Kenmore Refrigerator 106.7690812 (1067690812, 106 7690812) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP542638
Fix squeaking or grinding ice makers with appliance-grade grease. Lubricates moving parts in refrigerators and freezers. Simple DIY application.
More
$44.24
- Compare At:
-
$52.65
- You Save:
-
$8.41
Genuine Whirlpool part
By: Whirlpool
Part Number: 520965
This screw support secures the dryer drum ladder assembly, helping maintain proper alignment and stable rotation for reliable drying performance. It replaces a worn or broken support to reduce noise and rattling during operation. What it does:
- Holds the ladder/support bracket in place so the drum rotates smoothly.
- Prevents excessive movement that can cause scraping, knocking, or rubbing noises.
- Restores correct positioning to reduce wear on adjacent components.
- Suitable when the original support is cracked, bent, or missing fastener points.
What's included:
- One screw support (ladder) as shown.
Install notes:
- Intended for experienced DIYers; confirm compatibility with your model before installing.
- Disconnect power (unplug electric or shut off gas and unplug) before beginning work.
- Handle small parts carefully and keep track of fasteners; use appropriate hand tools.
More
$20.67
- Compare At:
-
$24.60
- You Save:
-
$3.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3388228
This is a replacement mounting screw used to secure panels and components on compatible Whirlpool appliances, restoring loose or missing fasteners for safe, stable operation. What it does
- Fastens appliance panels, brackets, and small components in place
- Replaces stripped, rusted, or missing screws that cause rattling or loose parts
- Helps restore proper alignment and reduce vibration-related noise
- Matches OEM fit and function for straightforward replacement
What's included
Install notes
- Use the matching screwdriver or nut driver to avoid stripping the head
- Tighten until snug; do not overtighten to prevent thread or panel damage
- Turn off and unplug the appliance before accessing internal components
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WP965173
Replacement 8-18 thread screw for securing panels, brackets, and trim on appliances. Replace worn, stripped, or missing screws to keep components aligned.
More
$7.94
- Compare At:
-
$8.06
- You Save:
-
$0.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 212643
Sealer for refrigerant line insulation.
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Whirlpool part
By: Whirlpool
Part Number: 2215823
Secures air duct to housing, maintaining proper airflow alignment. Replace if broken or loose to prevent air leaks. Confirm fit with your model.
More
$9.17
- Compare At:
-
$9.46
- You Save:
-
$0.29
Genuine Whirlpool part
By: Whirlpool
Part Number: 978026
$56.34
- Compare At:
-
$67.04
- You Save:
-
$10.70
Genuine Whirlpool part
By: Whirlpool
Part Number: 978027
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: 978030
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2158826
This is a rubber or foam dampener designed to reduce vibration and noise from the compressor or refrigerant tubing. It attaches to the tubing or compressor mount to absorb vibrations during normal operation. Replace this dampener if you hear excessive rattling, buzzing, or vibration noises coming from the back or bottom of the refrigerator.
More
$2.70
- Compare At:
-
$2.97
- You Save:
-
$0.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488234
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP938213
Fix excess condensation or sweating on refrigerator doors with this power saver switch. Controls anti-sweat heater to prevent moisture buildup. Easy install.
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP978025
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Whirlpool part
By: Whirlpool
Part Number: 606755
This insulation bag fits inside the refrigerator or freezer door panel to help maintain consistent internal temperatures. It acts as a thermal barrier that prevents warm outside air from affecting the sealed compartment. Replace it if you notice condensation forming on the door interior, inconsistent temperatures, or if the existing insulation is torn, compressed, or missing.
More
$46.35
- Compare At:
-
$54.69
- You Save:
-
$8.34
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318083
Start relay for refrigerator compressors that helps the compressor begin running at power-up. Replacing a failed relay can restore normal starting behavior and resolve common startup symptoms. What it does
- Provides the initial start current path to the compressor during startup.
- Allows the compressor to reach running speed, then drops out once the motor is running.
- Common symptoms a bad relay may cause: compressor clicking, humming without starting, intermittent cooling or frequent cycling.
- Installed as the electrical component used only on compatible compressor assemblies.
What's included Includes one start relay. Install notes
- Disconnect power to the appliance before servicing to avoid electrical shock.
- Access the relay at the compressor; remove and replace the relay only after confirming diagnostics.
- Dispose of the old electrical part per local regulations.
Do-It-Yourself Stories from Customers like You
Freezer compressor (28 year old Sears cold spot) would not run. Michael J. • Eagle , WI • February 24, 2024
Replaced the start relay for ~$60 delivered.
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Out Of Stock
Usually ships within 4 - 14 days