355489

Refrigerator not cooling or running constantly? The compressor circulates refrigerant to maintain proper temperature. Expert-level repair component.

More
$381.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556

Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.

More
$14.00

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Air Damper Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374

Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.

Do-It-Yourself Stories from Customers like You My freezer was cooling but not fridge   Charnel C. • North Lauderdale , FL • January 24, 2017

Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go. Read more

More
$49.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Cover-Unit (Refrigerator)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188756

This refrigerator unit cover mounts over the interior control/air distribution housing. It restores a clean, finished look and protects internal components by enclosing the area as designed. What it does:

  • Provides a protective, finished cover for the control/diffuser housing
  • Helps keep the airflow path properly enclosed inside the compartment
  • Replace if the cover is cracked, warped, loose, or missing
  • Common signs include rattling, visible gaps, or exposed components
What's included:
  • One unit cover
Install notes:
  • Unplug the refrigerator before servicing
  • Remove shelves or bins for access as needed
  • Release tabs or remove screws to take off the old cover; retain hardware for reuse
  • Align and secure the new cover; do not overtighten fasteners, then restore power

Do-It-Yourself Stories from Customers like You Cover unit in back of refrigerator need to be replaced   Lawrence T. • Catalina , AZ • March 20, 2016

VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT. Read more

More
$82.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400906

Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.

Do-It-Yourself Stories from Customers like You Broken ice maker door and tabs   David G. • San Antonio , TX • December 22, 2018

Through your website and YouTube DIY’s I was able to find the parts for my specific refrigerator and fix it, the wife had been after me for over a year to fix it and did not. I was ready to buy a new refrigerator but decided to try and fix it myself you guys rock ! Read more

More
$7.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Bearing Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018

This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.

  • Locks the bearing/stack onto the shaft to prevent loosening
  • Maintains alignment for smooth rotation and reduced vibration
  • Helps restore consistent drive in shaft-driven assemblies
  • Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
  • Disconnect power before servicing; shut off water if working near dispenser components
  • Remove the related assembly to access the shaft; note part order for reassembly
  • Hand-start the nut to avoid cross-threading; verify thread direction against the original
  • Tighten securely; inspect the bearing, washers/spacers, and shaft for wear

Do-It-Yourself Stories from Customers like You The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes   Morgan H. • Childersburg , AL • June 11, 2015

Replaced bearing nut with new one,took about 30 minutes. Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google