Kenmore Refrigerator 106.9542811 (1069542811, 106 9542811) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half.
Read more
More
$54.25
- Compare At:
-
$64.02
- You Save:
-
$9.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119018
This bearing nut secures a bearing and related rotating components on the shaft, keeping the assembly tight and aligned for smooth, dependable operation. Replacing a worn or stripped nut helps stop wobble, noise, and drive slippage.
- Locks the bearing/stack onto the shaft to prevent loosening
- Maintains alignment for smooth rotation and reduced vibration
- Helps restore consistent drive in shaft-driven assemblies
- Typical symptoms: loose or non-turning drive, rattling/grinding, or visible thread damage
What's included: 1 bearing nut Install notes:
- Disconnect power before servicing; shut off water if working near dispenser components
- Remove the related assembly to access the shaft; note part order for reassembly
- Hand-start the nut to avoid cross-threading; verify thread direction against the original
- Tighten securely; inspect the bearing, washers/spacers, and shaft for wear
Do-It-Yourself Stories from Customers like You
The bearing nut on the ice maker auger wore out letting the auger drop down causing it to hang up on ice cubes Morgan H. • Childersburg , AL • June 11, 2015
Replaced bearing nut with new one,took about 30 minutes.
Read more
More
$7.34
- Compare At:
-
$8.07
- You Save:
-
$0.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1120581
This is the small motor assembly that opens and closes the ice chute door on the refrigerator's dispenser. It activates when the dispenser lever is pressed, allowing ice to pass through, and closes afterward to keep cold air from escaping. Replace this part if the ice chute door does not open when dispensing, stays stuck open allowing cold air to leak out, or makes grinding noises during operation.
Do-It-Yourself Stories from Customers like You
Water tube assembly. William R. • Tyler , TX • August 02, 2023
Used the parts ordered from AppliancePartsPros.com, along with Youtube video from AppliancePartsPros.com to replace the water tube assembly. Suggestions made in that video made the difference in making the repair or not making the repair.
Read more
More
$101.95
- Compare At:
-
$122.34
- You Save:
-
$20.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956
Almond. Size: 13 oz. can. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Age no money to fix it Ronald V. • Cape Coral , FL • August 01, 2015
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !!
Read more
More
$37.45
- Compare At:
-
$44.94
- You Save:
-
$7.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128
$9.05
- Compare At:
-
$9.38
- You Save:
-
$0.33
Genuine Whirlpool part
By: Whirlpool
Part Number: 285006
Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.
Do-It-Yourself Stories from Customers like You
My 1984 dishwasher that still works great was an eyesore & I didn't match my other appliances. Dorothy L. • Raleigh , NC • March 24, 2014
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius!
Read more
More
$48.26
- Compare At:
-
$57.91
- You Save:
-
$9.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1115290
Do-It-Yourself Stories from Customers like You
I had to replace a broken shelf stud Bill R. • New Carlisle , OH • March 24, 2019
I WATCHED THE VIDEO THAT YOU HAD ON THE PART THAT I ORDERED, AND I HAD NO PROBLEM INSTALLING THE PART. IF I DID NOT WATCH THE VIDEO., I THINK I WOULD BE IN TROUBLE. THANKS FOR THE VIDEO
Read more
More
$8.18
- Compare At:
-
$9.00
- You Save:
-
$0.82
Genuine Whirlpool part
By: Whirlpool
Part Number: WP72107
Touch-up paint for appliances in almond color. Repairs chips, scratches, and worn spots on ovens, refrigerators, microwaves, and dryers.
Do-It-Yourself Stories from Customers like You
Broken meat drawer Jesse B. • Stow , MA • January 26, 2015
Replaced. Shippping was very fast. A good experience.
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 511873
White porcelain touch-up paint for repairing chipped, scratched, or worn surfaces on ranges, ovens, and refrigerators. Restores appearance on exterior panels and trim. 2 oz. can.
Do-It-Yourself Stories from Customers like You
Paint had chipped from refrigerator Earl D. • Port Neches , TX • September 23, 2016
Simply painted over worked great
Read more
More
$34.75
- Compare At:
-
$41.00
- You Save:
-
$6.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843121
Drier tube for refrigerators. Installs in the sealed refrigeration system to remove moisture. Replace if cracked, corroded, or during compressor repairs.
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1108438
Extends the ice machine drain outlet for secure hose connection. Replace if cracked, broken, or missing to prevent leaks and ensure proper drainage.
More
$20.48
- Compare At:
-
$24.58
- You Save:
-
$4.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1114631
Secures interior shelves and rails to the refrigerator cabinet. Replace if broken, missing, or loose to restore proper support and prevent tilting shelves.
Do-It-Yourself Stories from Customers like You
Broken track stud shelf shelf frame and cover John K. • Hyde Park , NY • December 10, 2015
The broken track and shelf stud were the most important part of the repair. I was astounded to find parts for a 20 year old fridge. I was concerned about how to remove the damaged stud. As luck would have it, your site contained a video on how to remove it. Without the video, I would not have been so successful and would most likely have done more harm than good. All I needed for the repair was an open end wrench. It took about 30 seconds to remove and replace. I could not be more please...
Read more
More
$8.58
- Compare At:
-
$9.44
- You Save:
-
$0.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488878
Secures water supply hoses to fittings, preventing leaks in ice makers and refrigerators. Replace when rusted, bent, or losing grip. Verify fit.
More
$9.56
- Compare At:
-
$10.52
- You Save:
-
$0.96
Genuine Whirlpool part
By: Whirlpool
Part Number: WP999367
Secures panels, brackets, and internal components in appliances. Replace missing, stripped, or corroded screws to restore secure assembly and alignment.
Do-It-Yourself Stories from Customers like You
Handle on oven has loose and the plastic part at one end broke off. Graham W. • Pearl City , HI • January 20, 2018
Replacement end pieces and bar, and correct socket drive machine bolts to attach it were purchased. We reused the old bar, because it was white and the replacement part was only in black. Oven door just pulled off, 5 screws and it came apart to reveal the bolt holes. 10 min and was done.
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119020
Return spring provides tension for ice maker levers, door latches, or control rods. Replace if broken, stretched, or missing to restore proper snap-back.
More
$12.59
- Compare At:
-
$15.11
- You Save:
-
$2.52