Kenmore Refrigerator 106.73909301 (10673909301, 106 73909301) Parts

Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more

Removed the back cover to access the fan area. Clean the area with brush and vac first. Unplugged the Refrigerator. Used a socket set with 1/4" socket. Had an extended and a standard socket. Removed the condensate plastic drain from the bottom of the refrigerator to have more access to the fan. Unplugged the fan motor. Removed the two screws holding the fan in place. Removed the fan unit from the condenser side of the bracket. Place new fan on the fan and installed exactly the way I removed the... Read more

Replacer both gaskets but had to install some sealant to bottom of ff door at liner behind gasket lip. Read more

With new part - three screws to re-attach the motor to the plastic housing- most difficult part was putting two rubber caskets in slots attached to fridge metal plate I could not find any suggestions on line so I forced it in- hopefully not breaking this $100 part - it did not seat perfect but all is done and fan runs properly Read more

Replaced it with a new one Read more

Following the general guidance from the online video (fridge shown of course didn't exactly match mine) gutted the inside of the fridge enough to remove the water line. Replaced with new line, reversed gutting process on fridge. New line fixed the issue with the "clear stringy stuff" floating in the dispensed water. Read more